Search:

Type: Posts; User: tr210907

Page 1 of 2 1 2

Search: Search took 0.08 seconds.

  1. Thread: SCX-8040

    by tr210907
    Replies
    5
    Views
    1,425

    Re: SCX-8040

    Thank you for your input. Any simulations that should be ran after replacing the unit? Or will it detect new unit and do everything on its own? Thanks again..
  2. Thread: SCX-8040

    by tr210907
    Replies
    5
    Views
    1,425

    Re: SCX-8040

    Out of 300+ views no one has any feedback or input? Just looking for a little help from those who are familiar with Samsung’s.. I may even have letters wrong in model name I know for sure it’s an A3...
  3. Thread: SCX-8040

    by tr210907
    Replies
    5
    Views
    1,425

    SCX-8040

    We are solely Sharp Dealer but had a Samsung SCX-8040 donated. So we past along the gift to a local small church with the agreement they can have for free but we would be unable to put it under...
  4. Replies
    3
    Views
    883

    Re: Sharp MX-3070 password changed

    Been a few instances where replacing the Msata with a card that has been cloned will retain the admin login of said cloned file. Of course this is only in instances where DSK not equipped. Beats...
  5. Re: Service Department New Building-Thoughts and Input

    Do you have any pictures you could share ??
  6. Re: Service Department New Building-Thoughts and Input

    Unfortunately we we did not section off an enclosed section for containing all the toner and developer dust that accumulates oh so quickly we do have a side room in the back that was going to be for...
  7. Re: Service Department New Building-Thoughts and Input

    Thanks for the responses I really like the cage idea. All though ive been one to “borrow” a part at times to get customer back up and running. I attached a few pics what I really want is suggestions...
  8. Re: Service Department New Building-Thoughts and Input

    Company been around for 23 years. Outgrown current location and this is First time we’ve had the pleasure of being able to have a build to suit opportunity.. Don’t want to regret not thinking of...
  9. Service Department New Building-Thoughts and Input

    We are a small Sharp Only dealer that recently renovated adjourning building from a barber shop to a new showroom up front and service department in the back. Looking for feedback on Ideal Service...
  10. Replies
    0
    Views
    340

    Xerox Phaser 6600 S.M.***

    Can anyone help me with a manual for Phaser 6600.. Actually just really need info relating to bypass delivery and feed..

    Let me know if anyone can help..

    T.I.A.
  11. Replies
    1
    Views
    400

    [Error Code] Re: mx 5001n replace cyan developer unit

    Only time ive encountered that message is when tried to use a DV unit from Pastel II into the C-Jupiter II. Of course you can always make the swap just use original harness.
  12. Replies
    9
    Views
    1,154

    Re: FK3 on MX465 web runs out quickly

    Had this trouble also on 565 at a County Recorder they did a lot of B/W reverse and found out in service manual that this model actually advances web based on pixel count/ratio rather than a set...
  13. Replies
    5
    Views
    720

    [Misc] Re: fuser units compatible?

    I have tested this theory and was able to use MX-5141 Fuser ordered from parts in MX-5110 we had at shop. Yes part numbers are different it came to ready and passed paper.

    And for us in the U.S....
  14. Thread: Fuser ?

    by tr210907
    Replies
    4
    Views
    689

    Re: Fuser ?

    That is the cleaning roller.. Have seen them become quite chattery out in field. It can easily be removed so I would assume another tech popped that off.. T
    All 310fu1 come with the roller
  15. Replies
    7
    Views
    1,007

    Re: Sharp AR-M550U

    If machine is on network a bad packet sent over as print job will cause said actions.. Unplug cable and see if it will boot.. If so then must find print job causing trouble or just cancel all jobs on...
  16. Replies
    7
    Views
    4,376

    Re: MX-4111N admin password reset

    There is a dip switch you must turn on on mfp control board once switched the machine will boot up in sim 24-30....
  17. Replies
    6
    Views
    1,173

    Re: MX-4100N hanging

    Had similar symptoms on new 264 a month after install it turned out to be scanner control pwb in my case
  18. Thread: Mx-5141

    by tr210907
    Replies
    5
    Views
    744

    Re: Mx-5141

    I do not know of a sim to add mono button but what you could do is register a Program on home screen with desired scan settings so when they press icon scan will open up with settings you registered...
  19. [Misc] Re: Plastic Cellophane looking substance around fuser-in middle of job

    That there is actually part of roller had one look just like it.. It would still perform but we went and replaced with new MX 270FU1 rebuild would be more costly
  20. Thread: MX C300

    by tr210907
    Replies
    9
    Views
    1,239

    Re: MX C300

    Had this issue before also and one thing that helps is to ensure that phkbe line is a two wire like one that ships with machine and not a 4 wire line
  21. Replies
    5
    Views
    608

    Re: AR455 Washed Copies

    Do not want to insult intelligence but for the pm 455nd was dev used right.. Only saying because I had new tech call me other day with samples similitude to your example and after going through list...
  22. Re: Sharp MX 3100N Smears across page Changed cleaning Blade no help

    Had a similar looking defect on an MX-2600 today. Process unit and Primary Belt were the first things that went through my mind also.. But upon close glance mine ended up being Fuser related......
  23. Replies
    4
    Views
    535

    Re: IR 1730---Quit Printing via USB

    This message appears on all Computers the machine gets attached to.
  24. Replies
    4
    Views
    535

    IR 1730---Quit Printing via USB

    Have a Canon Imagerunner 1730 that a customer prints via USB. After a lightning storm The device is no longer recognized by any computer it becomes attached too. It comes back with Descriptor I.D....
  25. Replies
    9
    Views
    6,988

    Re: Export and Import settings for sharp MFP's

    [QUOTE=redserv;477079]Wow, that's really good to hear, I will take this information as you can import/export between different model MFP's.[/QUOTE


    i have not had much luck going from AR to MX...
Results 1 to 25 of 37
Page 1 of 2 1 2