Search:

Type: Posts; User: anothertech

Page 1 of 20 1 2 3 4

Search: Search took 0.29 seconds.

  1. Replies
    26
    Views
    460

    [Error Code] Re: MP C3502 SC554 problem

    I would bet he has not used a fuse, it's not too hard to do, I have had to use one many times and have never had a problem. I'd send him some if he was in the US, I wonder what the shipping would be...
  2. Re: MP C2500 faded black prints (CMY are OK) - replace drum?

    I think removing the shutter on a machine is kept on the QT, it's like a taboo thing, techs do it but they don't talk about it.
  3. Replies
    22
    Views
    773

    Re: Finding previous tech SP access code

    Who carries an EEPROM reader? I've never even seen one.
  4. Replies
    14
    Views
    1,012

    Re: "OCR detection Processing"

    First press reset, then set the resolution to 300, then press the program button, select program as defaults, then answer yes, then press program.
  5. Replies
    6
    Views
    574

    Re: MP2555 fusing issue

    When you say the tech replace all the fusing parts, I'd be interested to know what parts were replaced, maybe not everything in the fuser was replaced.
  6. Replies
    14
    Views
    1,012

    Re: "OCR detection Processing"

    You have two machines working and one giving a problem, use that information to help troubleshoot. First clean the optics on the problem machine. Now go compare the firmware versions and compare the...
  7. Re: MP 2555 enable print from memory device

    Nice, you removed the post, then you posted a link to it, why would someone do that?
  8. Re: MP 2555 enable print from memory device

    Could you edit this post to remove the service mode access information please?
  9. Replies
    34
    Views
    1,547

    Re: helpme,to reset password Ricoh Mp c2550

    Proszę nie pisać po niemiecku. to jest angielskie forum, dziękuję za ZROZUMIENIE. Wykorzystałem to, aby lepiej słyszeć.;)
  10. Replies
    34
    Views
    1,547

    Re: helpme,to reset password Ricoh Mp c2550

    If anyone needs to give green cards so that you can give red cards, I will fall on the sword for you, go ahead and green card me. :rolleyes:
  11. Replies
    22
    Views
    1,686

    Re: MP301 PCU's failing constantly

    I kinda like both models, the MP401's run good with the new style drum units and the new firmware loaded. The MP301's run good and are easy to work on. It's just the latest batch of drum units are...
  12. Replies
    5
    Views
    321

    Re: Ricoh MPC6003 SC 370-03

    After you blow off the sensors with air, wipe them with some glass cleaner or Rain-X. Sometimes they get static buildup and collect toner.
  13. Re: RICOH MPC3503 Magenta drum/developer problem

    Yeah that's the truth, Magenta seems to fail a lot. I'm sure there's a good reason for that, one we will never know.
  14. Replies
    11
    Views
    484

    Re: mp c4503 blown fuse fu102

    A good surge suppressor might have prevented that problem.
  15. Replies
    11
    Views
    484

    Re: mp c4503 blown fuse fu102

    Now that's a quote:D
    Hahahaha.
  16. Replies
    16
    Views
    909

    Re: 3503z scanning issue

    If your op panel firmware is out of date, it could be why you don't see the SMB settings on the panel, try looking for them in WIM.
  17. Replies
    16
    Views
    909

    Re: 3503z scanning issue

    I am not familiar to the z model, does it use the same firmware? Where do you find information on the z model?

    Is the machine on the same subnet as the other three machines?

    Can you ping the...
  18. Replies
    22
    Views
    1,686

    Re: MP301 PCU's failing constantly

    We have been having a lot of D1272110 PCU's failing at around 20,000 copies. Quite a few are locking up with SC500 displayed. No cure in sight.
  19. Replies
    7
    Views
    455

    Re: sc 670-04 on a mpc300

    I've had luck asking the customer what color toner was changed last and then replacing that toner again.

    If you're Rebooting when replacing toner, it will be faster to reboot if you turn off Java,...
  20. Replies
    5
    Views
    541

    [Error Code] Re: Ricoh mp 6002

    I found this on another site, good luck.

    "We replaced the black plastic "bracket" pn B065-1137 which houses the drum shaft support bearing which provides grounding. We believe the dielectric...
  21. Replies
    12
    Views
    538

    [Misc] Re: Ricoh MP C5502 Display Language

    When you put it that way, I guess I'd go for the Ricoh too.
  22. Re: Ricoh MP 7502 light copy and print quality

    Winner Winner chicken diner!!!!
  23. Replies
    12
    Views
    538

    [Misc] Re: Ricoh MP C5502 Display Language

    Lol, now that is funny.

    Seems you have two choices, 1 buy a Ricoh on the cheap with absolutely no support, or 2 pay a little more and buy a different brand that has tech support. Your call sir.
  24. Replies
    12
    Views
    538

    [Misc] Re: Ricoh MP C5502 Display Language

    Are there any techs that work on any other brands servicing the area? I would purchase an MFP brand that had local support techs.
  25. Replies
    279
    Views
    357,227

    Poll: Re: How Long Servicing Office Equipment

    I stated doing this in 1984 and yes, this job has changed a lot. Everything changes, you have just got to change and adapt to the new normal. I like the job because I like helping people. When we...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4