I would check your plugs on both ends check for seating or damage to the flat ribbon cable. Order a display if you have too, but I would change the ribbon cable with the repair.
If you have a used...
Type: Posts; User: 40yearsplus
I would check your plugs on both ends check for seating or damage to the flat ribbon cable. Order a display if you have too, but I would change the ribbon cable with the repair.
If you have a used...
Late response but for others there are green slides on the side of the fuser. They want the unit set to paper for copying paper and the other way is to set it for fusing envelopes The unit will ask...
i-Option LK-105 on a KM C552
Found another thread on the topic. If anything in here helps, its a different model number but prob same info.
Have you just moved the Memory to see if it works in...
Bumping my thread once. Thanks
Hello,
I need 2 or more Xerox Vera Link B405 Bias Transfer Roller transfer Clips but looking through Parts manual can find no Part number.
Am attaching a picture, if anyone can help or get for...
Is there any image inside the folded are, hard to see with the picture. But if no image in that fold then it looks like the registration roller may be stalling a moment and the paper folds on...
Remember your ITB cleaning unit also make sure its not clogged or waste toner full.
Just some Ideas.
You stated you stopped the paper and saw the spots on the drum, so im guessing this was before the cleaning of the drum. You said you swapped a Drum and it stayed the same for...
Bumping thread. Thank You.
I had a few from the drum charge roller that sits internally built into the Drum unit. The charge roller gets a fine line worn in it and you have to look hard and you will probably see it on the...
Think you helped answer the question with the two different part numbers. You probably know from working on Canon if its the last three digits you would probably be fine. Any others it is different....
Sounds like an original problem. Although your heat could be depleting in large runs. Check the type of paper the customer is using and make sure the unit is set to that type paper.
See if you can...
Ricoh Units passing copies fine and all functions work.
5055 Meter 66539
6055 Meter 329678
5055 Meter 139611
501 Meter 118356
501 Meter 143958
IM 350F
Picture of units can be...
I see their website it says they manage over 15,000 certified technicians.
But I guess those are sub contracted and they may be acting like they are Managing you.
In the past I needed some...
Hi can you help me with the Part number we call a company that buys from KM Minolta and they said they do not see the Part available. I did not see it in the Parts manual either. Im looking at the...
No to be short.
I recently had a KM C284e that I found the SSD card was bad on and took one off an old unit I had in the shop, although the last copier company who owned it has a password set to access Service mode...
Sorry I already had responded bet you have it fixed !!!
You can also change the dialing method on those Konicas but that would only be tried if you can not dial out period.
Print your transaction reports and see what is happening, there should be codes and notations.
I know on Xerox there are.
Also someone on the other end could be hitting stop if they don't...
If no one mentioned it print out your communications report some machines give the error codes.
Its no the board, its the line provider or the machine on the other end. Some cheap faxes also run...
Here is a prior post on this site, it is an exit sensor stationary jam.
The Author mentions HP by accident but all the numbers show its a Canon, maybe not exactly your model.
There is...
Swap out the HDD with the one that works on the identical model you have in the shop.
Then turn it on and see what happens should work.
GL
I have had a few but not that model run out of toner but not notify. You can spin the set up toner over a trash barrel but there are a couple spots to flip first.
If its set up toner you may be...