Search:

Type: Posts; User: travi

Page 1 of 5 1 2 3 4

Search: Search took 0.13 seconds.

  1. Re: At what age does Sharp stop supporting machines?

    I have been told by Sharp reps and in class that Sharp supports a machine 7 years after the date of last production. That was before the Foxconn take over. I have not seen anything published on...
  2. Replies
    13
    Views
    2,054

    [Error Code] Re: Sharp MX-2630 Error C1-14

    Swap each color drum unit separately with the Black drum unit. The code will change from C1-14 to C1-10 when the problem drum unit is installed as the black drum. You said that you are on an oil...
  3. Replies
    1
    Views
    487

    Re: Panasonic UF-7200 parts manual

    I was finally able to reach Panasonic. They sent me a copy. Thanks
  4. Replies
    1
    Views
    487

    Panasonic UF-7200 parts manual

    Does anyone have a parts manual for an UF-7200? I have the service manual and the parts manual is not available on Panasonic's partner portal.
    Thank You
  5. Replies
    2
    Views
    712

    Canon iR1730IF scanning to Network folder.

    Does a Canon iR1730IF support SMB 2 or 3? Does it support above TLS 1? I have a customer the turned off TLS 1 and lost scanning to network folders.
    Thanks
  6. Replies
    1
    Views
    686

    Xerox Workcentre 7242 Service Manual

    Does anyone have a service manual for a Xerox Workcentre 7242. I have a customer that picked one up from their sister company and would like me to service it. Thanks
  7. Re: Xerox Workcentre 7242 background and fuzzy output

    Since I don't have a service manual and normally don't work on Xerox. I don't have the life of the consumables. The total counts are 170773 black and white, 7823 color. All I have done is cleaned...
  8. Xerox Workcentre 7242 background and fuzzy output

    I have a customer that inherited a WorkCentre 7242. the black and white output has background and looks like it is out of focus. The edge that is near the rear of the machine only has backgound no...
  9. Replies
    3
    Views
    759

    Re: Extended Test Commands

    As far as Sharp USA is concerned they no longer exist. Japan has not released them to anyone.
  10. Replies
    4
    Views
    652

    [CQ] Re: mx-3070n color is blurry

    Take a look at MFP-TB-1549. It is for the MX4070 but works for this machine. There is a new tension spring I have had success with it.
  11. Epson Work Force WF-7610 service & Parts manual

    One of my Sharp copier customers has on of these in a small office. I need a service manual to fix it for them. It is printing a blurry line of black text about every inch and a quarter
    Thanks...
  12. Replies
    4
    Views
    1,241

    Re: MXM950 Error code E7-20

    Which harness LSU to PCU PWB or LSU to W-ICU PWB? Any common breaks in the harness? Did you install a new harness or repair the old one?
    Thanks
    Travis
  13. Replies
    4
    Views
    1,241

    MXM950 Error code E7-20

    I have replaced LSU, PCU PWB, DC Power supply, and W-ICU PWB. I have also updated the firmware. Any ideas on what I am missing.
    Thanks
    Travis
  14. Replies
    4
    Views
    787

    Re: Sharp AL-2080 drum

    Sorry for wrong number for the drum. I mistook the model for the FO-2080.
  15. Replies
    4
    Views
    787

    Re: Sharp AL-2080 drum

    We use an AR-152DR and cleaning blade to rebuild them. Be careful not to break the main charge unit. Use simulation to reset drum counter. Katun sells rebuild kits with instructions
  16. Replies
    2
    Views
    2,894

    Xerox Colorqube 8860 Error 91:720

    I am working on a Xerox Colorqube 8860 with Error 91:720. I know that this has to do with the print head tilt. I have checked the print head area for spilled ink, made sure the print head restraints...
  17. Replies
    4
    Views
    529

    Re: Sharp MX paper size in trays not detected

    Trays 1 and 2 of the MX3100 do NOT have auto size sensing. You have to manually set the paper size for them in the system settings. If there is a desk unit with a 500 sheet tray attached, Trays 3 &...
  18. Replies
    4
    Views
    2,869

    [Error Code] Re: Sharp AR M550 Error Code F2-37

    Yes. It is time to install a new drum.
  19. Replies
    5
    Views
    1,051

    Re: brother hl 1430 all light flashing

    Then you need a main board
  20. Replies
    5
    Views
    1,051

    Re: brother hl 1430 all light flashing

    Disconnect print data connection from printer. Turn off printer. Turn on printer. if it comes to a ready state print an internal test page. If test page prints you most likly have a corrupt print job...
  21. Replies
    0
    Views
    598

    Colorqube 8580 error 92.601

    I have a customer's machine that is intermittently giving this error code. They remove a misfeed and restart the machine. It works for awhile then gives the code again.
    I have updated the...
  22. Replies
    2
    Views
    2,951

    Xerox Workcentre 3655X Service Manual

    Does anyone have a Xerox Workcentre 3655X Service Manual? Or know where I can get one.
    Thanks
    Travis
  23. Replies
    6
    Views
    845

    Re: Toner chunks in Dv.

    We had a batch of toner with a production date of July 22 2014 tha cause this problem. We had 3 machines doe this all at once and it was right after the customer installed this batch of toner. We...
  24. Thread: SharpDesk

    by travi
    Replies
    8
    Views
    1,329

    [Error Code] Re: SharpDesk

    Yes, as long as the workstation can access the folder on the server.
  25. Re: Sharp MX series how to increase maintenance life

    This only works for Maintenance Total and Maintenance Color. There is not a choice for the individual items such as transfer, fuser, drum, or developer. Checked on MX-2610 and MXM314N
Results 1 to 25 of 116
Page 1 of 5 1 2 3 4