Search:

Type: Posts; User: jjohnston12385

Search: Search took 0.01 seconds.

  1. Replies
    0
    Views
    331

    [For Sale] Konica-Minolta A00F623200 rollers

    I have an overstock of 7 of these rollers. Willing to let them go for $8.00 each. PM or post here if interested. Will accept PayPal.

    Thanks!
  2. Replies
    12
    Views
    2,535

    Re: C220 freezing when receiving print job

    Potential HDD or RAM problem in the copier? I've had HDD problems do some strange things.
  3. Replies
    7
    Views
    3,526

    [Error Code] Re: BizHub 420 Counter reset?

    Ditto on this. Had a machine that I couldn't clear the counter following the above procedure. FW update fixed this.
  4. Re: C364e issue 2 sided adf. Has dual scanner. CFD60

    I know this was already posted, but when I was doing set-ups in shop, I noticed that in the manual it stated to put that flat ribbon cable a certain way. Well on the "e" series if you put it that...
  5. Replies
    6
    Views
    722

    Re: Question about B/W 754

    Before I left KM last week, I had only been on a couple of service calls for this model range (out of the 200+ in the field). Overall, I feel that this and the 654 are very decent machines. Like...
  6. Replies
    24
    Views
    5,475

    [Error Code] Re: C2557 on BizHub 200

    FINALLY! Got the error to clear and have run several thousand copies through the machine with success. I ended up changing the two solenoids on the tone bottle drive and the reed switch on the...
  7. Replies
    24
    Views
    5,475

    [Error Code] That is exactly how I've changed all developers...

    That is exactly how I've changed all developers and drum on this series. Including the two sets I've put in since this problem surfaced. So I know it's not that. I've got the two solenoids on order...
  8. Replies
    24
    Views
    5,475

    [Error Code] I take it you are referring to the board that...

    I take it you are referring to the board that sits under the scanner optics?

    Sent from my SCH-I605 using Tapatalk 2
  9. Replies
    24
    Views
    5,475

    [Error Code] Re: C2557 on BizHub 200

    Just to give an update on this situation. Me and another tech have been battling with this machine for over a week now. We have changed the Drum/Developer/Developing Unit twice, changed the entire...
  10. Poll: Just Konica-Minolta. Work for a direct branch. ...

    Just Konica-Minolta. Work for a direct branch.

    Sent from my SCH-I605 using Tapatalk 2
  11. Replies
    24
    Views
    5,475

    [Error Code] Is there a way I can test for drive to the drum?...

    Is there a way I can test for drive to the drum? I can't run any test prints because the code pops instantly. I know the main drive gear assembly was replaced within the past month so I'm pretty sure...
  12. Replies
    6
    Views
    364

    Thanks for all the welcomes. I'm hoping I can...

    Thanks for all the welcomes. I'm hoping I can learn a few things here from people that have been in the business for quite some time.

    Sent from my SCH-I605 using Tapatalk 2
  13. Replies
    24
    Views
    5,475

    [Error Code] C2557 on BizHub 200

    Hey guys, I've got a problem machine that I was on for several hours today and drove me insane. It is constantly throwing the above mentioned error code no matter what I have changed. I just replaced...
  14. Replies
    2
    Views
    428

    They sure are. Although, if the serial number...

    They sure are. Although, if the serial number sticker on the machine has a blue dot, then that means the switches were set at the factory. But I've been receiving several new machines without it. So...
  15. Replies
    9
    Views
    2,549

    We just had a C-364 exhibiting these same...

    We just had a C-364 exhibiting these same problems. After checking everything we could, we made a call to KM tech support. They advised us on ordering both a PRCB and an HV unit as it could be either...
  16. Replies
    3
    Views
    666

    Oh I feel ya. Happens all the time. Glad I could...

    Oh I feel ya. Happens all the time. Glad I could help.

    :thumbup:

    Sent from my SCH-I605 using Tapatalk 2
  17. Replies
    6
    Views
    364

    New here

    Hello fellow techs! New forum user here. Been in the trade for just over a year now. Currently employed by KMBS and am formally trained on the 423, 350, 501 series machines as well as all the new xx4...
  18. Replies
    3
    Views
    666

    If memory serves me right, FW isn't needed. It's...

    If memory serves me right, FW isn't needed. It's a specific loadable driver for the card reader. I believe there are 2 or 3 different ones so be careful on which one you download. You will also have...
Results 1 to 18 of 18