Search:

Type: Posts; User: copyman

Page 1 of 20 1 2 3 4

Search: Search took 0.36 seconds.

  1. Replies
    4
    Views
    49

    Re: Bizhub C364 Can no longer access

    when in service mode did you see if HDD was installed? System 2.
    Also take left rear cover off and see if HDD is there and connected
  2. Thread: Please Help

    by copyman
    Replies
    10
    Views
    107

    [Error Code] Re: Please Help

    Seems like you covered everything. Is there a separate pwr sup for the IH fuser or is that what you replaced?

    You even replaced the PRCB board that would trigger the fuser to turn on.

    Do you...
  3. Thread: Please Help

    by copyman
    Replies
    10
    Views
    107

    [Error Code] Re: Please Help

    Very interesting. Looked in the parts book and sure enough it shows the different fuser. Probably why that trouble code is different, only used in Japan.

    I never really had any problems with the...
  4. Thread: Please Help

    by copyman
    Replies
    10
    Views
    107

    [Error Code] Re: Please Help

    What have you done so far? Try and do a trouble reset at least? You can Google procedure to do trouble reset.

    The others are correct. I've rebuilt many of these fuser units and they use heat lamps...
  5. Replies
    4
    Views
    49

    Re: Bizhub C364 Can no longer access

    Have you had any lightning storms? Reason I asked is always have a few machines with this symptom during the summer months.

    You can initialize the machine in service mode and re-input settings.
    ...
  6. Replies
    1
    Views
    249

    Happy 4th to all !!!

    To all American patriots on this forum enjoy the holiday.

    And to all the misreable people that hate America move to another country if it's that bad!

    GOD bless America during these tough times.
  7. Replies
    6
    Views
    707

    Re: KM bizhub C3350 ADF problem

    Glad you got it fixed. That is one of the worse feeders. Seems Kon/Min can never design a good small machine as reliable as their bigger copiers. Almost like they don't care that much for the low end...
  8. Replies
    13
    Views
    375

    Re: Konika Minolta c454e color problem

    I agree except genuine color toners from a dealer (most people buy the toner from where they bought the machine) cost $92 for TN321 color and around $55 for black as one example. They can buy...
  9. Replies
    13
    Views
    375

    Re: Konika Minolta c454e color problem

    Glad to help. Good to hear it's working good now.

    Just curious did you replace the complete Dev units or just used aftermarket developer powder in each one?

    Using genuine consumables costs a...
  10. Replies
    13
    Views
    375

    Re: Konika Minolta c454e color problem

    Really hard to troubleshoot when using aftermarket toners. With 600k meter I would look at the Dev units at this point.

    As the other poster said you should only use genuine Kon/Min with color...
  11. Replies
    20
    Views
    532

    Re: Konica Minolta c554e Print quality issues

    I've had your exact issue at least 20 times, I call it the dev white lines of death. Never once has it been a high voltage issue. It has always been an overlife drum of same color as bad dev unit or...
  12. Replies
    20
    Views
    532

    Re: Konica Minolta c554e Print quality issues

    I use to ask for someone to make a donation to this website before sending a manual but since there is no moderation on this forum I stopped doing that. PM me and will send it to you. If you want to...
  13. Replies
    20
    Views
    532

    Re: Konica Minolta c554e Print quality issues

    Do you have the service manual showing where parts are? Many here including myself don't mind helping "novices" or "end users" to a certain point but when the poster asks where things are located not...
  14. Replies
    11
    Views
    350

    Re: Clean the ph unit without taking it apart

    And sometimes "doing it the right way" and taking a machine apart that was put together by robots can cause an issue that you didn't have before taking apart.
    Just my way of doing things but I will...
  15. Replies
    4
    Views
    499

    Re: Married... with Children

    Agree, sometimes a comedy series has a cast that just fit together, and this was one of them. Not to mention how HOT Christine Applegate was on that show!
  16. Replies
    20
    Views
    532

    Re: Konica Minolta c554e Print quality issues

    One of the developers dumped. Take the drums out and look at dev units and you will see one or more of them has little developer on mag roller. Most likely black. Search this forum about "4" series...
  17. Thread: -70 point rep?

    by copyman
    Replies
    5
    Views
    175

    Re: -70 point rep?

    LOL. Thanks for the rep point fatduke. Right after I posted someone took a point from me. Morons keep wasting their time. Fools. Hide behind a keyboard and take a point from someone, oh wow what a...
  18. Replies
    15
    Views
    492

    Re: C654 network port issue.

    I lost four C654's in one building to surge from lightning storm. Funny thing is they all were on the good big square surge protectors! Problem was only the power cord was protected. They didn't have...
  19. Thread: -70 point rep?

    by copyman
    Replies
    5
    Views
    175

    Re: -70 point rep?

    Not sure I fully understand but those Rep points mean nothing. If there was a way I would give you all of my Rep points

    When you help someone on this forum they know and you know how you helped ...
  20. Replies
    11
    Views
    350

    Re: Clean the ph unit without taking it apart

    If at the shop remove all drums & deve units and blow out with compressor. Do the same thing in customers office but use vacuum with long thin nozzle instead of blowing out with air.

    Another thing...
  21. Re: Konica Minolta C360 Moisture and Broken Guide

    Hopefully someone else can help with the guide but wanted to let you know a new fuser will not stop the moisture on fuser. That is from damp paper or maybe a real damp enviroment.
  22. Replies
    8
    Views
    369

    Re: C454e air print function

    These older models were not the best for mobile printing. See attached. Hopefully there is something in there that may help you.
  23. Replies
    5
    Views
    239

    Re: MP C306z Service mode

    Think to turn off authenication mode it's either in Admin mode or maybe enhanced security mode.
  24. Re: Bizhub C353 "Install the imaging unit and close all doors" error

    Think there was a bulletin about installing all image units. I'll see if I can dig it up. But what is concerning is all the other messages you are getting at same time?

    Did you have any lightning...
  25. Re: C451 Bad color when print/copy, but self-test is perfect

    Agree with Syn on this being end of life. It is exactly why I have 2 working C451's trade-in's moving closer to dumpster everyday. I just don't have it in me to throw away perfectly good machines....
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4