Search:

Type: Posts; User: jwai

Page 1 of 8 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    10
    Views
    445

    Re: bizhub C250i foggy backgroud printout

    CYMK all 6.XX%
  2. Replies
    10
    Views
    445

    Re: bizhub C250i foggy backgroud printout

    Sorry, I sent a new sample for reference.
  3. Replies
    10
    Views
    445

    bizhub C250i foggy backgroud printout

    Hi everybody,

    One customer reported that the color printout has a bit foggy background, compare with B/W one.
    The color drums have 60% something and 30% something on black drum.
    The machine...
  4. Replies
    14
    Views
    632

    Re: slanted image on scanning

    Got a copy/scan a rectangle figure on A4 paper through original glass, the image will rotate a bit.
  5. Replies
    14
    Views
    632

    Re: slanted image on scanning

    I lift the scanner several times and got the test, it seems reduced approx 1 degree.
  6. Replies
    11
    Views
    640

    Re: Finisher disappeared

    The machine figure doesn't have finisher showed, I guess the FS board may be defective.
  7. Replies
    11
    Views
    640

    Re: Finisher disappeared

    I ordered one FS board and waiting for delivery.
  8. Replies
    11
    Views
    640

    Finisher disappeared

    Hello,

    I have one 654e that FS-534 finisher had been installed.
    The customer reported paper jam, I found the stapling option has been disappeared in finishing mode.
    Now I disassembly the FS and...
  9. Replies
    14
    Views
    632

    Re: slanted image on scanning

    yes, i printed the bird test page it's fine.
    next i took this page as original and got a scan to PC through original glass, the image had been slanted approx 2-3 degrees.
  10. Replies
    14
    Views
    632

    Re: slanted image on scanning

    bizhub C450i.
  11. Replies
    14
    Views
    632

    slanted image on scanning

    Hello,

    One customer found the image on PC have been slanted about 2 degrees.
    I placed one sample on original glass and got scan, the issue occurred.
    However the cartridge of 2nd and 3rd mirrors...
  12. Replies
    13
    Views
    1,230

    Re: Bizhub 368e smearing

    Now the firmware is G00-11
    Which dipSW need to be changed?
  13. Replies
    13
    Views
    1,230

    Re: Bizhub 368e smearing

    Please check the attached document, thanks
  14. Replies
    13
    Views
    1,230

    Re: Bizhub 368e smearing

    I have similar issue on 368e also.
    It occurred on first print, ONLY on first copy and 1st paper tray, 2nd to 4th trays and bypass OK.
    I got several pages of first copy on 1st tray, and the smear...
  15. Replies
    2
    Views
    169

    AU201S for i series

    Hello,

    I wanna ask the AU201S genuine card reader is compatible with all kinds of card ( HID, Felica etc... )?


    Best regards,
  16. Thread: error c2801

    by jwai
    Replies
    18
    Views
    36,446

    [Error Code] Re: error c2801

    yes, clean it.
  17. Replies
    1
    Views
    182

    finisher output method

    hello,

    on using floor type finisher, how to set the paper output directly without stacking on main tray? (like the sub tray)

    best regards,
  18. Replies
    5
    Views
    335

    Re: bizhub C360 upper latch

    Bingo !
  19. Thread: C226 C6757

    by jwai
    Replies
    1
    Views
    212

    Re: C226 C6757

    in addition, what's the newest firmware version for this model?
  20. Thread: C226 C6757

    by jwai
    Replies
    1
    Views
    212

    C226 C6757

    Hello,

    On January one C226 had been issued with C6757, I checked and fixed it with replaced CIS module.
    Today the customer reported the same code display again, I restarted the machine and tested...
  21. Thread: C300i jam 93-01

    by jwai
    Replies
    4
    Views
    228

    Re: C300i jam 93-01

    this code occurred about 2-3days interval, mainly tray 1 A4.
  22. Thread: C300i jam 93-01

    by jwai
    Replies
    4
    Views
    228

    Re: C300i jam 93-01

    yes, i checked jam history and this code listed.
  23. Thread: C300i jam 93-01

    by jwai
    Replies
    4
    Views
    228

    C300i jam 93-01

    Hello,

    Customer reported that duplex jam has been occurred frequently.
    I visited and got duplex feed test and seems normal, checked the relative components.( duplex rollers, sensors, actuator,...
  24. Thread: c200 c353

    by jwai
    Replies
    2
    Views
    178

    Re: c200 c353

    Thanks a lot.
  25. Thread: c200 c353

    by jwai
    Replies
    2
    Views
    178

    c200 c353

    Hi,

    I kindly to ask, the print head of C200 can be used on C353/C253?

    Best regards,
Results 1 to 25 of 189
Page 1 of 8 1 2 3 4