Search:

Type: Posts; User: qbert69

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds.

  1. Re: C250i tick tick tick at idle demo and cause

    Just posted a question on the vid.[emoji41][emoji1303]

    Sent from my SM-N950U1 using Tapatalk
  2. Re: Seriously, what is going to be done about fusers!? ALL BRANDS

    Screw Teflon...why not Ceramic non-stick???[emoji848]

    Sent from my SM-N950U1 using Tapatalk
  3. Replies
    16
    Views
    3,081

    [Annoying] Re: Stupid Armadillos

    Rudolf Diesel likes .22 Springers & Vaseline Dabs!!![emoji1787][emoji38][emoji23]

    Sent from my SM-N950U1 using Tapatalk
  4. Replies
    0
    Views
    123

    Weather Modification History...

    Not much to say here, other than...This is EXTENSIVE INFORMATION!!![emoji15]

    https://weathermodificationhistory.com/

    Sent from my SM-N950U1 using Tapatalk
  5. Replies
    15
    Views
    671

    Re: Bizhub only scanning to TIFF

    Choose the settings you like in scan mode then go into system settings->user settings->scan settings ->set current as default (should lock it in...not in front of a machine right now!)
    Good...
  6. Replies
    15
    Views
    671

    Re: Bizhub only scanning to TIFF

    SCANNING BRAH!!! *NOT* PRINTING!!!
    ...check your linky!!![emoji57]

    Sent from my SM-N950U1 using Tapatalk
  7. Re: Need help printing 5.5" x 8.5" booklets on C550i

    Yep!!! End user doesn't realize that all the pagination is done in the print driver!!!...and because of that, the double page spread layout doesn't work the way they expect it to!!!...single pages...
  8. Replies
    2
    Views
    223

    [Misc] Re: Typical copier issues

    Brand of machine???[emoji848]

    Sent from my SM-N950U1 using Tapatalk
  9. Replies
    23
    Views
    1,863

    Re: I need to vent a little

    Lady! LET THE G0DD@MNED GEL PEN INK DRY BEFORE RUNNING IT THRU THE ADF!!![emoji2959][emoji23][emoji38][emoji1787]
    ...do an ink dry time smear test right in front of her!!! Gel ink vs standard ball...
  10. Re: 100 + print drivers to create and configure

    Print driver presets within the print driver. Some manufacturers allow you to save the presets to a folder. Once all presets are saved to the folder, the folder of presets can be copied to a server...
  11. Replies
    614
    Views
    57,819

    Poll: Re: Do you trust the media?

    Pay Attention!!!

    TLAVagabond * DLive

    Sent from my SM-N950U1 using Tapatalk
  12. Re: Bizhub C220 cyan color registration shift on one side after black drum replace

    A definite note that dirty/contaminated laser slit glass can create a "soft", meaning de-registered and lightened image due to the dust/toner "scattering" the write beam on the drum...
  13. Thread: C7000 Bizhub

    by qbert69
    Replies
    6
    Views
    339

    Re: C7000 Bizhub

    Any rubber feed rollers that are dusted with paper dust or glossed over that need to be cleaned with rubber cleaner???[emoji848] sometimes slippage can occur from dirty/fouled feed rollers!!! Can...
  14. Re: Bizhub C220 cyan color registration shift on one side after black drum replace

    I've seen the "fade" or non-existent color happen if the dev unit of a particular color is not aligned properly with the drum so that the developer mag roller with toner on it can properly brush...
  15. Re: Bizhub C220 cyan color registration shift on one side after black drum replace

    IDC sensor usually at the end of the ITB, just below it and above the registration roller. I've also seen them right above the ITB, right before the fuser...usually a solenoid actuated shutter...
  16. Replies
    11
    Views
    1,375

    Re: Jams Tray 2 bizhub 4 series printers

    Spot On!!! We had some 808's that had about 1.5 million copies on them that were misfeeding... took out feed units and where the one way bearings are, the shafts were polished SLICK!!! Slick shaft =...
  17. Replies
    15
    Views
    996

    Re: company laptops and customer networks

    Laptop <---Crossover Cable--->MFP!!! DERP![emoji2957]
  18. Re: c224 jam "caution, fuser unit is extremely hot"

    Is the paper that's "jamming" glossy, heavy, brochure stock by chance???[emoji848]

    Sent from my SM-N950U1 using Tapatalk
  19. Re: c224 jam "caution, fuser unit is extremely hot"

    It's ALWAYS going to throw the "caution hot fuser" message!!! It's warning you that it's HOTTT!!! DERP!!![emoji2957] Use your Noodle!!! If it's "always jamming", check to make sure the paper medium...
  20. Replies
    10
    Views
    643

    Re: K PDFs counted as color

    Is it true black or is it process (C,M,Y) black??? Is there a sensitivity adjustment in the print driver to bias the detection either towards true black/grayscale or the opposite direction of process...
  21. Replies
    12
    Views
    776

    Re: BH558 Weirdness

    Do an error code reset during startup but instead of doing an error clear, enter the service code to access service and then go to clear all the settings & reset the admin password. Should...
  22. Replies
    13
    Views
    651

    [Misc] Re: BH458e CAD printing issue

    See if autocad has a flatten before sending to print function...other than that I have no other suggestions. It all boils down to the end user knowing WHY their file is spooling so...
  23. Replies
    13
    Views
    651

    [Misc] Re: BH458e CAD printing issue

    The image is multi- layered and not flattened...use a program such as Bullzip to flatten into a single layer PDF before sending to the printer...[emoji57]

    Sent from my SM-N950U1 using Tapatalk
  24. Replies
    11
    Views
    619

    Re: Bizhub 601 Keeps warming up

    Possible fuser drive/power sense board issue I'm guessing...are you able to monitor for proper fuser temps???[emoji848]...just because thermistors are clean doesn't mean the fuser is driven to the...
  25. Replies
    11
    Views
    619

    Re: Bizhub 601 Keeps warming up

    Warming up....sounds like a fuser issue. Check to make sure fuser thermistors are clean...Additionally, might there be a fuser drive board issue??? Just thinking....[emoji848]

    Sent from my...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4