Search:

Type: Posts; User: mga

Page 1 of 20 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    3
    Views
    145

    [CQ] Re: Opinions on what the problem is

    Better samples would be good what's drum life
  2. Thread: Hi - Techie here

    by mga
    Replies
    5
    Views
    67

    Re: Hi - Techie here

    Hello
  3. Replies
    6
    Views
    115

    Re: I'm new in the forum

    Hello
  4. Replies
    11
    Views
    314

    Re: Next generation MP 301

    The next one after mp301 is mp305 its a ricoh the mp401 etc are Kyocera
  5. Replies
    14
    Views
    253

    Re: MP C3003 - toner cartridge out of position

    +1 good call
  6. Replies
    5
    Views
    123

    Re: Ricoh MP C4504 color registration issues

    Why would you start looking at pwb's what's the pm lifes start there 1st what's the copy quality like
  7. Replies
    7
    Views
    216

    Re: Hard Drive on Lanier LD055

    Hope this helps
  8. Replies
    7
    Views
    216

    Re: Hard Drive on Lanier LD055

    The hard drive is behind the top right side cover not on the back of machine
  9. Replies
    5
    Views
    146

    [Misc] Re: Import/Export address book via USB

    I use this method
  10. Re: imc3000A - ADF noise when lifting original bottom plate.

    No there's nothing on there
  11. Re: looking for RICOH SPC435DN FIRMWARE to clear a SC899 CODE

    Done check your pm
  12. Thread: Missing Airprint

    by mga
    Replies
    8
    Views
    245

    Re: Missing Airprint

    I don't think you can see it do you want airprint to work just setup correctly with latest firmware
  13. Re: Ir adv 8295 with error limited functios& feeder unavailable

    Log in user tools and turn limited functions of in device management
  14. Thread: Missing Airprint

    by mga
    Replies
    8
    Views
    245

    Re: Missing Airprint

    It does not have its own firmware airprint is standard on that machine but best if all firmware is up to date but you also make sure certificate is advise in user tools common problem
  15. Replies
    18
    Views
    556

    Re: MPC4502 "overheating"

    If you haven't seen it yourself it's probably just the customer advise he you checked with a smell meter and its within manufacturer specifications {he he}
  16. Thread: IM C2000... SC204

    by mga
    Replies
    12
    Views
    436

    Re: IM C2000... SC204

    There's a common problem on this check ptr earth spring and ITB cleaning unit earth spring
  17. Replies
    18
    Views
    556

    Re: MPC4502 "overheating"

    +1 both if it was overheating you should get error could be ozone smell also mover away from walls
  18. Replies
    4
    Views
    148

    Re: IM C4500 powers off on it's own

    Good luck
  19. Replies
    4
    Views
    148

    Re: IM C4500 powers off on it's own

    Hope this helps good luck
  20. Replies
    0
    Views
    91

    Epson Et-14000 manuals

    Needed service and parts manuals if any one could help thanks in advance
  21. Replies
    4
    Views
    148

    Re: IM C4500 powers off on it's own

    There's a bulletin about this also sc672
  22. Replies
    15
    Views
    589

    Re: MP C3002 No Toner(Bk) message

    Just remove hose from top with bottle is let it load toner see if comes out if it does make sure hose isn't damaged at the ends
  23. Replies
    5
    Views
    275

    Re: firmware upgrade - newer in left column (?)

    This is all current firmware for this machine
  24. Replies
    1
    Views
    73

    Re: Looking for ld540c Lanier Service Manual

    I've sent you pm with all manuals you will need
  25. Replies
    15
    Views
    589

    Re: MP C3002 No Toner(Bk) message

    If you have replaced with new pump and hose. Check bottle is turning I've had that before also open shutter on new pump see if any toner falls out if there is could be dev clutch
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4