Search:

Type: Posts; User: anothertech

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    12
    Views
    683

    [Jamming] Re: problem with ip

    +1 on the firmware, double check the operation panel firmware, sometimes the wrong firmware gets in there, I 've seen it a few times, no idea how it happens.
  2. Replies
    6
    Views
    316

    Re: Savin 9025 SMB firmware patch

    This machine does support SMBv2/v3 when the latest firmware is installed.

     Newly added SMBv2/v3 support.NOTE: This firmware is dependent on the following firmware modules.Please be sure to...
  3. Replies
    6
    Views
    316

    Re: Savin 9025 SMB firmware patch

    9025B, 9025sp or C9025?
  4. Thread: Pro8200

    by anothertech
    Replies
    6
    Views
    564

    Re: Pro8200

    Yeah, because we all read Chinese here on this English language forum.
  5. Re: Sc 66x occurs - sp mode displayed in japanese

    All the PDF says is to refer to the manual, they could put out a PDF for every code there is and it could just say the same thing...refer to the service manual.
  6. Replies
    15
    Views
    1,163

    Re: MP C6004 paper curling

    How many copies on the fuser? Might need a fuser rebuild.
  7. Thread: mp 2000

    by anothertech
    Replies
    19
    Views
    1,137

    Re: mp 2000

    Google Image Result

    That, or the nice line of red cards the poster has by his name.
  8. Re: Ricoh Firmware Update Tool!! Oh wait, it doesn't work.

    That model machine boots up very slow, I always turn off java if it's not being used, change SP 5730 from 1 to 0.

    Then the firmware update starts a lot sooner, otherwise you have to wait quite a...
  9. Replies
    7
    Views
    643

    [Misc] Re: Ricoh mp301

    Your first post said you had already done the firmware.
  10. Replies
    30
    Views
    2,177

    Re: Screwdriver of choice - Ricoh

    I have to keep a separate Dr bag tool kit for Plockmatic, everything is different.
  11. Replies
    30
    Views
    2,177

    Re: Screwdriver of choice - Ricoh

    That old Royal was a good machine.

    I use this Vessel No.220 Ball-Grip Screwdriver (JIS) (+2)x200 300mm Long
    $14.00 US at Amazon.
  12. [Misc] Re: Can anyone explain the copier process like what type of charge is genrated

    I can never seem to remember what charge is on the drum or if you block the slit glass will it be white or black on the paper. I don't think remembering all of that is necessary to service MFP's...
  13. Replies
    25
    Views
    1,658

    Re: MPC2003 white image repeat

    This is a long shot but, could it be that the PCU heater is not working?

    50224
  14. Replies
    25
    Views
    1,658

    Re: MPC2003 white image repeat

    There is a discharge lamp for each PCDU and that could be the problem. Try turning on the discharge lamp on service mode.
  15. Re: Ricoh Firmware Update Tool!! Oh wait, it doesn't work.

    Yes good point, a small SD card is needed. you would think Ricoh would have changed to accept larger cards by now.

    Did you get the machine updated?
  16. Re: Ricoh IM550f copier document feeder broken parts.

    What is wrong with the feeder, will this tech pub from the MP 402 help?

    50206
  17. Re: MPC 307 multiple prints come out different calibration

    Don't go to Mexico, no one goes there anymore...too crowded.
  18. Replies
    10
    Views
    873

    Re: Ricoh MPC4503 scan problem

    It should work, are you sure about the firmware versions?
  19. Replies
    7
    Views
    497

    Re: MP C307 locked

    I sent him a private message with factory mode instructions, he said it worked, he's all fixed.
  20. Replies
    7
    Views
    476

    [Electrical] Re: Pin voltage testing on boards

    If you go to Amazon and search needle tip meter leads you will find plenty.
  21. Re: Ricoh MP C2500 Error Code SC672 on Startup.

    What is that setting labeled? and how to set from off to off?
  22. Re: Reason I haven't been around for a little while

    Sorry for your loss Debs. Tell us some stories about your dad when you come back.
  23. Replies
    4
    Views
    374

    Re: Thoughts on Plockmatic?

    They are still built with steel, but the motors and sensors seem to be less reliable. They are a different animal, it's hard to get real proficient on them when I only have a few out in the field....
  24. Replies
    4
    Views
    374

    Thoughts on Plockmatic?

    The current production machines from Ricoh, 7200, 9200, 8300, run really well but the weak spot seems to be the Plockmatic. When they are used heavily the Plocks don't seem to hold up too well, I get...
  25. Re: RICOH Firmware Update Tool allows users to install firmware updates themselves.

    I have not had an issue arise yet, seems pretty solid so far.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4