Search:

Type: Posts; User: JonManchester

Page 1 of 4 1 2 3 4

Search: Search took 0.39 seconds.

  1. Replies
    2
    Views
    405

    Ricoh tech needed.

    We are a small Savin dealer in central Illinois and are in need of a service tech for Ricoh and Savin machines.
  2. Replies
    0
    Views
    169

    [CQ] Ricoh MP305 SC672-11

    Just wanted to post that I had a mp305 that had a sc672-11 and it ended up not being a nand flash or a controller, but was in fact a bad fax option. If you get that code slide the fax option out and...
  3. Replies
    5
    Views
    325

    Re: Ricoh Aficio MPC-305SPF

    Open front door and there is a black plastic cover that pops off, usually the BC is in there.
  4. Replies
    30
    Views
    2,486

    Re: MP 301SPF Toner Density/High Background

    The problem with these PCDU's are due to the fact they are meant to run at 16 pages per minute not 31 pages per minute. That being said we have customers that run low volume and have little issues...
  5. Replies
    7
    Views
    572

    Re: MP3351 Vs. MP3352 Fuser

    I've put Ricoh 3350 fusers in 3351 machines and vice versa. Also have put 3352 fusers in 3353 machines and vice versa. When i put a 3351 in a 3352 the machine says to set fusing unit correctly, I...
  6. Replies
    1
    Views
    501

    MP C2003 vs. MP C2004

    I know the c6003 and c6004 can take the same pcu but different dv units and was wondering if the c2003 and c2004 are similar. What similarities between the c2003 and c2004 besides the pcu if any are...
  7. Re: Ricoh MP6002 Toner Dusting and premature DV failure.

    I revised the settings sheet with more info, Thanks guys.
  8. Re: Ricoh MP6002 Toner Dusting and premature DV failure.

    Here's some more interesting things I found on Ricoh TSRC Site.
  9. Ricoh MP6002 Toner Dusting and premature DV failure.

    I know this topic has been covered just wanted to offer a cheat sheet to help those with this problem. I made this from the bulletins and some comments from these forums. If theirs anything I need to...
  10. Replies
    11
    Views
    1,405

    Re: Ricoh Aficio MP 2554 scanner vibration

    We had a MP4054 doing this same thing and it was also throwing an SC120. We eventually replaced the ipu but first we lubed all 4 rails and pads. All is good now.
  11. Replies
    4
    Views
    1,363

    MP5054 vs. MP5055 Similarities

    I started a post about the c4503 vs the c4504, now was wondering the difference in 54 series and 55 series parts. I know pcdu and transfer are the same. Just wondering about fuser or anything else....
  12. Replies
    15
    Views
    2,118

    Re: C4503 vs. C4504 similarity

    Thanks Guys, much appreciated.
  13. Replies
    15
    Views
    2,118

    C4503 vs. C4504 similarity

    How many parts are the same in a C4503 machine and a C4504 machine. I know the itb cleaner and the pcu's are but wasn't sure about other parts, Thanks.
  14. Replies
    6
    Views
    1,065

    [Jamming] Re: Savin MP 305SPF

    All the J020 I've seen were first thing in the morning then after lunch and any big breaks in use in between. I also recommend cleaning the hot roller strippers due to high pitch noise they make when...
  15. Replies
    6
    Views
    1,065

    [Jamming] Re: Savin MP 305SPF

    Try this, I've had more J020 than I can count. Just replace the cheap sensor on the fuser and your good to go trust me. If that works open up the sensor and see the brown tar like substance all over...
  16. Replies
    18
    Views
    2,075

    Re: MP 301 toner condition

    Could be some bad logic, if you have the original birth certificate a memory clear could work. You have nothing to lose if your going after boards anyways.
  17. Re: Rubber tire alternatives for 2090pfk

    Slimbob, Ive been running those AF03-2040 tires in every machines adf and they work way better than the foam reverse rollers. I just slide it off the blue hub and onto the adf reverse rollers black...
  18. Replies
    18
    Views
    2,075

    Re: MP 301 toner condition

    Had this happen more than I can count. Machine tries to add toner and the dv unit gears are chewed up and wont auger toner into PCDU. Adding toner always fills up toner entrance to PCDU and makes a...
  19. Re: Do these smudges mean a new black drum is needed?

    Black PCU or even the developer. Need to check history on both and replace if necessary.
  20. Re: Do these smudges mean a new black drum is needed?

    Those machines had fusers that when the belt started losing its coating this type of copy quality occurred. Only takes a second to pull fuser and flip it to see.
  21. Replies
    7
    Views
    1,588

    Re: Ricoh MP501 Opinion

    We just had a pcu crap out at 140K and the fuser hot roller was ghosting copies but was able to clean the roller to eliminate ghosting. Also had to replace tray 1 lift mechanism due to breakage...
  22. Replies
    22
    Views
    5,461

    [Jamming] Re: Rcoh MP7503 and MPC 5504ex with sadf

    The MPC 03 series have SD/Card Firmware for Accessories firmware for the DF3080SPDF. No need for SP6901. The firmware addresses the timing issue. With the tips stated above and firmware your issue...
  23. Replies
    22
    Views
    5,461

    [Jamming] Re: Rcoh MP7503 and MPC 5504ex with sadf

    If your machine has an SP6901-1 Set it to 1 from zero. It allows higher stackability which slows down the adf a little to eliminate the Jam 63 separation jams. Also we have been taking the old...
  24. Replies
    14
    Views
    3,935

    Re: Dropped out toner density on a MP C2051

    What was the solution to this problem, I'm having same problem. I replaced itb unit, ptr, black PCU and hv board with no change of state.
  25. Replies
    8
    Views
    4,535

    Re: MP 305 J065/duplex jam

    Ordered both AX20-1013 reverse clutch and AX20-1022 duplex clutch. Should both take care of the J065 duplex jams or is it just 1 of these clutches that will fix it, thanks. I seen the picture of the...
Results 1 to 25 of 78
Page 1 of 4 1 2 3 4