Search:

Type: Posts; User: blackcat4866

Page 1 of 20 1 2 3 4

Search: Search took 0.76 seconds; generated 19 minute(s) ago.

  1. Replies
    5
    Views
    104

    [Misc] Re: eStudio 5540 rainbow

    I'm going to talk all the way around this problem ... hopefully arriving somewhere.

    It probably not a developing issue. The developing units last a minimum 1M prints, and the developer itself is...
  2. Replies
    3
    Views
    236

    Re: Head Management Sensor

    I've had maybe (6) machines that turned into the infinite money pit. And we'd get handy advice from Canon like: " ... yeah, replace all those boards a second time ... "

    Personally I try to advise...
  3. Replies
    3
    Views
    204

    Re: 4052ci Strange inner finisher issue.

    I'll have to look up the details tomorrow. I think it was a 4052ci with a bridge and external finisher, but similar symptoms.

    The precipitating event was their IT wiping all the PCs and letting...
  4. [Error Code] Re: Kyocera FS-2026MFP "Toner Cartridge Improperly Installed"

    If I remember correctly the left side sector gear operates the mechanism that engages the toner cartridges. If any of those gears becomes out of time or loses a tooth, you won't be able to insert the...
  5. Re: gear code for cleaning unit transtert belt 2551 ci?????

    Maybe you'll like it better in Italian:

    Copystar e Kyocera offrono entrambi solo assemblee. Non ci sono parti separate disponibili.
    =^..^=
  6. Re: gear code for cleaning unit transtert belt 2551 ci?????

    Copystar and Kyocera both only offer assemblies. =^..^=
  7. Replies
    20
    Views
    833

    Re: Bizhub C224 waste toner full

    I just want to clarify that you may be seeing the message "Waste Toner Box Installation Error". It's very common for endusers to need to snap off the flag on the waste bottle, so it is not identified...
  8. Replies
    3
    Views
    236

    Re: Head Management Sensor

    I haven't had success with cleaning. You'll have to replace. =^..^=
  9. Thread: MX2700N

    by blackcat4866
    Replies
    4
    Views
    703

    [CQ] Re: MX2700N

    Samples? =^..^=
  10. Replies
    8
    Views
    493

    Re: Kyocera Taskalfa 3051Ci

    It's split developer spacers. When the developing roller gets too close to the drum it arcs, sometimes damaging the drum. The new style units have the spacers from the higher speed units. Replacing...
  11. [Misc] Re: Kyocera Taskalfa 2551 back of the printed sheet is dirty

    Samples? =^..^=
  12. Replies
    7
    Views
    355

    Re: Sharp MX B402 /PRIMARY TRANSFER UNIT

    It's very common for the primary transfer rollers to drop out of the unit during shipping. So the thing to do is loosen up the belt enough to look inside and reposition any/all of the primary...
  13. Replies
    1
    Views
    120

    Re: hp pagewide xl 4000 service manual

    You're not going to be able to reset the PM counter without the manufacturer supplied service dongle. You can only get that dongle by attending a manufacturers 10 day class.

    Were it me I would try...
  14. Replies
    3
    Views
    221

    [CQ] Re: Offset copies

    Samples?

    Residual images of what? previous prints? registration marks? something else? is there an interval?
    =^..^=
  15. Replies
    4
    Views
    207

    [Error Code] Re: Olivetti 3002MF

    Is it a Matsuri? =^..^=
  16. Replies
    13
    Views
    1,087

    Re: Driving in the time of Covid 19

    Most US places, yes, right turn on red (unless marked otherwise). Some cities/states do not allow it. =^..^=
  17. Replies
    4
    Views
    207

    [Error Code] Re: Olivetti 3002MF

    I suspect this cross-references to a Kyocera ... do you know which? =^..^=
  18. Replies
    6
    Views
    327

    Re: HP PageWide Managed Color MFP E77650

    I've never been able to find an eject function. These are some of the most user unfriendly machines I've ever seen. =^..^=
  19. Replies
    13
    Views
    1,087

    Re: Driving in the time of Covid 19

    I've come to the conclusion that most drivers think that the traffic laws have been repealed. I must admit that driving in Flint, Michigan has been like this for the last 5 years. You have to treat...
  20. [Misc] Re: Replacing TA 4501 w/ 4501 Will U917 Work ?

    You'll be able to transfer quite a lot of the user data, but you'll find that the job accounting does not transfer, since there are color permissions required. My suggestion is to take each backup...
  21. Replies
    15
    Views
    1,798

    Re: bizhub C3350i with C40A6 erors

    I finally got an opportunity to follow up on this machine. The BaseB did not solve the issue.

    I don't understand what else it could be. The error is a communication error between the CPUB and the...
  22. Re: “Bug in the firmware” c360i C5620 / C9401 /J6608

    Thanks for sharing. =^..^=
  23. Replies
    1
    Views
    487

    Re: E-Studio 55,65 & 7506AC

    There have been some problems with the fusers blowing thermostats:
    ES 7516AC error C471

    Also, the front end of the developing augers get milled off by the E-clip, then slipping out the back of...
  24. Replies
    11
    Views
    831

    Re: taskalfa 3500i

    The feed units are a bit different ... not exchangeable. The higher speed models have an extra set of aligning rollers that can be an issue because of weak idler roller pressure. Those rollers do not...
  25. Replies
    1
    Views
    194

    bizhub 808, J32-05 only on duplex

    First time I've seen this:

    Simplex prints fine. When duplexing the first three first-sides pass fine, but the first second-side snags in the inverter gate.

    I'll skip the misadventures that led...
Results 1 to 25 of 499
Page 1 of 20 1 2 3 4