Search:

Type: Posts; User: bigdaddyooo

Page 1 of 2 1 2

Search: Search took 0.19 seconds.

  1. Replies
    2
    Views
    353

    Re: MX-C304w problems

    It is the latest fw. Feb 4th i think
  2. Replies
    8
    Views
    584

    Re: Interesting find: Msata cards

    Like I said Bill, it was just an observation. That was the first time. I tried it on a card that was giving me E7 80s and 90s. It is been 3 days plus and the machine has not had an ever since that so...
  3. Replies
    8
    Views
    584

    Re: UPDATE Re: Interesting find: Msata cards

    On the MFC PWB there's a switch up on the top. It says update turn that on then power up the machine. You'll see six blocks on the control panel. Make sure you have USB stick in. You tell it to...
  4. Replies
    8
    Views
    584

    UPDATE Re: Interesting find: Msata cards

    Been 3 days now and NO errors. I say it's a go to CN update a bad Msata.
  5. Replies
    2
    Views
    353

    MX-C304w problems

    we have just placed about 30 of these in the field and have had a few issues. Thumping from the fuser...blank LCD screens...waste toner full messeges. Are these the Canon NP2015 of Sharp? Us older...
  6. Replies
    8
    Views
    584

    UPDATE Re: Interesting find: Msata cards

    Machine has been running since yesterday and has NOT had an error. I had 2 errors before I CN updated the firmware.
  7. Replies
    8
    Views
    584

    Interesting find: Msata cards

    Had a 3550 throwing E7-80's and 90's. I swapped the Msata card out with one from a functioning machine. Now that machine is running great and the problem is now with my shop copier who's Msata I...
  8. Re: Pro 200 M251nw close rear door cycling with initialization

    So I ended up replacing the DC controller. Problem resolved. thank you to all who helped.
  9. Pro 200 M251nw close rear door cycling with initialization

    I had a 251 come in where the machine will do it's initial rotation then go into an open rear door. Then, without doing anything it will recycle and do this for hundreds of times if you let it. It...
  10. Replies
    9
    Views
    1,060

    Re: MXM623 paper behind transfer unit.

    This machine has 1 transfer unit. The color machines have a primary and secondary.
  11. Replies
    9
    Views
    1,060

    MXM623 paper behind transfer unit.

    .Have replaced fuser, fuser drive unit and delivery unit. Jams most of the time. Shut off sensors then had a huge lead edge and trial edge was on back of page. Bizarre. Any ideas?
  12. Replies
    2
    Views
    856

    Re: sharp MX-3570N

    1st thing is to make sure the TC1 belt drive gear screw is tight and the gear is not wallowed out. 2nd is make sure the DV is still workable. If the DV is weak you will get errors when doing a 50-22....
  13. Replies
    5
    Views
    677

    Re: Printing slow from computer

    1st thing I check is the job log. if it's more than 50k or what ever it's set at...you get slow printing. Delete the job log and VIOLA...fast printing.
  14. Replies
    0
    Views
    104

    OJ Pro 8740 encoder

    I have the encoder strip and the leaf spring for the right hand side. What goes on the left hand side to secure the encoder. I cant find a spring or fastener dropped in the machine. Customer brought...
  15. Replies
    1
    Views
    333

    MX4070-5070-6070 thumping from fuser

    We have 4 or 5 of these machines making a thumping noise from the fuser area. We found the resin bushings on the belt roller are very loose and making the noise. We sent a video to our rep for...
  16. Replies
    20
    Views
    3,547

    Re: Motors MX-4070

    Whats been happening is the DV units are filling up because of a design deficiency. There is a bulletin about it. So now the units will hold more without clogging the tube. CCE2027r is the TT.
  17. Replies
    11
    Views
    1,370

    Re: mx-m565n Cleaning blade flip

    Mike2565 is absolutely correct. Put the seals on AFTER you put the blade in. Just butt up the seal to the blade. I flipped a blade 3 times in same machine before doing it this way. ZERO since.
  18. Re: Sharp MX-5001N slow printing on larg files (8mb +)

    Check the job log. Printing slows tremendously when you reach the 50K plateau. Just delete the job log and VIOLA...fast printing again.
  19. Replies
    4
    Views
    406

    Re: 2310-3110 faint 22-6's and 50-10s

    It was one of the 1st things I checked. Just seems this series does that..light 22-6's and 50-10's. Copies and prints are great
  20. Replies
    4
    Views
    406

    Re: 2310-3110 faint 22-6's and 50-10s

    1) of course
    2) 500k on black 80k on color
    3) yes always.
    4) Just rebuilt it myself. 4 oem drums and mk's. Im a 30 yr experienced tech that has done hundreds of PM's
    5) seems all of these series...
  21. Replies
    4
    Views
    406

    2310-3110 faint 22-6's and 50-10s

    Anyone have a theory as to why on these machines that the 22-6 looks faint compared to other models? 50-10s are very light but copies and prints look good. Im stumped. Just want to see of anyone else...
  22. Replies
    7
    Views
    455

    Re: c3503 portrait registration

    Well ty Mr. Helper. ok so... LEF is off on all ports.43099 SEF is fine on all ports. here is a pic to show you.
  23. Replies
    7
    Views
    455

    c3503 portrait registration

    any port in the portrait orientation, the side to side reg is off. tried 1001-002 no good. THE COPIED IMAGE IS SHIFTED TOWARDS THE LEFT SIDE OF PAGE. landscaped seems to be fine in bypass and tray 2....
  24. Replies
    5
    Views
    955

    [Jamming] Re: MX-M753N POD_N1

    The only dog earring I've seen is when the exit guide ribs on the fuser cake up with toner causing jamming and dog ears. Just clean off the ribs and problem should be resolved.
  25. Replies
    0
    Views
    551

    MX365 series FYI

    Had a machine yesterday when I opened the right side door, there was a line of toner on far end of drum and transfer roller. It was time for a new drum and MK so I replace them. Same thing...a line...
Results 1 to 25 of 32
Page 1 of 2 1 2