Search:

Type: Posts; User: Kenny

Page 1 of 7 1 2 3 4

Search: Search took 0.19 seconds.

  1. Thread: Sharp MX2614

    by Kenny
    Replies
    5
    Views
    237

    Re: Sharp MX2614

    Yes its moves freely by hand, it 'jutters' when I turn the machine on. Spoken to another Tech, he said it could be anything power related as the machines control panel not booting up.
  2. Thread: Sharp MX2614

    by Kenny
    Replies
    5
    Views
    237

    Re: Sharp MX2614

    Yes I have replaced that board, I forgot to mention the screen does not boot up when I turn the machine on so I can not see if there is any codes.
  3. Thread: Sharp MX2614

    by Kenny
    Replies
    5
    Views
    237

    Sharp MX2614

    Hi guys,

    I'm currently working on a Sharp MX-2614 which has a lamp issue.

    The lamp is trying to drive but it 'jutters' and it doesn't illuminate, it moves an inch,stops then moves an inch again...
  4. Replies
    12
    Views
    1,073

    Re: Konica Minolta C754 - Fiery issue (IC-414)

    Raplma... thank you 🤣 changed it to print on both sides and itís worked thank you for your help! And everyone else, itís very much appreciated!
  5. Replies
    2
    Views
    256

    Re: Konica Minolta C454 - status notification

    Thank you!! :)
  6. Replies
    3
    Views
    427

    C3350 - Screen issue

    Hi guys,

    Does has any one had any issues with the Konica Minolta C3350 screens. We have had three come in and some of the screen is un-responsive?

    any one have any ideas to get the screen...
  7. Replies
    2
    Views
    256

    Konica Minolta C454 - status notification

    Hi Guys,

    Just wondering if anyone knows on here, we have set up status notifications on one of our customers machines to let us know when to supply them with toner. Is there a way to increase the...
  8. Replies
    12
    Views
    1,073

    Re: Konica Minolta C754 - Fiery issue (IC-414)

    Hi Guys,

    I have managed to narrow it down to the Impose setting on the fiery driver through command workstation.

    I got this to work by trying the impose software demo

    the required settings...
  9. Replies
    12
    Views
    1,073

    Konica Minolta C754 - Fiery issue (IC-414)

    Hi guys,

    We currently have a customer trying to print A3 booklets center staple and fold through a IC-414 Fiery (command workstation). Is anyone aware of the settings that are required for this to...
  10. Replies
    6
    Views
    778

    Re: Konica Minolta C652 - black toner issue

    Thanks for the reply,

    The machine does say it has ran out of toner and is empty when we first came to this issue, then we replace it but like I say it goes back to low toner after a day:confused:...
  11. Replies
    6
    Views
    778

    Konica Minolta C652 - black toner issue

    Hi guys,

    We seem to having an issue with one of our C652s. The black toner level on this machine always says it is low and then says replace toner. We have replaced the toner multiple times, we...
  12. Replies
    26
    Views
    1,146

    Re: C364e - MFP firmware update N.G

    Guys,

    Just a quick update. The machine now FINALLY works!!!!! after replacing the SSDB the machine finally has taken firmware and all is good:D

    I appreciate all the help!!
  13. Replies
    26
    Views
    1,146

    Re: C364e - MFP firmware update N.G

    Yeah that's what i have tried this morning, but machine still doesn't accept firmware
  14. Replies
    26
    Views
    1,146

    Re: C364e - MFP firmware update N.G

    Dont suppose anybody has the replacement procedure for an SSDB????

    Tried other bits but not worked, going to have to replace SSDB:(
  15. Replies
    26
    Views
    1,146

    Re: C364e - MFP firmware update N.G

    I have performed this and everything says its 'OK' :confused: trying a few other bits before replacing SSDB
  16. Replies
    26
    Views
    1,146

    Re: C364e - MFP firmware update N.G

    We have ordered an SSDB just in case, I will give your suggestions a try! will give an update tomorrow.

    thank you all for your help!!:D
  17. Replies
    26
    Views
    1,146

    Re: C364e - MFP firmware update N.G

    The firmware hasn't sorted the issue :( its just download N.G. all the time, i then try the firmware reset which gets rid of the error invalid external device. but as soon as you try to print...
  18. Replies
    26
    Views
    1,146

    Re: C364e - MFP firmware update N.G

    Actually i have managed to find it. Ill give that a go now and will let you guys know how i get on!

    Please work!!
  19. Replies
    26
    Views
    1,146

    Re: C364e - MFP firmware update N.G

    I don't suppose you have G20-M1 firmware on hand do you? cannot seem to find that firmware:confused::confused:
  20. Replies
    26
    Views
    1,146

    Re: C364e - MFP firmware update N.G

    Did not know the GDL-M1 firmware was a special firmware?

    its just the firmware that said it was the latest on the konica website.
  21. Replies
    26
    Views
    1,146

    Re: C364e - MFP firmware update N.G

    Right guys I am currently on site, I have disconnected everything and tried to update firmware but still no avail. Would that mean the SSDB has gone bad?
  22. Replies
    26
    Views
    1,146

    Re: C364e - MFP firmware update N.G

    I am trying to update it to the latest one GDL-M1 and I will give that a go. Fingers crossed it works!!
  23. Replies
    26
    Views
    1,146

    Re: C364e - MFP firmware update N.G

    I have tried that unfortunately, the machines being abit of a nightmare haha 🤣
  24. Replies
    26
    Views
    1,146

    Re: C364e - MFP firmware update N.G

    The machine was getting 99-01 jams and saying select the correct paper in paper tray so I wanted to update firmware before anything
  25. Replies
    26
    Views
    1,146

    Re: C364e - MFP firmware update N.G

    Yes I have tried selecting that on its on own but no avail
Results 1 to 25 of 160
Page 1 of 7 1 2 3 4