Search:

Type: Posts; User: patterson70

Page 1 of 16 1 2 3 4

Search: Search took 0.14 seconds.

  1. Replies
    22
    Views
    484

    Re: Ricoh MP 201 NVRAM Removal Procedure

    Actually, and this will be my last on this, the replacement board is from a MP 171 that may have a mechanical counter. It is the exact same board number and appearance, but it must be different in...
  2. Replies
    22
    Views
    484

    Re: Ricoh MP 201 NVRAM Removal Procedure

    Thank you for confirming that. This is the kind of luck I am having with this repair.

    By the way, I did try the NVRAM upload but it said "Failed". I assumed that was because the BICU Board has...
  3. Replies
    22
    Views
    484

    Re: Ricoh MP 201 NVRAM Removal Procedure

    Could you verify which is the NVRAM Chip from the pictures I am attaching? The first is a close-up of the Ricoh Chip with NV, the second further away and the the third the replacement board's chip...
  4. Replies
    22
    Views
    484

    Re: Ricoh MP 201 NVRAM Removal Procedure

    Apologies, I saw it at some sites referred to as a zero cross electrical issue of some sort and never referencing the fuser.

    Also I am replacing the BICU due to the SC547 due to trying everything...
  5. Replies
    22
    Views
    484

    Re: Ricoh MP 201 NVRAM Removal Procedure

    Thanks but I did swap with a know good fuser and still the same SC547, and I did go into service mode and then power off/on. Still remains.

    I found that the SC547 is also either a bad power source...
  6. Replies
    22
    Views
    484

    Re: Ricoh MP 201 NVRAM Removal Procedure

    Yes, I did go into service mode and then power off and back on. Still the same SC547. Knew about this having to be dome but thanks for the heads up.
  7. Replies
    22
    Views
    484

    Re: Ricoh MP 201 NVRAM Removal Procedure

    Ok about not having to remove the NVRAM unless you want to keep the counter accurate.
    Yes I'm sure about connecting everything properly, swapped the old one back in just to see if the SC547 came...
  8. Replies
    22
    Views
    484

    Re: Ricoh MP 201 NVRAM Removal Procedure

    Thanks for the diagram - I was looking at the NVRAM chip on the BICU Board - I see you are showing the one on the Controller. I don't have a problem with the controller. I'm referring to the big...
  9. Replies
    22
    Views
    484

    Re: Ricoh MP 201 NVRAM Removal Procedure

    Thanks guys, I think I am looking at the right chip, it does say NV right on it.

    Any response to my question as to whether I really need to do it?

    That is, as long as I tell the customer it...
  10. Replies
    22
    Views
    484

    Ricoh MP 201 NVRAM Removal Procedure

    Hello

    Have a MP 201SF that had a SC547. I followed all the advice here and found no resolution.
    (plugged into different power sources, swapped the Power Supply out, swapped the drum unit)

    I...
  11. Re: Ricoh IS330DC Scanner - anyone have a customer still using this 11" x 17" SCSI mo

    Thanks, yes this is why i asked if anyone still has a client using one. If so then maybe it is worth pursuing.

    They don't make these anymore, it is a desktop unit. That is it's only advantage.
    ...
  12. Re: Ricoh IS330DC Scanner - anyone have a customer still using this 11" x 17" SCSI mo

    I checked and it does go to Windows 7 32 bit. That is for the Ricoh software.

    But wouldn't any scanner software work if you use it only as a TWAIN Scanner? (Dumb terminal)

    Such as Nuance...
  13. Re: Ricoh IS330DC Scanner - anyone have a customer still using this 11" x 17" SCSI mo

    Thanks, and just FYI the SCSI interface can be added to any PC that has an open slot.
  14. Ricoh IS330DC Scanner - anyone have a customer still using this 11" x 17" SCSI model?

    I have one of these but it has not been fired up in a few years and not sure if it will even work.

    And don't want to take up the time unless I can sell it.

    Requires a SCSI interface in the PC...
  15. Replies
    12
    Views
    33,194

    Re: Ricoh MP6001 sp error SC863-06

    Lol! Weird how the same guy who said it might be the Fax card also suggested formatting your computer's HDD! I would not have but it's scary that someone might think that was the problem and follow...
  16. Re: HP Phaser 6700 keeps restarting / rebooting. Tried everything

    Last question: For the USB stick, can there be other files on it or should it have only one file called ALTBOOT?
  17. Re: HP Phaser 6700 keeps restarting / rebooting. Tried everything

    Thanks for this. Not sure how to go about this process, can I find this program on the Xerox website? Oh and thanks for the reminder that I mis-typed the brand name!
  18. HP Phaser 6700 keeps restarting / rebooting. Tried everything

    Customer told me her 6700 just started restarting on its own and I can't get it to reset.

    Tried doing what is suggested here in other posts: leaving it unplugged for 15 minutes, plugging into...
  19. Re: Ricoh MPC 3503 et all Drum/Developer Unit with SC-324-05 how to free-up stuck aug

    Thanks to the advice here I was able to free them up finally! Each one took about 10-15 minutes each. I kept turning them and rapping the unit on the floor, almost each time I was able to turn the...
  20. Re: Designjet T3500 Belt Replacement - need instructions

    Thanks, the intentions were good and all opinions are appreciated!
  21. Re: Designjet T3500 Belt Replacement - need instructions

    Thank you for the advice and encouragement as well. I do have the 500+ page service manual. All the parts are shown and how to remove them, just not which ones need to be removed to get the belt out....
  22. Re: Designjet T3500 Belt Replacement - need instructions

    Thanks everyone, I am pretty sure I have the information I need, thanks, especially to Kiran. Indeed the HP Tech I spoke to said he thought about it and decided he was wrong it was similar to the...
  23. Re: Ricoh MPC 3503 et all Drum/Developer Unit with SC-324-05 how to free-up stuck aug

    Thank you
    but it does not tell me which way to turn the gears unfortunately. Any help on that would be appreciated. I am not positive turning in both directions will hurt it but it seems to be the...
  24. Ricoh MPC 3503 et all Drum/Developer Unit with SC-324-05 how to free-up stuck auger

    Hello, have this same problem I have seen posted here and the TSB explanation that the drums were not stored correctly. However, they were stored correctly but maybe in shipping they were not kept...
  25. Re: Designjet T3500 Belt Replacement - need instructions

    No, not at all, thank you, I have asked myself the same question. And also thank you for letting me know it is not the same as the T1100. The guy who told me that is a former HP Tech, so I will ask...
Results 1 to 25 of 398
Page 1 of 16 1 2 3 4