Search:

Type: Posts; User: T911

Page 1 of 20 1 2 3 4

Search: Search took 0.06 seconds.

  1. Thread: WC-7545

    by T911
    Replies
    2
    Views
    222

    Re: WC-7545

    It was fw update
  2. Thread: WC-7545

    by T911
    Replies
    2
    Views
    222

    WC-7545

    this one will not but up and tells you to shut down. I turn the switch off but it doesn't want to shut off, i have to pull the plug to try the resart. it is stuck on the xerox screen. im going to...
  3. Thread: B8045

    by T911
    Replies
    0
    Views
    99

    B8045

    this one has a BFO-1 finisher on it but i need to swap. can i put a 2AH finisher on it with the same bridge.
    Thanks
  4. Thread: XEROX WC-7545

    by T911
    Replies
    2
    Views
    193

    XEROX WC-7545

    Is this model supported by xerox anymore. Is it discontinued? Thx
  5. Thread: XEROX B8045

    by T911
    Replies
    11
    Views
    684

    Re: XEROX B8045

    Okay thanks anyway
  6. Thread: XEROX B8045

    by T911
    Replies
    11
    Views
    684

    Re: XEROX B8045

    Murv,

    I don't have another b8045 to re-image the 4gb sdhc with. do you have one that you can share with me. thanks
  7. Thread: XEROX B8045

    by T911
    Replies
    11
    Views
    684

    Re: XEROX B8045

    anything stored on the sd or just put in a blank one, fw reinstall? Does it need to be formatted before install? X not my cup of tee. Kyo guy
  8. Thread: XEROX B8045

    by T911
    Replies
    11
    Views
    684

    Re: XEROX B8045

    I have a b8045 with the same problem listed above. My code on the LED Display is 5. Help Appreciated. Thanks
  9. Thread: 2553ci

    by T911
    Replies
    11
    Views
    995

    2553ci

    Anyone know how to default a tray for incoming faxes on this one I don't see it in system menu anywhere. Thank you
  10. Replies
    3
    Views
    529

    Re: Ricoh SP C440dn Parts Manual

    I sent you a PM.

    Thanks
  11. Replies
    3
    Views
    529

    Ricoh SP C440dn Parts Manual

    Anyone kind enough to have this part manual to send me. I need to order some parts and need numbers. Thank you
  12. Thread: M5526cdw

    by T911
    Replies
    4
    Views
    945

    M5526cdw

    Having a problem setting up Smtp and smb no error codes just connection error. I think there is a network block but can't get it to work. We set it up in our office and I know it worked. I have it...
  13. Thread: m4125idn

    by T911
    Replies
    1
    Views
    671

    m4125idn

    this one is telling me to check for the appropriate paper through the dp and glass. it recognizes what size it is but when i hit the start it will scan it and give the message, then i need to select...
  14. Replies
    0
    Views
    809

    Ricoh Priport DX4640PD

    I can't get the master to the drum. Cleaned all sensors in master area and solenoid. feeds to the very last roller but doesn't advance to the drum, the motor sounds sluggish. no error codes just...
  15. Replies
    4
    Views
    1,647

    Re: Kyocera taskalfa 5052ci error c7304

    update firmware
  16. Replies
    6
    Views
    1,488

    Re: Canon ir 2525 very light copies and prints

    dev unit would be clumpy on the mag roller if the toner was wet right
  17. Replies
    6
    Views
    1,488

    Re: Canon ir 2525 very light copies and prints

    btw here is a sample copy attached.
  18. Replies
    6
    Views
    1,488

    Canon ir 2525 very light copies and prints

    went with developer unit and drum but not the problem, I think it may be a transfer problem with this one. I can't see any contacts or springs missing. Is there something that may pop off or come...
  19. Thread: DP-7100 on 4002i

    by T911
    Replies
    12
    Views
    2,767

    Re: DP-7100 on 4002i

    thanks guys it was the lift plate rear post broken. ordered the new one and works like a champ.
  20. Thread: DP-7100 on 4002i

    by T911
    Replies
    12
    Views
    2,767

    Re: DP-7100 on 4002i

    Checked wiring and reseated checked feed assly too
  21. Thread: DP-7100 on 4002i

    by T911
    Replies
    12
    Views
    2,767

    DP-7100 on 4002i

    checked event log and the latest listed were j9005 and 9011. DP was disabled when i arrived, reset it came back to life. the lift plate comes up to the pick up roller, press start but it doesn't...
  22. Replies
    13
    Views
    8,396

    Re: mp c5503 fusing belt message

    Fyi, nvram guys. Thanks for the reply's
  23. Replies
    13
    Views
    8,396

    Re: mp c5503 fusing belt message

    Before I pull all the guns out i thought maybe someone came across this out there. Thanks for any ideas.
  24. Replies
    13
    Views
    8,396

    Re: mp c5503 fusing belt message

    Slimslob I really think I went through all of that. I will recheck and test again. This one is killing me.
  25. Replies
    13
    Views
    8,396

    Re: mp c5503 fusing belt message

    A reset fuse for the 03's I thought that was only for the 02's with the 544 error. Am I missing something here.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4