Search:

Type: Posts; User: trapps

Search: Search took 0.14 seconds.

  1. Replies
    3
    Views
    728

    trapps

    Brian,
    Just some additional info regarding linestackers, had some weird intermittent jams, static build up, anyway there is a new mod static brushes to be fitted at entrance as paper enters stackers...
  2. Replies
    3
    Views
    728

    trapps

    Brian,
    I have had the same problem months ago and it is intermittent.After reseating connectors between units and reloading roms it still reoccured.Eventually i removed the LS and have system as pf...
  3. Replies
    21
    Views
    4,082

    trapps

    Some success with stretching the original (gold) c6500 springs or fitting c500 springs(better bet).Know of one that flipped with c500 springs. I swopped c500 blade and springs and fitted it to c6500...
  4. Replies
    4
    Views
    1,301

    Have a look at pre-reg loop motor pin and gear is...

    Have a look at pre-reg loop motor pin and gear is worn and has excessive play, you should sometimes get j31 codes intermittently
  5. Replies
    3
    Views
    3,565

    trapps

    CMYK, there is a patch for this problem, its heat-related and cause by airflow.Make sure m/c is away from wall and filters are not blocked.
  6. Thread: C6500

    by trapps
    Replies
    20
    Views
    3,937

    trapps

    I have seen this problem just yesterday, but more obvious on 300g stock.If i run a halftone 100 on magenta/cyan you see it, however on 80g stock not so pronounced.Did a test in showroom m/c exact...
  7. Thread: C6500

    by trapps
    Replies
    20
    Views
    3,937

    trapps

    Apparently for the marks on drum issue, the workaround is to swop one of the other drums in the mc to the black position(which ever one is the problem) and replace the one swopped with a new one.This...
  8. Thread: C6500

    by trapps
    Replies
    20
    Views
    3,937

    trapps

    Have you been experience rhs side exchange filter clogging with toner, we just replace or vac more frequent?What about feeding probs 300g stock?
  9. Thread: C6500

    by trapps
    Replies
    20
    Views
    3,937

    trapps

    I have heard of fuser gear failure (possible one) but no developer probs besides some new tanks supplied with damaged mylars.
  10. Thread: C6500

    by trapps
    Replies
    20
    Views
    3,937

    trapps

    Some faulty write units and premature transfer belt problems had been experienced and marks on mainly the black drums.
  11. Thread: trapps

    by trapps
    Replies
    2
    Views
    995

    c500 and 8050 jamming and quality issues.

    Thanks for your response, had one that was giving j 92-01 codes.I looked at drives, fuser exit, sensors in inverter etc.Eventually cleaned rollers on adu,m/c run for 2 to 3 weeks and problem ...
  12. Thread: trapps

    by trapps
    Replies
    2
    Views
    995

    trapps

    Are there any Konica Minolta techs that have lots of experience on colour 8050 and c500 machines?
  13. Replies
    2
    Views
    1,139

    trapps

    Ex-xerox docutech working on Konica Minolta production b/w and colour products for about a year now.
  14. Replies
    2
    Views
    1,139

    An ex-xerox docutech,nuvera,dp180 highlight color...

    An ex-xerox docutech,nuvera,dp180 highlight color tech presently working on KONICA MINOLTA 920,1050b/w ,c500,8050,c6500 color products.
Results 1 to 14 of 14