Search:

Type: Posts; User: mloudy

Page 1 of 14 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    7
    Views
    2,180

    Re: Sharp MX 3071 Error L4-18

    From what I see in the CR5 Parts Guide there are still only two motors on the main drive unit.
  2. Thread: Fax issue, VoIp

    by mloudy
    Replies
    8
    Views
    355

    Re: Fax issue, VoIp

    I am of now help with your issue BUT remember the days when faxing actually worked, like all day every day? The only fax service calls where when the fax line was dead. If you had a clean dial tone...
  3. Re: Analog Fax lines could start to go away in August 2022

    As I consider when we will be forced to make the switch I am thinking about a few things. Not fax related but phone related. We are still running 5 voice lines and 1 fax line. In this building for 25...
  4. Thread: SHARP MX-3070V

    by mloudy
    Replies
    7
    Views
    342

    [Error Code] Re: SHARP MX-3070V

    Found it.

    "Go to Storage backup. Choose User Register Information."

    Apply the backup file to the MX-3070V
  5. Thread: SHARP MX-3070V

    by mloudy
    Replies
    7
    Views
    342

    [Error Code] Re: SHARP MX-3070V

    Using the service web page clone another similar model and then apply the clone to this machine.

    There are instructions on here somewhere to restore the default password. It is a clone process too...
  6. Re: Analog Fax lines could start to go away in August 2022

    They first better figure our a way to get VOIP/FOIP lines to work without a buttload of static. Just about every vendor I use has switched to VOIP at some point in the past view years. Talking on the...
  7. Replies
    3
    Views
    213

    Re: interchangeable parts

    The buttons on a XM3250 have space between them and protrude from the control panel and from what I recall the buttons on a XM5263 are flush and have no space between them.

    If you are talking...
  8. Replies
    2
    Views
    209

    [Error Code] Re: A0-01 on MX-3570

    I would start with the PCU pwb and if you still get the A0-01 then replce the 8-pin eeprom.

    I think replacing the eeprom and retaining all the meters requires assistance from Sharp. I have been...
  9. Re: Checking firmware levels in web interface MX-7040

    Enter your email address in the Dealer E-mail Status Message List under E-mail Alert and Status, Status Messgae and click Send Now.

    The email that you get will have several .R0* files attached....
  10. Thread: XC6152

    by mloudy
    Replies
    2
    Views
    276

    Re: XC6152

    Update the firmware to CXTPP.076.308. Available at support.lexmark.com

    The do the following:
    Settings, Device, Maintenance, Configuration Menu, Toner Patch Sensor Setup, Full Calibration -> START...
  11. [Error Code] Re: Lexmark T652n Error 81 Routine Maintenance Replace Kit

    Did you actually replace the kit or just reset the counter?

    I am not familiar with this model but on some of the older Lexmark models the fuser had to be replace to get the maintenance message to...
  12. Re: Toshiba dealers - UK and Europe - Machine Stock

    I haven't googled it and I don't know what it is either.

    There was a song by that name that was catchy.
  13. Re: Toshiba dealers - UK and Europe - Machine Stock

    I do not have any real data from KM or Ricoh but I do from other OEMs and it isn't very good.

    We recently quoted a new customer a machine and we were up against two other OEM dealers. We got the...
  14. Re: Lexmark A4 devices and sending counter with email

    So far it has been free for us.

    Newer devices can be enrolled from the device web page and requesting a enrollment code. Sometimes this option isn't there but updating the firmware will add it. It...
  15. Re: XM 3250 multi sheet deeding from paper tray

    We have never experienced double feeding from the paper trays on any of the Lexmark models we sell which includes the XM3250. I would go with blackcats recommendation and give them a few reams of...
  16. Thread: Slot Machine

    by mloudy
    Replies
    6
    Views
    416

    Re: Slot Machine

    When I was a kid we had a nickel and dime slot. Had two arcade bowling alleys in the basement and pinball machines. This was 47 years ago. We moved and dad sold them all. My dad is 84 now and within...
  17. Replies
    5
    Views
    435

    Re: New machine delivery time?

    Two other OEMs have said don't expect any engines until Sept. or Oct. with the exception of a few models still left in stock. The continued complete lockdowns in areas of China where semiconductors...
  18. Replies
    7
    Views
    741

    Re: Lexmark XM3250 printing and copying slow

    I would test the machines by feeding from the MF tray to see if you get the same results.

    When feeding for the 550S tray you might want to watch the paper feed from the back of the machine to see...
  19. Thread: Fuel Surcharges

    by mloudy
    Replies
    2
    Views
    514

    Re: Fuel Surcharges

    I just got an interterritorial from a Sharp OEM branch with a locked 36 month cpp an no minimums. These are agreed upon cpp rates that we enrolled in with the OEM. The starting cpp is fixed in the...
  20. Re: Lexmark MS810 intermittent blue screen/firmware error

    You OR they..

    You might be able to update the firmware remotely if they will let you.
  21. Re: Lexmark MS810 intermittent blue screen/firmware error

    Likely showing a Firmware Error.

    Most of the time updating the firmware will fix it.

    Current is LW80.DNC.P210 released 1/16/2022. You are they can get it on support.lexmark.com
  22. Replies
    6
    Views
    439

    Re: Firmware Request MX-3061

    Yes it is a non-US model. Our version would be the MX-3051 or MX-3071 I think.
  23. Replies
    6
    Views
    439

    Re: Firmware Request MX-3061

    Is there really a MX-3061 in Cleveland or is there a Clevleand outside of Ohio, USA?

    Sharp USA has no MX-3061 firmware available that I can find.
  24. Thread: Sharp MXC300W

    by mloudy
    Replies
    8
    Views
    430

    Re: Sharp MXC300W

    This model came with PS stantard in the US. I would assume the same is true for the UK.

    I have never done scan to folder on this model to a MAC so I am of no help there.
  25. Thread: MX C304W

    by mloudy
    Replies
    2
    Views
    264

    Re: MX C304W

    $ YIKES!

    You could buy a complete used MX-C304W for just a little more.

    What exactly is wrong with the one now?
Results 1 to 25 of 349
Page 1 of 14 1 2 3 4