Search:

I have just created a file for you to try.

Unzip this & Pop on the root of your USB pen.

53784

Before replacing any boards etc did you try updating the system software?

I would print off a PM report to see what parts are over life. You may be lucky & the machine has had the black PCU replaced if not most likely that will be the next item you'll need to replace.
...

You load the firmware onto a USB pen drive. You don't need to enter CE mode to update.

There is a also a SSD update you could try that first before ordering a new SSD board.

hello mastercosot of the firmware canon c7570i and c5560i??[/QUOTE]

We are happy to help.

Printer & Copier Firmware - www.printerfirmware.co.uk

Do it doesn't update all the firmware modules, some are not included in the package, font & PCL being two for example.

Did you update ALL firmware not just the package?

The way we troubleshoot the SC672 error is pretty simple.

Try & firmware update via SD card if this fails & the machine throws the SC672 you will need to replace the controller.

If however the...

This is normal. Basically printing from USB is very limited you can only use the fonts installed on the copier.

Printing from a PC will use the driver setting & fonts etc.

You could try...

Yes we are happy to supply you the latest firmware.

Feel free to drop us an email.

Printer & Copier Firmware - www.printerfirmware.co.uk

The best & safest way to update the firmware is VIA the SD card method. The tool is very unreliable on many models & some users have ended up needing to replace the controller board after using the...

Update the system software.

If you have white lines you could try cleaning the laser units. Remove the copy tray (1 screw) & they are sitting above the PCDU.

If after cleaning the lasers you still have the white lines...

You’ll find its easier & safer to update the old way via SD card.

You can also update the apps too which you can’t with the tool.

We're happy to help.

Printer & Copier Firmware - www.printerfirmware.co.uk

We're happy to supply the firmware to resolve this issue.

Printer & Copier Firmware - www.printerfirmware.co.uk

Happy we were able to assist.

Printer & Copier Firmware - www.printerfirmware.co.uk

Dude this document has your clients mobile number, email & site address. I would take this down ASAP & use another document!.

Maybe check the firmware is the latest or at least the same version as the devices you have in the UK.

It is not possible to 'change' the total counts the only way is to fit a new NVRam but this will reset them to zero.

You can however change the counter to display the development counts, maybe...

Why would he want to do an 'all clear' just because his client turned on the banner page option!?

Does this only happen to only number ? Maybe try sending to another fax enabled device ?

If it jams every time check each sensor using input/output check in SP mode. Check each sensor changes from 1 to 0 when you put your finger over it etc this will identify which sensor has failed, or...

We can supply this for you, Drop us an email.

Printer & Copier Firmware - www.printerfirmware.co.uk

We can help should you still require the Pro 8210s firmware.

Printer & Copier Firmware - www.printerfirmware.co.uk