Search:

Type: Posts; User: Andyboachie

Page 1 of 6 1 2 3 4

Search: Search took 0.09 seconds.

  1. Re: Canon image press c1+ printing problem

    I would suggest you check the condition of laser and pre exposure.
  2. [Misc] Re: Toner on background of paper CANON IR ADV C9060PRO

    I think I get your point. But the other side is: how should only magenta be worst, cyan and black, and yellow OK, when the issue is a static buildup? I think the static eliminator works on all...
  3. Replies
    6
    Views
    165

    Re: IRA 4025 E748-2010

    Yes, it will work with one from another machine.
  4. [Misc] Re: Toner on background of paper CANON IR ADV C9060PRO

    Have you tried replacing drum units of the colors involved? They appear like leaking units. For instance the image shows that you see those droplets even if you don't have original document on platen...
  5. Replies
    9
    Views
    215

    Re: IR ADV 4051 print quality issue

    Try a stop test before immediately before the fixing unit to see if you see it the same. If not check the situation of the fixing unit. If not, carefully clean every one of the laser lenses and the...
  6. [Jamming] Re: Canon ir 3235 jams paper and keep on showing printing on scree

    There is a solenoid under the three clutches (CL1, CL2, CL3) below the lower left of the main drive motor, when you open the back.
    Over time, it turns sticky. This is because of the foam placed in...
  7. Replies
    9
    Views
    215

    Re: IR ADV 4051 print quality issue

    Hi,
    Interchange a working dev unit with that of the problem machine and see what you get.
  8. [Jamming] Re: Papper Jump When setting finisher collate

    Hello,
    Do you work as a technician? Please clarify whether you mean "paper deck 2" when you mention "copy 2.
  9. Replies
    12
    Views
    443

    [Electrical] Re: Error code E003-0000

    Shortage can be caused by connection from fixing unit to the one leading to the DC board. That connection provides power to the main thermistor 1, sub thermistor 1 and sub thermistor 2 that...
  10. [Dead] Re: canon ir5051 cant start normal.Just green light only

    Once it is a sound that repeats itself, open the back look closely/listen carefully. You'll surely find at least the source of the sound. Also, you may find it useful to check at the fixing unit,...
  11. [Dead] Re: canon ir5051 cant start normal.Just green light only

    Yeah! I go with Phil B. Even if there is a sound like that, it is better to be adventurous a bit. Did You open the back of the machine, and turn the machine on to see exactly where the sound was...
  12. Replies
    5
    Views
    455

    Re: Canon ADV 5030 Control Panel Hold Up

    Thanks for this suggestion! I'm a bit far from the place. I will work on and return with a feedback.
  13. Replies
    5
    Views
    455

    Re: Canon ADV 5030 Control Panel Hold Up

    Well it was an E-0000-001 code which occurred after the machine was turned on for a long time.
  14. Replies
    5
    Views
    455

    Canon ADV 5030 Control Panel Hold Up

    Hello,
    I tried to restart Canon IR ADV C5030 after I cleared error code. But the restart could not go through because the progress bar in the dark background was taking an unusually long time to...
  15. Replies
    3
    Views
    386

    Re: HP Deskjet 1112 issue

    Hi,
    When you say it is not working, do you mean the printer is not turning on? If that is not the issue, then clarify with the exact description of the situation.
  16. Replies
    18
    Views
    1,417

    Re: C5030 copy quality

    1. Stir Developer in service mode and see what you get: COPIER>FUNCTION>INSTALL>STIR (M)
    2. Replace the developer with a working one and compare
  17. Replies
    11
    Views
    737

    [CQ] Re: Toner fading away on iRAdv C5235i ?

    Further, check the state of the paper to see if they appear moist. I bet you they can be a culprit. Have a blank plain A3 on platen glass and run a couple to feel the heat in the fixing unit....
  18. Replies
    4
    Views
    346

    Re: Canon IRA 4051

    Could you clarify?
    What have you done around the paper deck before replacing the board, and activating the service mode features? For instance, did you check if a foreign object (Such as a detaching...
  19. Replies
    7
    Views
    686

    Re: IR 2318 Service Code not Responding

    Thanks pal for the video. I hope to make use of it once the the actual trouble is over.
  20. Replies
    7
    Views
    686

    Re: IR 2318 Service Code not Responding

    I will work on that tomorrow and see which of the two options helps.
  21. Replies
    7
    Views
    686

    Re: IR 2318 Service Code not Responding

    Thank you for the response. I tried that and it did not work. I really don't know what might be the cause. I know some earlier versions of the IR used to have the code entered in succession instead...
  22. Replies
    7
    Views
    686

    IR 2318 Service Code not Responding

    Hello,
    I have a situation on hand with Canon IR 2318 copier. I have an E-0000-0001 and wants to enter into service mode to clear it. However, the key combination of *28* does not send me into the...
  23. Replies
    5
    Views
    443

    [Error Code] Re: E065-0001 on Canon IR Adv 6075

    First try a working primary charging unit. If it continues, start from the connection from the primary charge unit to the HVU (High voltage unit), remove and carefully fix the HVU and its connections...
  24. [Jamming] Re: Canon IR 2520 Copier showing Paper jam when powering

    [QUOTE=msquared840@gmail.com;1285619]may i know the sensors to look for?

    i have tried to clean the following sensors;


    pickup
    transfer
    delivery

    [/QUOTE
  25. Re: Faded on left side of page on Canon C255

    Hi,
    Had it not been that you had a perfect PG10 Test, I would try and do a stop test immediately before the paper enters the fuser to see if the fading across happens before or after the fuser. How...
Results 1 to 25 of 150
Page 1 of 6 1 2 3 4