Search:

Type: Posts; User: femaster

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    6
    Views
    227

    [Misc] Re: KM Documentaion USB Drive

    I 100% agree, it's not like the information isn't available for download already. I was just wondering if there was some sort of structure or additional software involved that might make it easier...
  2. Replies
    6
    Views
    227

    [Misc] KM Documentaion USB Drive

    Curious if any techs in here have ever purchased and/or used the KM Documentation USB Drive they sell. I'm only asking as they seem to charge a small fortune for it, and was wondering if there is any...
  3. Replies
    11
    Views
    627

    Re: Finisher disappeared

    I'm not the OP, but the 4 times we've had this happen on this model finisher, every time was a bad board in the finisher. Nothing looked fried, and the fuse was still intact on all of them, so no...
  4. Re: Strange prints think developer might be empty

    If the cyan drum is near or beyond life, replace that at the same time as the dev unit, or you may drain your new unit. Has happened to me a couple times when I was in a hurry and forgot to check the...
  5. Re: Original left on glass or detecting A4 with no paper C368

    I didn't see it mentioned previously, but have you tried adjusting the height of the ADF? If the white platen sheet is too close to the glass, it will sometimes be detected as a piece of paper on the...
  6. Replies
    21
    Views
    7,603

    Re: Bizhub C258 color and Bw drum unit

    The differences aren't visible in your picture. If you are trying to use a black drum in place of a color drum, then the black end piece needs to be swapped between the new black drum and the old...
  7. Thread: bizhub c350

    by femaster
    Replies
    2
    Views
    210

    Re: bizhub c350

    Are you sure it starts with a "C"? I can't access manuals for machines that old, but "B" codes (as in a "B002") are fax errors.

    None of this may apply to your situation at all if the code really...
  8. Replies
    5
    Views
    333

    Re: bizhub C360 upper latch

    I believe what you are looking for is #7 in the images below. Why it is found in the PH Unit section is beyond me...

    48972 48973
  9. Thread: C658 finisher

    by femaster
    Replies
    14
    Views
    809

    Re: C658 finisher

    I see in the post you linked to that the belt jumped off. I just had to fix one of these late last week. My first experience with that issue thankfully. Machine wasn't in a dirty environment, and was...
  10. [Dead] Re: need help Bizhub C550 shows lights when turned on but display is blank

    If I remember correctly, on this model, you could get this symptom if one of the memory (RAM) sticks went bad. There should be 2 mounted to the board, swap them around. If the copier then boots up...
  11. Re: Bizhub 4 series no matching paper size when printing a mortgage package

    The question everyone was answering was posted almost a 1.5 years ago. I'm guessing they must have either figured it out or given up on it by now.
  12. Re: Konica Minolta bizhub C258 image quality problem

    While I've not experienced this on an Cxx8 series yet, the dots you are seeing on the after sample look exactly like the dots I've seen on a few C552's when the ITB is used well beyond it's life....
  13. Replies
    17
    Views
    830

    [Jamming] Re: Bizhub 25e keeps jamming documents

    Have you cleaned the pickup and feed tires with anything? These small models are terrible for jamming when the tires start to get dirty.
  14. Replies
    15
    Views
    671

    Re: Bizhub only scanning to TIFF

    The info in the KB you have indicated is correct:
    1. Press the Utility/Counter button.
    2. Select Check Details.
    3. Enter the Service Mode.
    4. Enter the Service passcode and press End.
    5. Etc......
  15. Replies
    15
    Views
    671

    Re: Bizhub only scanning to TIFF

    Nope. See my comment right above yours...
  16. Replies
    15
    Views
    671

    Re: Bizhub only scanning to TIFF

    He's talking a Bizhub 200 here, no such menus or settings existed for at least another 2 to 3 years after the 200 was produced....
  17. Replies
    7
    Views
    351

    Re: 250 transfer roller in 223

    We've never bothered to remove any of the plastic sheets (spacers), just left them as they were. I wouldn't worry about doing that in the future.
  18. Replies
    7
    Views
    351

    Re: 250 transfer roller in 223

    They will work in either or, and can be swapped. The only difference between them is one has a black stick on plastic layer over the metal part and the other doesn't, but we have never had a problem...
  19. Re: Bizhub c224e problem "Serial number must be entered" -> "TPM Chip has been change

    Did you follow the procedure properly? It almost sounds like you may have, but I'm not sure by your original post. Just in case, make sure you are following these steps:

    Boot copier to the reset...
  20. Replies
    15
    Views
    668

    Re: Konica Minolta C287i prints random text

    Could be either one of the 2 suggestions so far, wrong driver, or public IP. I've had experience with both situations, unfortunately. Unless there are employees in the office at night or there is...
  21. Replies
    23
    Views
    1,568

    Re: Can't start firmware update in c258

    Yes, definitely something I tend to do as well. Nothing like attempting to get in and just as you are entering the pass code, someone sends a job and locks you out. :mad:
  22. Replies
    21
    Views
    1,091

    Re: Bizhub C368 / C558 Firmware the same?

    These aren't my guidlines, I just follow what the "boss" tells me to do. Frankly, I don't think he has a clue a lot of the time, but don't tell him I said that! :cool:

    In the bulletin you...
  23. Replies
    21
    Views
    1,091

    Re: Bizhub C368 / C558 Firmware the same?

    So in essence you are saying the same thing that Synthol said. You install the "special" firmware when there is an issue that is corrected by it.
  24. Replies
    21
    Views
    1,091

    Re: Bizhub C368 / C558 Firmware the same?

    It's not just you, it's me too. I was also trained to NEVER install "special" firmware unless that firmware covers an issue or problem the machine is experiencing. Base firmware always.
  25. Replies
    23
    Views
    1,568

    Re: Can't start firmware update in c258

    I've never seen anything like this mentioned for KM, nor have I ever had an issue updating with the network cable plugged in. I do know that when I worked on Ricoh/Savin lines, it was a requirement,...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4