Search:

Type: Posts; User: IGEN93

Page 1 of 2 1 2

Search: Search took 0.01 seconds.

  1. Replies
    36
    Views
    17,552

    Re: service plan code generator available

    software available

    DM ssphotocopiers@gmail.com
  2. Thread: I need software

    by IGEN93
    Replies
    1
    Views
    193

    Poll: Re: I need software

    DM ssphotocopiers@gmail.com
  3. Re: I need software authorization code generator xerox

    DM ssphotocopiers@gmail.com
  4. Re: I need code activation xerox workcenter 5890

    send me serial number

    ssphotocopiers@gmail.com
  5. Replies
    5
    Views
    459

    Re: Rajistation out Xerox 550

    it is clearly visible that yellow patch is defected and in very low density , adjust yellow developer brush level and your problem must get resolved .
  6. Replies
    5
    Views
    459

    Re: Rajistation out Xerox 550

    for registration problem initially check for any error history , then increase the brush level of each developer assembly and then power on the machine . also try to check for any defects in the...
  7. Replies
    6
    Views
    14,286

    [Error Code] Re: Xerox DC 252 Error 124-374

    to solve registration problem of any production printer check the developer units, try to increase the brush level of each developer units and then run the machine this will solve your problem...
  8. Replies
    6
    Views
    14,286

    [Error Code] Re: Xerox DC 252 Error 124-374

    Try changing the flat battery on the nvm ram and iot board and then enter all the nvm values using the list in the machines tray . this will reset all your data in machines memory and enter the...
  9. Replies
    0
    Views
    274

    [Jamming] XEROX C75, ERROR 077-123.

    Hello everyone, recently got this error on the xerox c75.
    Machine runs all simplex documents , but gives an error while printing on duplex. Error 077-123, after checking the code it says, reg....
  10. Thread: DC5000 ! Help

    by IGEN93
    Replies
    2
    Views
    311

    Re: DC5000 ! Help

    your RIP is not a match to your current model, that is the issue,i can provide you with EX5000 Fiery if you need . that will be the best solution .
    +91 98609 57551 whatsapp .
  11. Replies
    17
    Views
    12,031

    [Error Code] Re: Resetting 077-909

    please follow the nvm list with machine .

    enter all the nvm chain link with the default values listed in the list .
    to enter the values , you need to login into diagnostics mode of the machine ,...
  12. Replies
    0
    Views
    358

    how to set ESV in any xerox machine

    i have read this ESV (electro static value) of the machine in forum, to set the toner with different machines .

    please acknowledge me how to use or update these settings in any xerox brand machine.
  13. Replies
    2
    Views
    377

    Re: xerox 700 045-360

    primarily power on the machine without all the drum units present in the machine and check if the code appears .

    Generally 045-xxx codes are associated with ros units or flat ros cables, if the...
  14. Replies
    6
    Views
    438

    Re: Problem with Xerox DC252

    you need to blow the developer assembly clean it and then check for any thin marking on the magnetic roller , also rinse the developer with thin mesh to clean all the particals, if the problem is not...
  15. Replies
    5
    Views
    599

    Re: Xerox DC252 fault dfe-000 / 127-337

    generally 127-xxx codes are related with machines and fiery communication , primarily try booting up the machine independently without any fiery attachement , observe the machine, if the machine...
  16. Replies
    10
    Views
    966

    Re: Xerox WC 3655 Green Screen

    please share photo of the ess board with all components attached to it.
  17. Replies
    10
    Views
    966

    Re: Xerox WC 3655 Green Screen

    please try one by one for every componnet on the ess board, remove ram and then p/o , then again remove other componnent, the observe the machines behaviour , you will find the solution then and...
  18. Replies
    6
    Views
    397

    Re: Xerox altalink 8045 glass

    check for the improper belt operation and clean the optics mirror of the scanner carriage , if any contamination found, clean it and apply grease on the carriage slide.
    Make sure all the mirrors...
  19. [Jamming] Re: Xerox 4112 error 071-105 registration sensor on jam (tray 1)

    i have checked both the drawer connector and wirring harness with cable tester , all seems to be good.

    i hope there may be any nvm to override any sensor .
  20. [Jamming] Re: Xerox 4112 error 071-105 registration sensor on jam (tray 1)

    I have service manual , followed it but didn't got any solution . Checked every gear, motor and sensors .all are good , have cleaned the clutch with petrol , but still same result .
  21. [Jamming] Xerox 4112 error 071-105 registration sensor on jam (tray 1)

    I have been facing this problem immitantly , machine was working good , but after power up next day , machine xerox 4112 has started giving error of 071-105 for tray 1, 072-105 for tray 2, and...
  22. Replies
    8
    Views
    570

    Re: Xerox 550 error 077-909.

    Thanks for the solution, it worked , I found the missing nvm list from the machine and that nvm was listed in the list .

    Thanks for the solution .
  23. Replies
    2
    Views
    382

    Re: Xerox workcenter 5020 white lines printout

    Before checking any consumable , primarily check the paper feeding unit and paper for moisture, and also for fuser upper roller for any damage, if all are good , check for grid toner contamination .
  24. Replies
    8
    Views
    570

    Re: Xerox 550 error 077-909.

    i have already replaced fuser exit sensor, iot exit sensor, pre registration sensor.
  25. Replies
    8
    Views
    570

    Re: Xerox 550 error 077-909.

    Primarily there were multiple codes on machine , 124-338, 124-311, 116-320, 045-316, 10-320, 062-380/326, 077-909.

    I have cleared all errors and now stuck on 077-909,
    I have tried NVM reset,...
Results 1 to 25 of 32
Page 1 of 2 1 2