Search:

Type: Posts; User: 1stcavvet

Page 1 of 9 1 2 3 4

Search: Search took 0.01 seconds.

  1. [Wanted] looking for a Canon IC D1550 b/w printer for sale

    looking for a D1550 or even a D1350 customer wants on like the one they have already THANX Courtney
  2. Replies
    0
    Views
    158

    [Wanted] Looking for a working ADF model # SRDF2

    I have a customer in need of a ADF for their kyocera 3035 copier SRDF2 --- it doesn't have to be pretty-- but it has to be in good shape if it need the feed roller kit replaced that's ok PLEASE...
  3. Replies
    2
    Views
    963

    maintenance kit reset Kyocera P2135

    What am I missing here I even looked in the manual---what resets the --Replace the mk message----- is the drum or the dv unit reset itself. Can't find any procedure in the manual. maybe it's...
  4. Replies
    11
    Views
    1,049

    [Misc] Re: Canon ir5050 vertical black stripe on edge

    If you did't find it yet look for something hanging down just under the slit between the slit glass and main glass
  5. Re: HP M602 feeds from both trays simultaneously

    I'd say right off the bat you have solenoids , that are firing at the same time, I say they are probably stuck closed it's worth taking the right side off and see if the solenoids are stuck closed or...
  6. Replies
    3
    Views
    1,061

    Re: rejecting new printhead

    So sorry it's a hp designjet T920 just has 1 printhead probably about a 2 1/2" X 3" block. when I got there it said reseat printhead like someone had removed it and put it back. I...
  7. Replies
    3
    Views
    1,061

    rejecting new printhead

    customer called and said they needed new printhead, went out and installed new printhead. said to reseat printhead installed old printhead said reseat printhead Is this a carrier failure...
  8. Thread: T920 plotter

    by 1stcavvet
    Replies
    2
    Views
    504

    [Error Code] Re: T920 plotter sorry it's a t1300

    Sorry this is actually a t1300 not a t920 I'm figuring is the same sort of issue their IT guy said he updated the firmware ---so he probably never got it pulled down he thinks he downloaded...
  9. Thread: T920 plotter

    by 1stcavvet
    Replies
    2
    Views
    504

    [Error Code] T920 plotter

    Customer called said they are getting a message on their printer "faulty communication with firmware server" they said they tried to install new firmware---not sure if it was the reason they tried...
  10. [Error Code] Re: HP 601 41.03.02 Unexpected Paper Size Message

    Are you pulling a blank page out of the machine, when this happens??? Right off the bat I'd say the paper feed solenoid is sticking That would be my guess.
  11. Replies
    5
    Views
    775

    Re: hp laserjet 2015

    do all the lights go on when it stops printing??? this machine is known for having formatter problems---unplug from computer and print somethings from the menus, reports, configuration page, menu...
  12. Thread: E7-11 error

    by 1stcavvet
    Replies
    7
    Views
    2,593

    Re: E7-11 error

    flip the glass over and clean the white mylar on the end there are some small white tapes on the ends of the adf glass--- that might just be on the older sharps
    probably would't hurt to clean the...
  13. Re: Hp 700 color streaks when making black and white copies

    what ever color comes out on the paper that does not belong there, that toner cartridge is failing change that toner
  14. Replies
    4
    Views
    992

    Re: HP LASERJET PRO M402n

    is the laser shutter opening when you insert toner??? just asking
  15. Replies
    1
    Views
    2,143

    [Misc] Copystar 1815/1820 MFP

    Any one remember how to get into service mode on this machine? I remember something weird like they did with the 1810 copier. hold down start and some other keys--- I have one of these with a...
  16. Thread: HP 602 laser

    by 1stcavvet
    Replies
    11
    Views
    2,684

    Re: HP 602 laser

    that's if it's on the prints if they mean on the display ----then they're stuck in the start-up. usually they turned it off and back on again(could have had a power outage) either way you have to...
  17. Thread: HP 602 laser

    by 1stcavvet
    Replies
    11
    Views
    2,684

    Re: HP 602 laser

    tear in the fuser film GOOD LUCK
  18. Replies
    6
    Views
    1,533

    [Jamming] ricoh mpc 4502 Jams going into fuser

    Replaced a fuser film assembly that had previously blew a big hole in the film---shorted out and showed aSC544----replaced the film reset and started to test it out. jams sometimes with the leading...
  19. Replies
    10
    Views
    1,593

    Re: HP 4250 duplex jamming

    by the way the scotch tape is going to have you back there----it'll cut through and magnetize the arm-------- part of the end of a Q-tip stuck onto 2-sided tape works great
  20. Replies
    10
    Views
    1,593

    Re: HP 4250 duplex jamming

    while the machine is printing duplexing or not it doesn't need an extra paper thrown into the mix, do you see a blank sheet in there somewhere---- usually under the toner cartridge or on it's way...
  21. Replies
    10
    Views
    1,593

    Re: HP 4250 duplex jamming

    check out the paper feed solenoids they are notorious for becoming gummy and sticking GOOD LUCK
  22. Replies
    3
    Views
    1,140

    [Dead] Re: Error pictures of a Z52 Sharp copier

    replace the drum unit and the toner cartridge----if you can find any GOOD LUCK
  23. Thread: HP CM 4540

    by 1stcavvet
    Replies
    5
    Views
    1,112

    [CQ] Re: HP CM 4540

    The prints looked perfect and copies of those same prints are washed out All the colors and black like your looking at the page through a fog
  24. Thread: HP CM 4540

    by 1stcavvet
    Replies
    5
    Views
    1,112

    [CQ] Re: HP CM 4540

    Yes I did, The scanner calibrations, are more for alignment than color so I reran the color calibrations also, both from the adf and the glass. Like I said the machine does prints from the computer...
  25. Thread: HP CM 4540

    by 1stcavvet
    Replies
    5
    Views
    1,112

    [CQ] Re: HP CM 4540

    I'm going back to the customer Monday to check the connections on the interconnect pcb and the DC controller, any other suggestions??? Thanks
Results 1 to 25 of 224
Page 1 of 9 1 2 3 4