Search:

Type: Posts; User: deputydogg

Page 1 of 7 1 2 3 4

Search: Search took 0.07 seconds.

  1. Replies
    7
    Views
    432

    Re: MX3110n wont send fax

    [QUOTE=mojorolla;1888753]Have you tried dumping the fax memory ?
    Adjusted any of the soft switches for VOIP (ECM, baud rates, coding, etc...)


    I have not as I don't have access to Sharp service...
  2. Replies
    7
    Views
    432

    Re: MX3110n wont send fax

    I took a loaner fax machine and used the same phone line and it sent & received fine. The phone line is a 2 wire. With the Sharp machine when you press the speaker and try to send you can hear it...
  3. Replies
    11
    Views
    511

    Re: MX-M 365 ADF issue

    [QUOTE=mojorolla;1875256]In service mode, you can test the individual sensors and figure out exactly which one is causing the issue. If tech support didn't suggest this, Sharp has really gotten bad....
  4. Replies
    11
    Views
    511

    Re: MX-M 365 ADF issue

    I tested all sensors in ADF with Sim 2-2, all passed.
    The jam codes listed are SPPD2_N SPPD4_S SPPD1_N but they are from April, not recent.
    Thanks
  5. Replies
    11
    Views
    511

    Re: MX-M 365 ADF issue

    There is no jam code recorded.
  6. Replies
    11
    Views
    511

    Re: MX-M 365 ADF issue

    S/N 4500368800

    All the sensors in the ADF ?
    Are they the same # ?
  7. Replies
    11
    Views
    511

    MX-M 365 ADF issue

    Machine started about 3 weeks ago displaying “a miss feed has occurred” randomly(2-3 times a day), even if they hadn’t used the ADF. Open/close too cover it would go away. I cleaned all sensors and...
  8. Replies
    7
    Views
    432

    MX3110n wont send fax

    I'm not to familiar with Sharp models but had a customer call with MX3110 that they say will receive but wont send faxes. I'm taking a loaner fax machine I have there to see if it will send &...
  9. Replies
    12
    Views
    646

    Re: Direct sales

    We've had several customers wanting "full size" machines lately(40-50 color 11x17). We sell a ton of "throw away" machines but typically only 2-4 full size machines a year and buy them from acm so I...
  10. Replies
    12
    Views
    646

    Direct sales

    We are a local office supply company and sell a several machines a year which we buy through a couple different vendors. Is there a manufacturer that we could get set up with directly ? We've been in...
  11. Replies
    0
    Views
    105

    IPF8400S error

    Machine first had 03130031-2F50 so I replaced right printhead which it worked for most of the day then they called back and now has 03130031-2F23. What does this indicate, are they related ?
    Thanks,...
  12. Replies
    1
    Views
    132

    Okidata ML320 turbo

    Does anyone have a used or refurbished Oki ML 320turbo or similar for sale?
    Thanks
  13. Replies
    7
    Views
    484

    Re: DP C262 E326 error

    I put the drums back in that were in it originally but they are not OEM either. I'm not sure its worth it to buy OEM drums, if they are still available.

    Do you remember if there was a code to run...
  14. Replies
    7
    Views
    484

    Re: DP C262 E326 error

    I'm not sure but they are not OEM.
    Thanks,
    Dave
  15. Replies
    7
    Views
    484

    Re: DP C262 E326 error

    All of the drums seem to turn freely by hand, new & old ones. Is there a output code to run the drums in service mode ? I ran “developing motor 1&2” , all toner motors, transfer belt motor and they...
  16. Replies
    7
    Views
    484

    DP C262 E326 error

    Machine displaying E326, customer says they replaced all drums and still getting message. I'm not too familiar with Panasonic so just trying to get a heads up before I go out. Any suggestions ?...
  17. Replies
    2
    Views
    271

    HL3170 part #

    Can you get the upper fuser roller separately, if so what’s the part # ?
    Thanks,
    Dave
  18. Replies
    0
    Views
    287

    Oki 320 turbo issue

    The customers old computer crashed which they were using a ML 182 to print invoices. Their new computer doesn’t have parallel so they bought 320turbo with usb. After printing the first page it does...
  19. Thread: M2040DN

    by deputydogg
    Replies
    4
    Views
    333

    M2040DN

    Would this be a good machine to place in a convenience store for self service copies ?
    I thought this may better than something with a touch screen such as M3145.
    It's hard to find something that...
  20. Thread: Bizhub 4422

    by deputydogg
    Replies
    0
    Views
    199

    Bizhub 4422

    Customer has 3 of these and says that about every 4-6 weeks the paper settings have to be reset. Does it do some kind of update that can be turned off ?
    Thanks,
    Dave
  21. Replies
    14
    Views
    5,845

    Re: Brother fuser film grease

    I have a customer that has a DCP-8155 with 575K on it, I use UniFlor 8172 Fixing film grease which usually last 6-8 months. I think I have changed the fuser unit 3 times. They love the machine and...
  22. Re: Okidata MPS3537 vs Toshiba E-studio 347CS

    I was able to get them reset with new fuses.
    Thanks,
    Dave
  23. Replies
    2
    Views
    291

    Re: OKI CX2731 error

    Do you have any info you could send me for the service mode on this model ?
    Thanks,
    Dave
  24. Replies
    2
    Views
    291

    OKI CX2731 error

    Machine had a paper jam, customer removed paper which had not made it to drums yet, now it shows 381 ERROR. All paper sensors are in place, no paper anywhere. Does this indicate a particular sensor ?...
  25. Replies
    2
    Views
    303

    E-studio 347CS vs Okidata MPS3537mc

    Our customer has the oki mps3537, C,Y,M drums are near end of life. None of our vendors have them or an eta . I tried a yellow Toshiba drum but it would not reset the drum message. I know most oki's...
Results 1 to 25 of 153
Page 1 of 7 1 2 3 4