Search:

Type: Posts; User: Gift

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    4
    Views
    582

    Re: C450i Colour Drums

    The differences between the units are mainly the rear cover + charger roller contact and the waster toner auger (differnet length) + nozzle thingy and - if I remember correctly - that "gearish" thing...
  2. Replies
    16
    Views
    949

    Re: Ricoh C2800 - Power, but doesn't turn on...

    It's possible, this series vanished in my field years ago due to it's age so that BICU issue was the last thing I recalled. Of course it's possible that the PSU is bad but it's also possible that...
  3. Thread: MPC4503 SC501-02

    by Gift
    Replies
    1
    Views
    154

    Re: MPC4503 SC501-02

    We had a few bad actuators for paper end detection causing this - they can get broken or bent
  4. Thread: C454e blue spot

    by Gift
    Replies
    5
    Views
    281

    Re: C454e blue spot

    perhaps the dev unit itself or the cooling airflow/filters needs to be checked or replaced
  5. Replies
    16
    Views
    949

    Re: Ricoh C2800 - Power, but doesn't turn on...

    I always repaired them with a large "blop" of solder to bridge the faulty resistor + new polygon mirror motor ;)

    I'd bet nowadays most of these machines are still printing in copier export...
  6. Re: Where to find instructions for SMB Scan and Email Scanning Ricoh IM C3000

    RTFM^^:p:cool:
  7. Replies
    16
    Views
    949

    Re: Ricoh C2800 - Power, but doesn't turn on...

    Take a look at the zero ohm SMD resistors at the BICU pcb near the power supply connector (the white one with the thicker cables).
    As mentioned you can't load any firmware if the machine doesn't do...
  8. Replies
    12
    Views
    636

    Re: Jam (057) on MPC 3004 every time

    Did you swapped just the motors or the entire assy?
  9. Replies
    16
    Views
    949

    Re: Ricoh C2800 - Power, but doesn't turn on...

    I'd bet you'll recognize something on the lcd if you shine a light on it (cellphone flashlight) because the backlight is not on. In case it does show something you can try and unplug the polygon...
  10. Thread: VACUUM FILTERS

    by Gift
    Replies
    13
    Views
    723

    Re: VACUUM FILTERS

    Looks like the offspring from Star Wars "R2D2" and Borderlands "Claptrap" - never seen this model. We used to have nilfisk vacs in our shop but swapped them with ATRIX (that one with the...
  11. Replies
    4
    Views
    253

    [Electrical] Re: Ricoh C2500 auto power down problem.

    SC672 is a communication error between controller and panel, usually comes as a side effect due to other problems.
    Did you re-seated the RAM and try booting the MFP with the HDD unplugged?

    Really...
  12. Replies
    12
    Views
    636

    Re: Jam (057) on MPC 3004 every time

    Well then I'd probably go for the fuser drive assy even if that won't explain the skewing.

    Once I had a weird noise from the transfer roller assy (the real one^^) - there's a discharge metal plate...
  13. Replies
    12
    Views
    636

    Re: Jam (057) on MPC 3004 every time

    Might be the combined fuser/paper exit drive assy, I think it contains a torque limiter and one way clutch gear that can become faulty. Also check if all junction gates are moving freely / aren't...
  14. Replies
    4
    Views
    253

    [Electrical] Re: Ricoh C2500 auto power down problem.

    He says MPC2500. I recall that a faulty polygon motor can blow zero ohm resistors/fuses on the BICU but the symptoms were different (something like no LCD backlight).

    Does it boot with an open...
  15. Replies
    21
    Views
    889

    Re: mpc3002 scan to folder - cable versus wifi

    Indeed, hostname is very suitable if you encouter a full DHCP enviroment.
  16. [Electrical] Re: MP 3352 Missing text/blank line on scanned document

    Perhaps there's something wrong with the DF contact glass - you can try and tun it upside down or around 180 degree and see if the image error changes. If not I'd remove the CCD cover and give that...
  17. Re: What do we reckon to Konica AccurioPrint C759 - needed for my Print Shop

    Nothing real fancy but there's a certain risk that the battery fails over time and this might lead to something between a fixable data corruption up to faulty SSD/controller boards. It's not like it...
  18. Thread: C227

    by Gift
    Replies
    2
    Views
    211

    Re: C227

    Haven't tried but afaik recent KM more stuff is interchangeable between the brands compared to the situation many years ago. Worst case is that you might have to swap the chip from the old unit and...
  19. Thread: missing icons...

    by Gift
    Replies
    9
    Views
    457

    Re: missing icons...

    You might start and update the FW with the latest package, it does also contain the SOP/android FW. It's also possible to reset the SOP in it's service mode. Still this might not be a FW or complex...
  20. Replies
    10
    Views
    448

    Re: Sc 66x occurs - sp mode displayed in japanese

    Usually I'd say marketing area/region isn't set right in SP - make shure to compare and adjust the values from the birth certificate - it might be the SP mentioned by Debs. Once you're at it: Please...
  21. Thread: missing icons...

    by Gift
    Replies
    9
    Views
    457

    Re: missing icons...

    Didn't knew it's possible to delete the widgets entirely - perhaps within the android SP mode but not from user/admin side. Perhaps you just have to log in as administrator first in order to...
  22. Re: What do we reckon to Konica AccurioPrint C759 - needed for my Print Shop

    That's really not a lot - I'd probably go with a C454e/C554e - drums on that series do last longer in average thanks to good old charge corona (vs charge roller in newer KM MFPs) and you can trick BK...
  23. Replies
    21
    Views
    889

    Re: mpc3002 scan to folder - cable versus wifi

    Easiest solution is (usually) just to re-configure the new ISP routers IP fitting to the existing enviroment. Just take care that you also take a look at the DHCP config and (if you need DHCP) define...
  24. Replies
    21
    Views
    889

    Re: mpc3002 scan to folder - cable versus wifi

    Yes but what about wireless? As I understand there is a scenario with both wireless / wired networked computers. If for some reason the admin decides not run this in the same network you might end up...
  25. Replies
    21
    Views
    889

    Re: mpc3002 scan to folder - cable versus wifi

    Ah OK - as already suggested, is it possible to acces the WIM from Wlan computers? Next question: Is that Wlan network within the same IP adress range or is it possible you have to enter a gateway...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4