Search:

Type: Posts; User: xring1958

Page 1 of 7 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    1
    Views
    216

    internal test prints stink MX 4070V

    OK this is kinda weird we have a MX-4070 V that when you use sim 64-1 (Test Prints) and position A setting 10 the colors including black are all very muted or faint. The funny thing is when you are...
  2. Re: MX4070 goes to Telephone mode when scanning selected

    Thanks, I actually found it doing a search but your response is appreciated
    Note: This Soft switch is for this is found in Sim 66-1
  3. MX4070 goes to Telephone mode when scanning selected

    Hi Guys I remember a similar issue a few yeas ago when the user tries to scan the machine switches to easy fax telephone mode. I thought I remembered that a device on the telephone line was active...
  4. Replies
    3
    Views
    443

    Toner Pipe units 5141

    Like most of you we have had lots of decomposing toner pipe seals on 10 series machines 3110 3610 2610. Have any of you been experiencing this with the larger units like MX 5141 etc. We are starting...
  5. Replies
    12
    Views
    1,450

    Re: MX 2610 prints only with Windows

    Yes using a generic driver you can print in black you can go into sim 22-10 t see if yours might have it. When you are installing the PS driver make sure you choose the IP address don't let the mac...
  6. Replies
    10
    Views
    2,265

    Re: MXM5071 F2-78 and now dark copies

    Bil Did you ever find the solution we have one doing this? Thanks
  7. Thread: Test chart

    by xring1958
    Replies
    18
    Views
    3,332

    Re: Test chart

    Glass wax & Rain X used them to reduce static for old school Document feeders. Fedreon to clean Lower fuser rollers before Teflon sleeves.
  8. Replies
    8
    Views
    595

    Re: MX-FN27N Connection Harness

    Thanks again we got part in and it worked. I was expecting a cable not a adapter board but all is well.
  9. Replies
    2
    Views
    503

    [CQ] MX-M3070 Weak solids.

    We have a MX-M3070 with about 120K copies on it we recently replaced the Drum and later the Developer. Tech noticed Mag roller was very discolored with a dark Grey coating, Many years ago we had a...
  10. Replies
    8
    Views
    595

    Re: MX-FN27N Connection Harness

    Thanks a bunch. They aren't giving them away!
  11. Replies
    8
    Views
    595

    Re: MX-FN27N Connection Harness

    We actually did it once before but we had a donor/ parts finisher so we didn't need the Part #
  12. Replies
    8
    Views
    595

    Re: MX-FN27N Connection Harness

    I want to connect to a MX-5070V they changed the harness connections a few years ago.
  13. Replies
    8
    Views
    595

    MX-FN27N Connection Harness

    We want to move one of the older FN-27 finishers to a newer machine that has the new connection harness I don't see a harness listed in parts guide has anyone ordered one of these and have the Part...
  14. Replies
    5
    Views
    2,643

    Re: E6-11 MX 4141

    Thanks for the info Prints Charming

    We brought the machine in.

    I cleaned optics checked Copy lamps ( Both Work ) In 63-01 OC had 1 error code and has values DSPF had 0 error code and has...
  15. Replies
    5
    Views
    2,643

    Re: E6-11 MX 4141

    Wouldn't it be nice if they showed it in service manual and did't call it white mylar in parts Manual?

    Thanks for the cofirmation
  16. Replies
    5
    Views
    2,643

    E6-11 MX 4141

    I am trying to help out a tech in a remote location. He is getting an E6-11 on an MX 4141 When I have had this code in the past I pretty much clean everything in the optics area, all mirrors, the...
  17. Replies
    9
    Views
    1,647

    Re: M453N indents

    If you paid for service call you have a right to know cause of lines.

    I have a high opinion of these machines and have many with over double 600K

    It is several generations old but we still...
  18. Replies
    2
    Views
    827

    MX-3110 L-4-06

    We have a MX-3110 that has had multiple instances of L-4-06 Transfer unit lift trouble.
    The machine has made a few trips back to our shop where we have cleaned Transfer position sensors, replaced...
  19. Replies
    12
    Views
    1,377

    Re: Sharp MX-3140n

    I looked at a 3610 and did not see it I also looked at sim 14 in manual and did not see it there. Is this just some markets?
  20. Replies
    5
    Views
    760

    Re: Side seal Powder

    I like that idea BTW the spatulas from amazon were huge really to big for this.
  21. Replies
    5
    Views
    760

    Re: Side seal Powder

    I saw it first at 7500 School and instructor reccomended it. On another post a tech said they are using it on other models and they think it is helping.

    If it saves one developer or drum it will...
  22. Replies
    5
    Views
    760

    Side seal Powder

    I recently ordered some
    UKOG-0309FCZZ side seal powder from Sharp they also had some little spatulas to apply it to the seals.
    After doing so I noticed that I could buy a similar tool form amazon...
  23. Replies
    14
    Views
    2,474

    Re: MX 4070N stripping black developer

    Was it hard like maybe it fused in a hot car? We have had partially fused toner with what we called rocks get into DV unit and block the doctor blade resulting in streaks on Mag roller where toner...
  24. Replies
    14
    Views
    2,474

    Re: MX 4070N stripping black developer

    [QUOTE=NYPRNLA;819395]Sharp sells UKOG-0309FCZZ seal powder to prevent the ends of the drum from wearing out and causing dv pull. In class, the teacher highly recommended using it to prevent dv pull...
  25. Replies
    14
    Views
    2,474

    Re: MX 4070N stripping black developer

    We have talked to Sharp several times about this. Their answer is that it drum wear that is making a short from charger to drum core and pulling Developer out of DV Unit at a slow rate but not enough...
Results 1 to 25 of 166
Page 1 of 7 1 2 3 4