Search:

Type: Posts; User: GIUBOSS

Page 1 of 20 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    8
    Views
    496

    Re: Auto Code Generator Available for Free

    My workcentre 3655i does not accept more than 6 digits while the codes generator creates 8
  2. Replies
    6
    Views
    453

    Re: SC672-00 RICOH 04's IMC's

    I replaced a few months ago only the sata cable of the hd and updated all the firmware, I have not had more calls. Those for PC are fine
  3. Replies
    2
    Views
    143

    Re: Canon ir 2204 not entering service mood

    thread in the wrong place, here is KYO
  4. Replies
    2
    Views
    146

    Re: pro c5200 won't make calibration

    Is the test printed correctly? Have you already cleaned the entire optical drive?
  5. Replies
    8
    Views
    496

    Re: Auto Code Generator Available for Free

    really....
  6. WC 3655i ''all courtesy prints have been used ''

    Best wishes guys, a new consumer called xerox but they tell him that the box is from another owner and they don't give the activation code, can you help me, S/N. 3353466797 thanks
  7. Replies
    7
    Views
    838

    [Misc] Re: Kyocera DC 2328 writing "please wait"

    Greetings. Thanks for being here but I think you will have to start a new thread but in another section of the forum
  8. Replies
    2
    Views
    150

    [Jamming] Re: Ricoh Aficio spc811dn

    Check the magnet that drives the take-off roller if it comes back to rest, you may have the torque limiter that is damaged (rarely), replace the 3 rubber rollers, also check the back of the duplex....
  9. Replies
    8
    Views
    496

    Re: Auto Code Generator Available for Free

    Sorry but I don't see the utility or link regarding tech support and code generator.
  10. Replies
    10
    Views
    565

    Re: Email Settings Ricoh C5503

    logging in both from WIM and as administrator from user tools, email settings
  11. Re: I need Service Manual 2506ci, 3206ci, 4006ci, 5006ci, 6006ci

    You entered the thread in the wrong section ..
    You entered the thread in the wrong section ..
    You entered the thread in the wrong section ..
    You entered the thread in the wrong section ..

    try...
  12. Replies
    1
    Views
    230

    Re: Ricoh mpc3003 , icon.

    Such a concise and banal request for help follows such poor participation.
  13. Replies
    4
    Views
    378

    Re: Ricoh mpc3003 , printing problem.

    Check the settings shown in the certificate (if you find it), check the spacers of the drawers, clean all the rubber rollers in all the sections where the paper flow, check the technical manual ...
  14. Replies
    1
    Views
    108

    Re: Samsung M2020 paper feed

    Remove the toner cartridge / drum and check inside the printer, you should notice white supports at the rubber rollers, sometimes they are taken away to release the jammed paper, you have noticed if...
  15. Re: Lanier LD 620C - Scanner White-ish Images - No Hardware Errors

    Cleaning all the optics was the first thing to do ... then down with the user mode copy calibration.
  16. [Misc] Re: Elatec TWN3 special Toshiba driver for Windows

    Elatec TWN3 Card Readers for Toshiba MFP devices | PaperCut
  17. Replies
    309
    Views
    35,521

    Re: Anti-vaccine ridiculousness

    Just my testimony.
    My son is 10 years old, without vaccine, a week ago he took covid and after 3 days he had no more symptoms (fever at 39, headache, cold), he reacted well, now he has only a little...
  18. Replies
    2
    Views
    187

    Re: Cannon DR-G1100 noise need manual

    Found this, check it out and ask in Canon tomorrow for the service manual.
  19. Replies
    3
    Views
    330

    Re: Lexmark xs798de

    For the new one I saw on PrecisionRoller you will find everything except the drums ..., with the used one I would look for it on ebay, obviously the machine is new (without spacers or pins) but if it...
  20. Re: Confusing customers purchasing machines by resetting consumable life?

    In my opinion, only technicians with some experience can accurately examine the condition of the machine and the various parts subject to wear. If you do not know the history of replacements or you...
  21. Replies
    4
    Views
    321

    Re: Xerox Work Center 7835 developer yield?

    If you mean the number of pages about 250k
  22. Re: Нужна прошивка konica minolta C308

    Hi, if you write in English you have a better chance of success in your requests
  23. Re: Samsung SCX-4300 scanning but not printing ny

    Try the specific driver here: Samsung SCX-4300 Driver Download for Windows
  24. Replies
    1
    Views
    263

    Re: Ricoh Parts required in UK

    However, you can contact Ricoh technicians in the UK in the section:
    https://www.copytechnet.com/forums/ricoh-savin-gestetner-lanier/
  25. Replies
    5
    Views
    371

    Re: Xerox 700 Recurring tray error

    I would not want to discourage you but if you are not a qualified Xerox technician it would be better to avoid putting your hands in it self-taught, check the condition of the rubber rollers and in...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4