Search:

Type: Posts; User: blackcat4866

Page 1 of 20 1 2 3 4

Search: Search took 0.16 seconds.

  1. Replies
    3
    Views
    209

    [Misc] Re: HP Firmware

    The wide format devices do have a built in utility that can update firmware by itself, but it can lead to interesting issues. If you have slow or unreliable internet service, a firmware update can...
  2. Replies
    2
    Views
    93

    Re: Bizhub Pro C7000 LEF/SEF

    Does the paper auto detect properly on the screen when you adjust the guides? There is a calibration for the tray guides to properly detect paper size. =^..^=
  3. Re: FS-539 Mandatory Modification Bulletin Issued by KM

    Is that the metal guide shaving off the rubber? That's fairly obvious. It sounds like you need to have a new set of rubber rollers on hand before doing the bulletin. Thanks, occus. =^..^=
  4. Re: FS-539 Mandatory Modification Bulletin Issued by KM

    Can be the defect be seen before you start disassembly?

    It would be really disappointing to spend two hours disassembling the finisher ... only to discover that you never needed to. =^..^=
  5. Replies
    11
    Views
    440

    Re: Magenta lines on copies any ideas

    Is the little gray button staying pressed in on the developing unit?
    Is the laser slit glass clean?

    Less likely: perhaps the magenta primary transfer roller is not shifting correctly, maybe...
  6. Replies
    8
    Views
    259

    Re: Commerical fridge and freezer

    Make sure you provide a proper electrical service. I see some wiring in your future. =^..^=
  7. Replies
    8
    Views
    259

    Re: Commerical fridge and freezer

    I thought they might be.

    You have a place at home for them? They're huge. =^..^=
  8. Replies
    11
    Views
    440

    Re: Magenta lines on copies any ideas

    If your copier has a charge roller (or four), I would start with cleaning the magenta primary charge roller.

    I still don't know what model copier you have. =^..^=
  9. Replies
    11
    Views
    440

    Re: Magenta lines on copies any ideas

    It would be nice to see a sample. Something like this:
    And it might help to know what model that you're referring to. =^..^=
  10. Replies
    2
    Views
    181

    Re: C3350i painel glass

    It's not just glass. There's a glass base with mylar sheets over the top of the glass that serve as a touch panel. So the answer is No.

    Konica Minolta only sells the operation panel as an...
  11. Replies
    4
    Views
    176

    Re: Good bye from Polarbear

    Best wishes Polarbear. This business tends to wear people down.

    Remember that you're always welcome here, with or without a tech job. =^..^=
  12. Replies
    6
    Views
    359

    Re: Best Western of all time?

    The Good, The Bad, and the Ugly

    I never could figure out why Tuco called him "Blondie". He wasn't blond. =^..^=
  13. Re: What Is Best Brand Thumb Drive for Firmware Upgrades

    LOL! I usually lose them to the washing machine or leaving them in customer machines.

    Since I stated putting them on a bright neon green lanyard, I hardly ever lose them. =^..^=
  14. Replies
    15
    Views
    347

    [Misc] Re: C3350i and marketplace

    I've removed Marketplace from plenty of those C3350i series. We have a customer that runs PaperCut that insists that it interferes with the PaperCut installation. I've become fairly adept at removing...
  15. Re: TA-3551ci/Slow printing large jobs - color only.

    You know, I wish these things were actually taught, instead of stumbled across bit-by-bit. That's the geat thing about Copytechnet.

    Thanks to PrintWhisperer & Samanator for filling in another gap...
  16. Replies
    7
    Views
    189

    Re: C1060L Fuser Lamp

    I agree. The 3W difference should be insignificant. =^..^=
  17. Replies
    3
    Views
    113

    [Misc] Re: C3070 Fusing Swing Unit

    All that I can suggest to you is to carefully scribe & mark each of the slotted adjustments and attempt to reposition the new part in the exact same place. I'm assuming it's the alignment of the...
  18. Replies
    7
    Views
    189

    Re: C1060L Fuser Lamp

    Are there any wattage markings on either?

    You should be able to take the lamp assy and the holder brackets (as long as the connectors fit).
  19. Replies
    3
    Views
    113

    [Misc] Re: C3070 Fusing Swing Unit

    According to the manual there are factory adjustments to the fuser swing unit that cannot be duplicated in the field. Why do you need to change it?
  20. Replies
    7
    Views
    189

    Re: C1060L Fuser Lamp

    The numbers are similar ... not the same. You probably will not do any harm, but it may give you fuser codes if it doesn't warm up fast enough or if it can't maintain temperature.

    Here's an...
  21. [Misc] Re: Replacing 302K302170 (FRAME REAR UPPER) on 3011i

    I've had a number of scanners off. As long as you leave the scanner internal parts alone, there aren't any critical adjustments.

    In broad strokes;
    Remove the DF
    Remove all the covers
    Disconnect...
  22. Replies
    14
    Views
    782

    Re: DV-610 in C1060 series.

    Just to include some useful details:

    DV-614C has 630gms of developer mix only, 7.5gms for the bag only.
    DV-610C has 1100gms
    =^..^=
  23. Replies
    4
    Views
    207

    Re: e 2550c magenta issue

    Once you provide the sample I can comment.

    I have concerns though, when you swap in used components of unknown provenance, without doing calibrations, and expect something to be fixed. =^..^=
  24. [Misc] Re: Replacing 302K302170 (FRAME REAR UPPER) on 3011i

    This? Number 6:

    54736

    By all appearances you'd have to fully remove the scanner to access the inside of the rear frame. I can't say that I've ever tried to get to that part.

    If you don't...
  25. Re: C1060 with toner pile-up on the 2nd Transfer Unit

    You lost me about half way through.

    If it was the laser causing this issue by writing that band of image (on digital devices the laser writes the text/image, NOT the white areas), the laser would...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4