Search:

Type: Posts; User: fshead

Page 1 of 20 1 2 3 4

Search: Search took 0.10 seconds; generated 23 minute(s) ago.

  1. Replies
    8
    Views
    256

    Re: I need c2503 Firmware

    tell machine :just keep working" dont sleep"
  2. Re: Anything new with setting up scan to folder on win 10?

    thanks all
    i am trying to get them to buy a mpc3003 but they are cheap and just bought 7k worth of new PCs.........
    I am waiting for the fuser or set of drums needing replacement to force the...
  3. Re: Ricoh sp5200 /5210 code sc820 need firmware?

    18 years and 1st and only post you want firmware in the wrong place to post???????????
  4. Re: Small Law firm needs printing/copying client accounting

    I agree most lawyers suck and think you charge too much....And they charge too little....
    Think about what they get away with..They charge you for their time and then want to be "reimbursed" for...
  5. Anything new with setting up scan to folder on win 10?

    HI
    I just unboxed and set up 10 HP all in one PCs but have yet to swap out their older WIN 7 DELLS,pending them collecting old saved items.
    As they still have a mpc3501 which was configured to scan...
  6. Replies
    33
    Views
    1,090

    [Error Code] Re: MP C3502 SC554 problem

    i hear you.
    Maybe in some parts of the world access to parts are limited/expensive?
    I rather make a jig from scrap parts machines than pay $30 for a fuse that cost 30 cents to make.
    Not everyone...
  7. Replies
    33
    Views
    1,090

    [Error Code] Re: MP C3502 SC554 problem

    you dont need a fuse.
    you can make a reset jig using wire,a microswitch and connector from a thermistor mp5500.
    But if you did not put unit together right then that needs to be checked/fixxed....
  8. Replies
    10
    Views
    421

    Re: 3m service vacuum cleaner

    THANKS
    I HAVE not used KATUN in over 12 years..........
    got burned with a lot of bad drums and toner
  9. Replies
    10
    Views
    421

    Re: 3m service vacuum cleaner

    where were you finding the filters
    i have not bought a new filter in many years and had a stock that has dried up..
  10. Replies
    3
    Views
    171

    Re: Canon ir1435if ID and PIN RESET

    ok i figured it out
  11. Replies
    3
    Views
    171

    Re: Canon ir1435if ID and PIN RESET

    still the same.

    i repowered unit and tried to do network and still does not allow access with 7654321
  12. Replies
    3
    Views
    171

    Canon ir1435if ID and PIN RESET

    HI
    I just pulled a Canon ir1435if from shop that i need to drop in as a loaner.
    I cant get on to change network as default ID and PIN DO not work
    7654321..i looked to clear in service mode did not...
  13. Replies
    8
    Views
    489

    Re: CANT CLEAR J001 on a mpc401sr

    something new to check all switches/sensors b4 thinking bad interlock...
  14. Replies
    8
    Views
    489

    Re: CANT CLEAR J001 on a mpc401sr

    TURNED out to be a small torn piece of paper in the sorter after i pulled sorter out.......
    very odd that it pointed it to be at the duplex section...............
    At least I didnt have to swap out...
  15. Replies
    3
    Views
    265

    Re: MO52 sp5200s b/w copier wth sc 925 sc 870

    as i had a extra free hour i pulled the memory chips and cleaned them and swapped the HDD and put the original HDD on my docking bay and it never came
    up up when connected via a usb cable.
    so it...
  16. Replies
    13
    Views
    696

    Re: C4503 vs. C4504 similarity

    i have yet to see any 04s but would assume knowing rico suave the boards will be different.........
  17. Replies
    8
    Views
    489

    Re: CANT CLEAR J001 on a mpc401sr

    thanks
    i dont think the sorter path is used on the mpc401/mpc401sr series.
    it is the same design as the mpc300/mpc400 where it is all located on the right side door unit..
    I pulled apart a mpc400...
  18. Replies
    34
    Views
    1,709

    Re: helpme,to reset password Ricoh Mp c2550

    Good for you dumb ass..
    good luck with that crappy box anyway........................
    for a print shop...............
  19. Replies
    34
    Views
    1,709

    Re: helpme,to reset password Ricoh Mp c2550

    what a douche bag.......
    I can buy a print shop but cant pay a tech...........
    Feel free not to log on again as i wont help you
  20. Replies
    8
    Views
    489

    Re: CANT CLEAR J001 on a mpc401sr

    i had them turn the sorter jam know and nothing came out and the panel seemed to tell me the jam was in the duplex area......
    Now i dont know if it is a bad sensor but would assume if it was a jam...
  21. Replies
    8
    Views
    489

    Re: CANT CLEAR J001 on a mpc401sr

    thanks..
    had accnt take a picture of screen with front door open and closed.
    was told The screen stays the same with the front door opened or closed.44833
  22. Replies
    34
    Views
    1,709

    Re: helpme,to reset password Ricoh Mp c2550

    ok then call a local tech to service it and if he is a tech he can maybe get the info for you............
  23. Replies
    34
    Views
    1,709

    Re: helpme,to reset password Ricoh Mp c2550

    plus I for one will not post the superviser info..
    too many copy tech wannabees out there............
  24. Replies
    34
    Views
    1,709

    Re: helpme,to reset password Ricoh Mp c2550

    there are other ways to find the password using a hex editor.....
    if i remember right sandy did it on a machine......
  25. Replies
    8
    Views
    489

    CANT CLEAR J001 on a mpc401sr

    hi
    i was at an account yesterday showing j001 and the screen showing me the paper would be in the duplex area.
    I pulled the duplex bottom sensor wth the ground strap and cleaned the one near the...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4