Search:

theres that little thing called google....

well what have you done to fix it?????

in the service manual :

 Debug logs are not saved in the following conditions:
 While erasing all memory
 While data encryption equipment is installed
 While changing the firmware...

have you already cleaned the areas the service manual says to clean?

i have tried what you did already... i have never had any success fixing that issue.

8675309......

i have never had to grease a ricoh fuser sleeve..

what parts have been replaced?

AMEN!!!

i did replace the part. tested and worked well while on site. guess i will know in a few days if it holds up as it should. i do believe it will.

you know what dns is, yet you dont know what static nor dhcp is.... highly recommended you call someone...

i logged into kda first. and still got the 404 error when clicking the link.

don't fax so many pages at once. or look into RAM upgrade.

i have used it. i wouldn't consider it user friendly for customers... if you have setup scanning before it is fairly straight forward. just to much going on, in my book, for a customer to setup. IT...

basically it means become a certified kyocera tech. and you can get all of the free firmware you wish. keep in mind someone paid good money for us kyocera techs to be trained. and you want something...

the xm3150 is more flush like you were saying, the actual keypad itself. the xm3250 is newer, and buttons stick up a bit more like on the 5263. was just wondering if anyone has tried it. the part is...

i am looking to replace the control panel display assy. 41x0051 on a xm3250. this assy includes the screen and the keypad/buttons. but i only need the buttons(which is separate from the screen). does...

clean ITB sensors?

use it for target practice.... buy a new printer.. its ancient.

ok it wont let me delete this post.......

i agree......we are a lexmark dealership and this is what we have to use now. i believe they removed the original site.

run away from these machines..... especially because the toner drum unit is one unit. and they don't work well for much of anything. just my thoughts.

have you tried rubber rejuvenator on the rollers?

due to the age of the machine i would greatly consider replacing it with a new copier. as opposed to spending money to fix it. from what i know some parts are no longer available.

i would drop the DPI before i tried anything else... from 600 to maybe 300. customer is pretty bored if they are actually timing the speed...