Search:

Type: Posts; User: xerotec

Page 1 of 2 1 2

Search: Search took 0.01 seconds.

  1. Replies
    2
    Views
    228

    Re: BH-C-284e, Options Install Manuals

    Check PM
  2. Replies
    27
    Views
    1,619

    Re: Can't update firmware BH C458

    I use this USB Flash Drive and allways succes.
  3. Re: Konica C284e "Preparing to connect to external server please wait"

    Use NVM reset tool firmware to reset machine to factory default. A145FW.TAR
  4. Re: Does anyone have the ricoh aficio mp c2500 firmware?

    Enable smb v1.0 in win10 .

    Go in Control panel - Programs - Turn Windows features on or off and enabele SMB 1.0

    48620
    48621
  5. Re: C258 - Faded print on one side of 12x18 inches art card

    yes is polygon motor mirrors on laser unit
  6. Re: how to modify dr313 cmy drum to work in K position

    Same thing but you can not move cleaning blade, holes on color and black is not on same place
  7. Replies
    6
    Views
    576

    Re: C6500 Relay Unit & RIP Software

    I have C-304 Creo rip software
    PM me Your e-mail.
  8. Re: how to modify dr313 cmy drum to work in K position

    You can move Drum, Drum Cleaning Blade and PCR to other housing, front Spacer is different and black Drum Cartridge have blockade so you must remove it before use black Drum instead of color and move...
  9. Thread: BIZHUB C754

    by xerotec
    Replies
    2
    Views
    582

    Re: BIZHUB C754

    PM your email and i will send to you
  10. Re: Minolta C6501 - IC-305 controller system software

    You probably have bad sectors on HDD. Check disk for bad sectors and if find any,replace HDD.
  11. Replies
    7
    Views
    2,864

    Re: Boot screen C452

    this is procedure for develop but is same for konica minolta
  12. Replies
    39
    Views
    4,851

    Re: Banding at HP T11xx

    Look as starvation of gray or black color. Are you tray to print 2 copy of this at same time to see
    what happens. Are the same copy
  13. Replies
    1
    Views
    721

    Re: Konica Minolta Bizhub Pro C-5501

    I send the latest firmware for your Konica Pro C-5501
  14. Re: CREO SPIRE CXP5000 Wrong Disk Configuration Error

    check cable from RIP to Machne
  15. Replies
    2
    Views
    388

    Re: bizhub 42 langue software

    There is no your language for this machine
  16. Re: CREO SPIRE CXP5000 Wrong Disk Configuration Error

    this s tech manual for creo password is 6789
  17. Replies
    41
    Views
    4,820

    Re: IC408 controller issue

    sorry bat i have only Konica Minolta fiery ic 408 software
  18. Re: CREO SPIRE CXP5000 Wrong Disk Configuration Error

    just create do not format to any file system
  19. Re: CREO SPIRE CXP5000 Wrong Disk Configuration Error

    do not format striped volume
  20. Replies
    41
    Views
    4,820

    Re: IC408 controller issue

    did you tray to load konicaminolta firmware on ikon machne:confused:
  21. Replies
    1
    Views
    387

    Re: DC2060 color to color misregistration

    tray to clean mob sensor assy
  22. Replies
    8
    Views
    758

    Re: Language change on docucolor 2240

    You need to acces UI diag mode
    Entering the UI Diagnostic mode
    1. At the Control Panel, press job key then press and hold the 0 key for 5 seconds, then press the Start button
    while still pressing...
  23. Replies
    1
    Views
    584

    Re: Xerox 55o Diagnostics mode.

    hold 0 for 10sec. and press green start boton.
  24. Replies
    5
    Views
    1,275

    Re: DC 2060 fusing problem

    Check the oil system. This may happening if you have too much oil on fusing roll.
    Check the oil drain from oil system to oil container.
  25. Replies
    16
    Views
    31,668

    [Error Code] Re: Workcentre 7232 Error Code 089 - 311

    Look IBT cleaning blade assy for waste toner if is full clean and clean way to waste toner container.
    Chek 2BTR.
Results 1 to 25 of 38
Page 1 of 2 1 2