Search:

Type: Posts; User: dsmith46

Page 1 of 4 1 2 3 4

Search: Search took 0.12 seconds; generated 39 minute(s) ago.

  1. Re: DSPF 2 to 2 lead edge is way off side 1 only

    Just do a Sim 50-28 for the SPF. This should take care of it. If it doesn't, I would be looking at a CID.
  2. Replies
    15
    Views
    1,480

    [CQ] Re: m607 background

    I have heard that the latest Firmware from HP addresses this exact issue. So, if you have some of these printers doing this, upgrade the FW to latest, and switch out the toner cartridge for a new...
  3. Replies
    5
    Views
    271

    Re: MX3640n - Error Codes F2-73 and F2-67

    I would try a brand new OEM Yellow toner cartridge. From what I understand from your post, the problem followed over to the replacement machine with the same toner cartridges that were in the...
  4. Replies
    5
    Views
    581

    [CQ] Re: MXM264 grey prints

    What are the counts on the machine? Are they using OEM or generic toner? You could possibly try increasing the laser power in Sim 61-3.
  5. Re: Skip blank pages when scanning - softswitch needed

    I would think Optimidoc has a blank page skip function, as most third party scanning software programs do. I would double check their settings, or have their IT look in to it.

    Good luck!
  6. Thread: sharp 5618

    by dsmith46
    Replies
    6
    Views
    899

    Re: sharp 5618

    "The ink"??? Are you a technician or an end user? You should probably leave the repairs up to someone who knows what they are doing.
  7. Thread: MX-M364

    by dsmith46
    Replies
    10
    Views
    2,776

    [CQ] Re: MX-M364

    You haven't mentioned if you have performed the 46-74 calibration yet. I would start there AFTER doing the 44-27, 44-2, 44-6, 44-26. Are they using genuine Sharp toner? On this series, I've seen IQ...
  8. Re: MX-M904 Finisher Jams in the Saddle Fold entrance area.

    What is the jam code? Sharp issued a bulletin about the saddle roller sensor causing false jams, and ultimately change the sensor and mounting plate that it mounts to. It is bulletin: MFP-TB-1149
  9. Re: * Asterisk button logout Sharp Models with the 10 key pad (MX-C301W, MXM453N, etc

    Maybe you can input a Program setting? I haven't done that for faxing, but you may be able to. The machines are capable of storing many Programs that retain specified settings. Just a thought.
  10. Re: Looking for sharp mx-2600n transfer belt#1 assembly

    Here ya go:

    Sharp MX-2600N 1st Transfer Belt Assembly, Genuine (M2406)
  11. Replies
    4
    Views
    441

    Re: MX6240 TB1 blade flip

    Sharp had issued a bulletin back in 15' about the primary belt blade flipping. I personally do not rebuild these units anymore. It is more cost efficient to just replace the whole unit with a new...
  12. Replies
    1
    Views
    345

    Re: MX4070-5070-6070 thumping from fuser

    These fusers are junk, IMO. I know our company has sent in SEVERAL complaints over the last couple of years to Sharp. I feel they refuse to address any issues related to the fuser itself. Instead...
  13. [Error Code] Re: HP LaserJet Enterprise 500 color MFP M575dn error 49.38.07

    Completely uncalled for. GTFO here.
  14. Re: Sharp MX-3050V machine takes a long time to bootup.

    Another +1 here. The new series of color Sharps require a very clean power source. Virtually all ground to neutral voltage needs to be eliminated. Make sure you are using a high quality surge...
  15. Replies
    9
    Views
    844

    Re: MX-6070N Copy Quality

    Unfortunately, from my experience with this series, the pics look normal to me. New DV, drums, mk kits should help fill them in a bit better. Make sure to do a full color calibration as well. Sharp...
  16. Replies
    11
    Views
    1,638

    Re: New sharp colors/ mx3070 / 3071 etc

    I haven't heard anything about Sharp adding web units to these fusers. It's a shame, really. The machine's aren't that bad, but the fusers just suck. I have very few that make it to a PM cycle, and I...
  17. Replies
    11
    Views
    1,433

    Re: mx-m565n Cleaning blade flip

    These felt pads go on BEFORE the blade is put in, just FYI. If you are putting them on TOP of the blade, you're doing it wrong.
  18. Replies
    11
    Views
    1,433

    Re: mx-m565n Cleaning blade flip

    The company I work for has pretty much abandoned the 560mk kits. Those cleaning blades are junk. Instead, we use the 503mk kits. The charger grid and saw tooth are the same, but you have to...
  19. Replies
    7
    Views
    1,004

    Re: MX-5070V - Air Print - User Control

    As far as I know, you cannot use Airprint when account control is turned on. Airprint doesn't allow for entering credentials. However, a work around I have found is using Sharpdesk mobile. It does...
  20. Replies
    5
    Views
    778

    Re: MX-5070v high pitch noise

    I have also seen where the Transport drive causes issues like this too. I just had a call today, where I am ordering a new drive. I have replaced this drive on several machines in this series. The...
  21. Replies
    12
    Views
    1,017

    Re: MX4141 squeaking from web unit.

    Try checking out TT-012916_2. It was a bulletin Sharp put out for the MX3140/3640 series color machines. But it deals with the same issues. When doing heavy amounts of toner coverage pages, the web...
  22. Replies
    9
    Views
    950

    Re: HP M451 Jam in tray 1

    I had an HP M452, which is a newer model, act the exact same way. Luckily I had another 452 that ran good, but with a bad fuser. I tried a NEW Tray 2 pickup assembly; no change. Swapped boards, no...
  23. Replies
    5
    Views
    1,110

    Re: MX-M264N SD card issue

    I would also do a complete backup of address book, and device cloning before replacing. This stuff is stored on the SD card if no HDD is installed.
  24. Replies
    8
    Views
    665

    Re: MX-7040 transfer cleaning blade flipping

    Take a look at bulletin TT-102016_1. It states which soft switches to set to add yellow toner in the 5050 through 6070 series machines. I'm not sure if the settings will be the same for the 7040, but...
  25. Replies
    25
    Views
    3,414

    [Jamming] Re: Sharp MX-4141N Phantom Paper Jam

    I would look at replacing the pickup, feed, sep rollers in the ADF. Usually if they are worn out or slipping on the paper, they will give that jam code, since the paper is not reaching the first...
Results 1 to 25 of 81
Page 1 of 4 1 2 3 4