Search:

Type: Posts; User: copier tech

Page 1 of 20 1 2 3 4

Search: Search took 0.04 seconds.

  1. Re: Savin MP 5002 Jamming when printing pages with full coverage

    When the print jams is it catching on the stripper pawls, causing what I call a concertina jam?
  2. Replies
    3
    Views
    208

    Re: C5235A C5250 Spare ITB Information

    All the IRA C52xx series ITB units are the same, various parts numbers I use FM0-1765-020 (comes with the belt no cleaning unit)

    The IRA C50xx series use a different style.
  3. Re: C308 unresponsive touch screen everywhere except CE mode

    We've seen a failing HDD cause this, you could try unplugging it see if this has any affect.

    As others have said there is a firmware bug known to cause random HDD errors etc you might also want to...
  4. Replies
    10
    Views
    408

    Re: PCL problem with MP C2030

    Ricoh do still have Windows 10 drivers available for this old model.

    Aficio MP C2030/C2530 Downloads | Ricoh Global
  5. Replies
    5
    Views
    254

    Re: Ricoh MPC4503 Print registration

    Have anyone performed an 'all clear' before you delivered this machine, perhaps while preparing it for a new client etc?

    If so you will need to re-enter the setting from the birth certificate.
  6. Replies
    13
    Views
    483

    [Dead] Re: CANON C3330i Firmware

    Happy to help with the firmware.

    As others have said you can't just fit any HDD to a Canon you have to purchase an identical drive to your failed one.
  7. Replies
    14
    Views
    500

    Re: C2880i Color Displace Help

    Yes if you have another machine to borrow parts from that would be a great help.
  8. Replies
    14
    Views
    505

    [Dead] Re: Canon C5235I

    What do you have on the screen? Are there any LEDs on or blinking?

    You will need the service manual it has a step by step troubleshooting chapter.
  9. Re: MPC 307 multiple prints come out different calibration

    I don’t remember it taking that long to replace this clutch.

    Since you have it apart why not fit the new clutch as a training exorcise.
  10. Replies
    16
    Views
    891

    Re: 307ci Printing Random characters

    Well if all computers/laptops/ipads etc are all on DHCP, as they are by default, setting a printer as a static IP won’t cause an issue & since printers must have an address that doesn’t change this...
  11. Replies
    16
    Views
    891

    Re: 307ci Printing Random characters

    I use DHCP to pull the network details then set the IP static.
  12. Re: Canon IRA C350IF Blank or light streak down the middle

    So you are getting a white line/void ? Can you post a sample of the issue with say a PG10 sample.

    Have you cleaned the laser glass?
  13. Replies
    16
    Views
    891

    Re: 307ci Printing Random characters

    I would expect this to happen if you installed the Ricoh in place of the Kyocera & used the same IP address.
  14. Re: MPC 307 multiple prints come out different calibration

    I guess you checked the reg roller turns freely etc if not you could try lubricating /oiling the bushings if its stiff to turn.

    Traffic was busy today with the boat show on.
  15. Re: MPC 307 multiple prints come out different calibration

    Yes a bit time consuming to get to this clutch have to take a few boards of to access it is covered in the service manual.

    Maybe it has become dislodged during transport/delivery.
  16. Replies
    49
    Views
    6,898

    [Dead] Re: Konica Minolta C360i

    Ah OK thanks. Don't know why KM make if so difficult to recover some issues. if I'm working on a machine after hours & need to call them I have to return the following morning, painful.
  17. Replies
    10
    Views
    464

    Re: C227 internal error

    I'd start first by updating the firmware & then the function version.

    When scanning/copying the HDD is being written to so you could have a failing HDD.
  18. Replies
    16
    Views
    891

    Re: 307ci Printing Random characters

    As you say this is usually caused by a user having the wrong driver. It can also be caused with a user is printing via WSD not IP. So I would disable WSD printing to rule this out.

    & as always...
  19. Replies
    7
    Views
    355

    Re: KYOCERA 3060

    As others have said old model but caused by the drum/dev arching. You could try removing the drum/dev & vacuuming up any stray toner/paper dust.
  20. Replies
    14
    Views
    500

    Re: C2880i Color Displace Help

    We have the pricing on the website. You just need our 1x machine package.
  21. Replies
    14
    Views
    500

    Re: C2880i Color Displace Help

    Yes there are a few models in the series.

    We can provide you with the latest firmware & service manual.
  22. Replies
    14
    Views
    500

    Re: C2880i Color Displace Help

    Yes always worth trying firmware first.
  23. Re: Ricoh MP C2500 Error Code SC672 on Startup.

    SC819 is usually a HDD issue so you could try replacing that you can use pretty much any 2.5” but since you only got that error after moving a SW it could be caused by that.
  24. [Error Code] Re: machine showing wrong installation of DV unit magenta in c224e

    Have you updated the firmware?
  25. Re: Ricoh MP C2500 Error Code SC672 on Startup.

    Try to update the firmware if this fails replace the controller board.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4