Search:

Type: Posts; User: fshead

Page 1 of 20 1 2 3 4

Search: Search took 0.08 seconds; generated 23 minute(s) ago.

  1. parting out a RICOH MPC2503 COLOR DRUMS ONLY 444 COPIES

    I bought a mpc2503 to part out the 3-4 extra tray and right side door for another machine.
    Willing to sell boards drum/dev units cheap.
    drop me a reply
  2. Re: good working pulls ricoh toner pumps mpc2000/c2500/c3000,maybe others cheap

    i sold two have one left..
    might have access to more if needed
    my email
    andy.kogler@gnail.com
  3. Re: Ricoh MPC4503 with Bridge Unit and SR3140 torn edge and wrinkling

    did you open a fresh ream of paper and run?
  4. Re: Ricoh MPC4503 with Bridge Unit and SR3140 torn edge and wrinkling

    did you try running legal or other trays?
    try running not to sorter?
  5. Thread: 2550B

    by fshead
    Replies
    14
    Views
    572

    Re: 2550B

    I AGREE pulling laser unit,blowing out fan,taking the drum mylar and cleaning it with water not windex or chemicals.
    I also try to reform that mylar back to where drum seals tight..
    The big issue...
  6. Thread: 2550B

    by fshead
    Replies
    14
    Views
    572

    Re: 2550B

    I hate those drums and am glad i and my lungs dont do nor see them anymore..
    toner dumpamatics..........

    it is the one machine you need your shop vac to service..
    good luck
  7. Replies
    9
    Views
    602

    Re: Reset service mode

    just do 5801-01 reset all...........
    158 post and 0 rep.....................
    ANOTHER LEACH
  8. Replies
    5
    Views
    256

    Re: Weird problem MP c5502a

    MAYBE ANN and MARY have a secret relationship,,undercover..............
  9. Replies
    9
    Views
    424

    Re: I need c2503 Firmware

    tell machine :just keep working" dont sleep"
  10. Re: Anything new with setting up scan to folder on win 10?

    thanks all
    i am trying to get them to buy a mpc3003 but they are cheap and just bought 7k worth of new PCs.........
    I am waiting for the fuser or set of drums needing replacement to force the...
  11. Re: Ricoh sp5200 /5210 code sc820 need firmware?

    18 years and 1st and only post you want firmware in the wrong place to post???????????
  12. Re: Small Law firm needs printing/copying client accounting

    I agree most lawyers suck and think you charge too much....And they charge too little....
    Think about what they get away with..They charge you for their time and then want to be "reimbursed" for...
  13. Anything new with setting up scan to folder on win 10?

    HI
    I just unboxed and set up 10 HP all in one PCs but have yet to swap out their older WIN 7 DELLS,pending them collecting old saved items.
    As they still have a mpc3501 which was configured to scan...
  14. Replies
    33
    Views
    1,523

    [Error Code] Re: MP C3502 SC554 problem

    i hear you.
    Maybe in some parts of the world access to parts are limited/expensive?
    I rather make a jig from scrap parts machines than pay $30 for a fuse that cost 30 cents to make.
    Not everyone...
  15. Replies
    33
    Views
    1,523

    [Error Code] Re: MP C3502 SC554 problem

    you dont need a fuse.
    you can make a reset jig using wire,a microswitch and connector from a thermistor mp5500.
    But if you did not put unit together right then that needs to be checked/fixxed....
  16. Replies
    10
    Views
    593

    Re: 3m service vacuum cleaner

    THANKS
    I HAVE not used KATUN in over 12 years..........
    got burned with a lot of bad drums and toner
  17. Replies
    10
    Views
    593

    Re: 3m service vacuum cleaner

    where were you finding the filters
    i have not bought a new filter in many years and had a stock that has dried up..
  18. Replies
    3
    Views
    223

    Re: Canon ir1435if ID and PIN RESET

    ok i figured it out
  19. Replies
    3
    Views
    223

    Re: Canon ir1435if ID and PIN RESET

    still the same.

    i repowered unit and tried to do network and still does not allow access with 7654321
  20. Replies
    3
    Views
    223

    Canon ir1435if ID and PIN RESET

    HI
    I just pulled a Canon ir1435if from shop that i need to drop in as a loaner.
    I cant get on to change network as default ID and PIN DO not work
    7654321..i looked to clear in service mode did not...
  21. Replies
    8
    Views
    507

    Re: CANT CLEAR J001 on a mpc401sr

    something new to check all switches/sensors b4 thinking bad interlock...
  22. Replies
    8
    Views
    507

    Re: CANT CLEAR J001 on a mpc401sr

    TURNED out to be a small torn piece of paper in the sorter after i pulled sorter out.......
    very odd that it pointed it to be at the duplex section...............
    At least I didnt have to swap out...
  23. Replies
    3
    Views
    278

    Re: MO52 sp5200s b/w copier wth sc 925 sc 870

    as i had a extra free hour i pulled the memory chips and cleaned them and swapped the HDD and put the original HDD on my docking bay and it never came
    up up when connected via a usb cable.
    so it...
  24. Replies
    13
    Views
    905

    Re: C4503 vs. C4504 similarity

    i have yet to see any 04s but would assume knowing rico suave the boards will be different.........
  25. Replies
    8
    Views
    507

    Re: CANT CLEAR J001 on a mpc401sr

    thanks
    i dont think the sorter path is used on the mpc401/mpc401sr series.
    it is the same design as the mpc300/mpc400 where it is all located on the right side door unit..
    I pulled apart a mpc400...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4