Search:

Type: Posts; User: fornerm

Page 1 of 2 1 2

Search: Search took 0.20 seconds.

  1. Replies
    11
    Views
    207

    Re: C308 intermittent noise

    I Know, its trankslate from google, mybe the false Word, but everbody know what i mean.
    mfg
  2. Replies
    11
    Views
    207

    Re: C308 intermittent noise

    Had the same thing on a C458, it is the bearing of the upper output roller in the door front.Should be a white camp.Cleaning or greasing.
  3. Thread: CLX-9201

    by fornerm
    Replies
    11
    Views
    4,109

    Re: CLX-9201

    Hello,
    I have these 3 files, who can tell me how to apply them?
    Thank you
  4. [Dead] Format HDD CLX-9251 9301 Handling Update Files ?

    Hello,
    Who can help ? It's about the formatting of a HDD in a CLX-9251.
    I have the ehd file and 3 different .tar.gz files, how and in which order
    they are to be turned on at the recovery screen...
  5. Replies
    14
    Views
    1,527

    [Misc] Re: Paper size/incorrect type

    There is a Info from KM About 8 1/2 x 11 Error, Maybe the Same at yours ?
    Ist a Cable Damage on the small 4 yellow Pin Plug Nr A161N10N01.
  6. Replies
    3
    Views
    1,851

    Re: 5501i jam codes 4101 and 4001

    Thanks Scottb I thought so too, have now replaced one in the clutch block,
    had only one there, the others cleaned, rust was not visible in the four,
    but they are pretty polished already on the...
  7. Replies
    12
    Views
    2,890

    Re: Clx-9201 stuck on boot screen

    Ever thought that there are several solutions to the error? For me it was my .....
  8. Replies
    3
    Views
    1,851

    Re: 5501i jam codes 4101 and 4001

    Hello,
    i have now the same. Machine with 248K, Any Solutions ?

    mfg
    Markus
  9. Replies
    12
    Views
    2,890

    Re: Clx-9201 stuck on boot screen

    Hello,
    i have the Same, the Failure is FW Version V6.P6.O3, the latest FW, this is the failure, you Flash with an older FW example V6.O6.09 to fix this.

    The FW you can download from HP,the...
  10. Re: 9301 CTD sensor cleaning message keeps comming back.

    Addendum, have now changed the CTD / ACR sensor Assy,
    and so far 3000 pages printed, until now ok, we'll see,
    earlier came the error so but the 1200 pages .....
  11. Replies
    4
    Views
    688

    Re: Windows 7 breaking scan-to-file

    https://news.konicaminolta.eu/resc/1/15060033868/0/transparent.gif
    Hi, ist German, but it helps….





    SMB Scan zu Windows 7 PC´s schlägt fehl mit einem „Weiterleitungsfehler“
  12. Re: 9301 ACR- CTD sensor cleaning message keeps comming back.

    So now I have gone further, it seems that the toner application of the test pattern only lands on the sensors at this point of the pattern.
    After changing ITB no change, the baffle plastic below...
  13. Re: 9301 CTD sensor cleaning message keeps comming back.

    Hello,
    have the same problem with a machine, has so far come up with a solution?
    Thanks + greetings
    Markus
  14. Replies
    4
    Views
    378

    Re: C284e grinding track itb and drums

    this is ok,
    when I replaced the itb it comes back in the drums also,
    perhaps also makes the other a broken,
    but I'd know where that came from before I use a new ITB and new drums again and then...
  15. Replies
    4
    Views
    378

    C284e grinding track itb and drums

    C284e
    Hello,
    who can assign this error?
    It forms with time a skid mark on the ITB and the 4 drum,
    this goes around, backside machines.
    Conclusion, stripes on the copy.
    I do not know where...
  16. Replies
    3
    Views
    829

    Update: Bizhub C220 low TCR Y-M-C C255x

    Hello,
    Thanks for your help, that sounds not bad, so the hopper box was emptied, he also notes that the toner is empty and wants toner,
    so Hopper and supply itself is OK, even the turns, it will...
  17. Replies
    3
    Views
    829

    Bizhub C220 low TCR Y-M-C C255x

    Hello,
    at a C220 comes after the change of developer units TCR low ( C255x ) and stands at 0.89% for all 3 Units in State Confirm. A dismantling of the old units did not change. Initial, manual add...
  18. Replies
    1
    Views
    268

    Re: Canon IR2270 Drum

    You ought to Function / DPC / D-Gamma execute in the service menu, but as a guide in the drum should be there.

    mfg
  19. Replies
    2
    Views
    448

    Konica 7228 + BK 114 activate ?

    Hello,
    how I can activate the auxiliary tray BK-114 on Konica 7228 with FS-114 ?

    thanks for help
  20. Re: C452 Paper entering FS526 finisher is buckling too much

    After me the crumpled paper but a little disturbed at the transition, here is my solution to the problem.
    Paper now has enough space, nothing crease. 're Running a few weeks.
    Simply an aluminum...
  21. Re: C452 Paper entering FS526 finisher is buckling too much

    ich have the same combination, and it works, but i have the curled Papier between the entrence and conveyance Unit, too. A3 is terrible, but works. And today i had the same Question and Konicaminolta...
  22. Replies
    1
    Views
    207

    Send to Mail Counter List IRC or IR

    Hello,
    I have in the IR (4570) and IRC (3580) the possibility to send me the counter by E-Mail? Scan to email is working. Thanks Markus
  23. Replies
    8
    Views
    1,104

    Re: Katun fixing film for the Canon IR4570?

    I have the film tested once with the result that the pressure was so blurred slightly blurred. Film had a shiny surface, perhaps what has changed since.
  24. Thread: error reset

    by fornerm
    Replies
    3
    Views
    13,085

    [Error Code] Re: error reset

    According to the service manual is a power supply failure.



    Hardware error.03130031-2618Turn off printer, wait,then turn on again.

    Check Power Supply
  25. Thread: C452 CQ

    by fornerm
    Replies
    11
    Views
    1,540

    [CQ] Re: C452 CQ

    Scan and post a test pattern, so we can see..........
Results 1 to 25 of 39
Page 1 of 2 1 2