Search:

Type: Posts; User: PrintWhisperer

Page 1 of 6 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    6
    Views
    298

    Re: Scan error type: other

    Higher, no. TLS 1.3 will only be seen in the '4' series and beyond.

    TLS 1.2 is supported, but there have been updates to elements (i.e. ciphers) within the TLS 1.2 spec and many new RFC's which...
  2. Replies
    6
    Views
    298

    Re: Scan error type: other

    Yes, get us the code. If it's 3102 then we should talk.

    Also note if the error occurs during heavy usage scanning with several single or small scanning jobs back-to-back.
  3. Replies
    4
    Views
    229

    [Misc] Re: Using Chromebook as a PWS

    You could try ruining a perfectly good Chromebook by putting Windows on it:cool:

    I like mine for browsing because of the keyboard and fast operation but it's no business unit.
  4. Re: Ghosting when doing multiple copies

    This is a symptom which was observed on early model transfer belts before the material was changed. When outputting the same image over and over there would be ghosting of actual image without...
  5. Re: AFP to PCL conversion or printer problem?

    I would say that is your conversion software. It isn't creating raster images but instead using PCL resource control (customer image is PCL resource incorrectly mapped).

    Ulitmately you would need...
  6. Thread: 3252CI

    by PrintWhisperer
    Replies
    16
    Views
    834

    Re: 3252CI

    I believe what they want is for you to do what you were trained to do. Exercise your best judgement because they aren't technicians, that's why they hired you;)

    Most Dealers price a PM into their...
  7. Thread: 3252CI

    by PrintWhisperer
    Replies
    16
    Views
    834

    Re: 3252CI

    By Date….PM kit warranty is by time or volume because both cause degradation. I get that nobody really takes it into account except the engineers who designed it.

    After 4-5 years in the field,...
  8. Thread: 3252CI

    by PrintWhisperer
    Replies
    16
    Views
    834

    Re: 3252CI

    Yupp. Most of those defects are 95mm apart (drum circumference). Drum cleaning failure. Bad toner or clogged system.

    You said you replaced the drums, but was it with new drums because those look...
  9. Replies
    7
    Views
    637

    Re: Kyocera 2554ci brand code

    The breakout feature of the '4' series is the re-vamped interface and vastly increased Network Security.

    Remember though, the 25/35 are OPC models with a 200k drum cycle. For systems with all the...
  10. Replies
    4
    Views
    275

    Re: Adjust print margins

    This is the only hardware level page adjustment and it will affect your copies the same as prints, and only has about 3mm of adjustment in each direction.

    Print margins are APPLICATION controlled....
  11. Replies
    6
    Views
    361

    Re: 306ci Reset Firmware

    A) No, this is for OPC 306ci/356ci ONLY
    B) Resets internal calibration data for Laser Power, which can be corrupted if MM119 is performed on OPC Drum (MM119 Drum EEPROM data set is for ASi drums...
  12. Replies
    6
    Views
    398

    Re: Copier Hoist

    Imagine those four straps with hooks….attached to forklift forks.
  13. Replies
    8
    Views
    4,762

    [Error Code] Re: Keep getting error code F234

    Check/reseat/replace DP relay PWB (mounted to MAIN PWB) and red SATA cable. Also possible ISC PWB problem (other end of SATA cable).
  14. Re: Kyocera FS-3920DN Optional Network Card Setup

    Not supported, IB-21E is for FS-3800.

    No supported card for your device, FS-2020D only device in series to support OPT network card IB-31.

    You have a parallel port so hook it like it's...
  15. Replies
    5
    Views
    303

    Re: Scan from pc at 3640 mfp?

    Possible, but mainly as a Pull scan operation, Send protocols on this system are too old except for FTP.


    Scan FROM PC (Pull) -> TWAIN driver (same as FS-2626, available on product CD), WIA...
  16. Replies
    2
    Views
    263

    [Jamming] Re: Kyocera DF-7110 J6310 jam

    When these finishers get high volume (usually close to 1 million) the 'Relief Drum' traction bands (on the drum wheels) can wear and the pages start slipping in the drum.

    Replace the 'Drum Wheels'...
  17. Re: Ricoh smb scanning with end to end encyrption

    Great work and research with new protocol requirements and thanks for the heads up! This is the kind of thing I usually have to find out with a Wireshark. I have yet to run into anything above SMB...
  18. Replies
    7
    Views
    572

    Re: Copier Showroom

    Nice, needs an area rug and some fake plants, maybe a PC station :cool: but plenty of room and light!
  19. Replies
    5
    Views
    260

    [Error Code] Re: Kyocera FS-4000dn Error 0150

    Question everything, assume nothing. If you want help, be helpful because we don't know what you know unless you tell us.

    Ok, machine in the field which your dealership bought new? Or did it...
  20. Replies
    5
    Views
    260

    [Error Code] Re: Kyocera FS-4000dn Error 0150

    Some history would be helpful, but your C0150 (Engine EEPROM) system is tied to the Main PWB EEPROM and strangely enough, the Drum and can commonly occur after improper Parts Replacement.

    First...
  21. Replies
    5
    Views
    451

    [Misc] Re: Windows users

    Always good advice but this particular quirk I ran into years ago and it may not even apply.

    In certain cases, an Admin can create a password for themselves which doesn't have to comply with the...
  22. Replies
    4
    Views
    287

    Re: CS 300ci - Black Lines at edges

    BC is dead on and here is the main issue. That is basically gen 2 Kyo color after the *ugh* Voyager series. It did NOT have a system to STOP driving color while in BW use as later gens did.

    This...
  23. Replies
    5
    Views
    451

    [Misc] Re: Windows users

    Change the password of the original Administrator and ensure it meets complexity requirements.
  24. Replies
    7
    Views
    659

    Re: Kyocera 2554 machine failure

    This one is getting funky. If you are authorized, have your manager call the Kyo rep because that hop_pls_bk signal needs checking while running U135 along with some other signals like Hopper full.
  25. Re: best monochrome production printer for low cost & reliability

    I felt obliged to add that the 9003i warranty does end at 3 years OR 4.8 million, whichever comes first. This applies to the series which include 7003i/8003i.

    Also, once the warranty has passed...
Results 1 to 25 of 133
Page 1 of 6 1 2 3 4