Search:

Type: Posts; User: spanky

Page 1 of 16 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    1
    Views
    475

    [CQ] Re: MX-3070/MX-3071 fuser cleaning page

    System settings/ Image quality adjustment/ collective adjustment
  2. Replies
    7
    Views
    254

    Re: PN-L651H Aquos Board

    Have you removed the power supply board to check for a part number on it?
  3. Re: MX-3640N Not able to scan large files to email or USB

    Go into the system settings/scan settings.

    You can set the maximum size for email and other scans there.

    Be sure it is not set to a lower number than needed based on any limitations in the...
  4. Replies
    3
    Views
    369

    [CQ] Re: MX2640 missing image areas

    If you have removed the PTC before this happened, be sure it is installed properly.

    It can be installed so a part of it is elevated and rubs the toner off the page.
  5. Replies
    10
    Views
    1,138

    [Error Code] Re: Sharp AR-M550u Error F2 only

    On most Sharps if you have an F2 only and the machine still operates you have an issue with the temperature or humidity sensor.

    Most Sharps have these located in the right side door, not sure...
  6. Thread: sharp-mx2300n

    by spanky
    Replies
    1
    Views
    184

    Re: sharp-mx2300n

    Through the web page go into the users setup and disable users.
  7. Thread: Venting...

    by spanky
    Replies
    42
    Views
    6,292

    Re: Venting...

    I am 65 and don't know how much longer I can tolerate the customers who think they know more than me.

    I started in this business in 1986 and still haven't learned my lesson.

    Too late to try...
  8. Re: Sharp MX-6070v machine unable to print and photocopy

    You need a Sharp tech to contact Sharp with the serial number of your machine so Sharp can issue a password reset for your machine.

    Then you can follow the steps to disable the OSA function of the...
  9. Re: MX-8090N 11x17 Image Prints offset 2mm on Long Edge

    50-10
  10. Re: Sharp MX-6070v machine unable to print and photocopy

    You need to get into the external accounting settings and disable it.
  11. Replies
    12
    Views
    668

    Re: Printer MX-4111 not turning on

    Have you had control box2 out of the machine?

    I have found this can happen if it has been removed and upon installing it the contacts don't line up properly.

    I have had to remove and reinstall...
  12. Replies
    2
    Views
    238

    Re: MX-M7570 toner in tray 2

    If it is in the rear of the tray I would suggest it could have something to do with the toner waste system
  13. Re: How to calibrate drums of Sharp machines (MX-2640N)

    Go into the settings mode, choose the security settings, choose Initialize private data.

    This will take some time to run but all data in address book, document filing, etc will be removed.
  14. Thread: MXB201

    by spanky
    Replies
    4
    Views
    278

    Re: MXB201

    You can't print it out, sim 22-5 will display it.
  15. Thread: MX2640 U1-01

    by spanky
    Replies
    2
    Views
    330

    [Error Code] Re: MX2640 U1-01

    Battery (CR2032_PA)

    Sharp part # UBATL0021FCPZ

    I don't know if it will recharge
  16. Replies
    9
    Views
    754

    Re: MX3060 extended lan

    See sim 26-33 in the MX-6071 service manual
  17. Re: What is the dumbist customer comment/question you've heard?

    I had a customer copy from a color original to make a black and white copy.

    She later complained she had put the black and white copy in the document feeder and asked for a color copy and it came...
  18. Replies
    10
    Views
    715

    Re: Sharp MX-C301W Is it a reliable table top?

    The MX-C301W has been replaced with the MX-303W and MX-304W.

    You can no longer order the MX-301W.
  19. Replies
    7
    Views
    1,268

    Re: How well do you know paper?

    See attached chart
  20. Replies
    4
    Views
    771

    Re: scanning Office 365

    See attached
  21. Replies
    7
    Views
    410

    [Misc] Re: Sharp mx-2010u magenta problem

    swap drum units between the magenta and the cyan.

    Did the problem move with the drum?
  22. Thread: Sharp mx-m453u

    by spanky
    Replies
    53
    Views
    3,061

    [Error Code] Re: Sharp mx-m453u

    Are you using Sharp OEM toner or a third party toner?
  23. Thread: Sharp mx-m453u

    by spanky
    Replies
    53
    Views
    3,061

    [Error Code] Re: Sharp mx-m453u

    He has sent me a private message asking for firmware.

    I don't have a drop box to put it in and the file is too large to email.

    Can anyone help him with this.

    He is in Iran and I am not sure...
  24. Replies
    10
    Views
    741

    Re: MX-B350P MX-B450P AirPrint

    See MFP-TB-1885 for firmware update.

    It enables airprint.
  25. Replies
    5
    Views
    382

    [Misc] Re: Image position/placement problem on B402SC

    Replace the paper feed drive unit.

    Part #CFRM-1409FC32

    This includes all clutches in the transport, PS, and feed from tray #1.

    I have done several of these and it always fixes the issue you...
Results 1 to 25 of 393
Page 1 of 16 1 2 3 4