Search:

Type: Posts; User: mga

Page 1 of 20 1 2 3 4

Search: Search took 0.03 seconds.

  1. Replies
    14
    Views
    423

    Re: MPC306 Touch panel calibration

    Mpc2004 to 6004 smart panel parts from tdc not in machine parts has its own manual
  2. Replies
    14
    Views
    423

    Re: MPC306 Touch panel calibration

    The touch screen will away be available if not in parts manual check for lasted on my ricoh don't forget tdc2 only gets updated with new patch and the latest manual may not be on there
  3. Replies
    18
    Views
    520

    [Error Code] Re: MP C6501 HDD Replacement

    Agreed also once in machine will need format in service mode also stamp from rom
  4. Replies
    6
    Views
    264

    Re: MP C307 has blank screen

    Here you go
  5. Replies
    14
    Views
    423

    Re: MPC306 Touch panel calibration

    Hope this help
  6. Thread: C5100Pro

    by mga
    Replies
    4
    Views
    145

    Re: C5100Pro

    Looks like the new belt wasn't installed correctly ie cleaning the unit before the belt was installed best to get ricoh credited service engineer to do
  7. Replies
    12
    Views
    590

    Re: Rfu file needet for Mp6000

    If you require I could pm it to you
  8. Replies
    5
    Views
    248

    [Misc] Re: ricoh sop authentication

    Hope this helps
  9. Thread: Light Copy mp6500

    by mga
    Replies
    12
    Views
    421

    Re: Light Copy mp6500

    Come on no way there no way the new ricoh Mono series are as good as the martini as for the mpc6004 great machine but colour

    The martini engine has been about for years and still going as a new...
  10. Thread: banding ricoh 5100

    by mga
    Replies
    16
    Views
    536

    Re: banding ricoh 5100

    Sorry my mistake I see more 52xx series forgot not on 51xx series
  11. Thread: sc 544-002 mpc4503

    by mga
    Replies
    33
    Views
    24,380

    Re: sc 544-002 mpc4503

    No it will not reset without a fuse
  12. Re: toner End" alert message does not clear in mpc2011

    Could be wrong but I can't see that the bottle chip could be written on from the copier
  13. Replies
    14
    Views
    423

    Re: MPC306 Touch panel calibration

    Hope this helps
  14. Replies
    6
    Views
    264

    Re: MP C307 has blank screen

    +1
  15. Re: toner End" alert message does not clear in mpc2011

    Never had to do any of that when having this problem always hopper and dev assy replaced together and cleaning pipe in machine
  16. Replies
    2
    Views
    163

    [Jamming] Re: IR Adv 4051 Paper jam in duplex guide

    Problem could be delivery section sensor actuator comes out of place
  17. Replies
    11
    Views
    580

    [Misc] Re: Canon ir5050 vertical black stripe on edge

    This is a skew problem check side guide and DF unit is not skew on machine and check hinges.

    There is a skew adjustment for the df
  18. Thread: Light Copy mp6500

    by mga
    Replies
    12
    Views
    421

    Re: Light Copy mp6500

    This series {martini} is the best machine ricoh has ever made.
    Being a older model you may need new Dev assy if you haven't give dev assy good clean including mag roller redev with oem dev and setup...
  19. Thread: banding ricoh 5100

    by mga
    Replies
    16
    Views
    536

    Re: banding ricoh 5100

    Same same lines in all colours I would check ptr assy and wax bar in there
  20. Re: toner End" alert message does not clear in mpc2011

    Above pcdu the a black plastic assy goes from hopper to pcdu remove and clean and check hopper is OK may need to replace with new oem hopper and dev assy quite common
  21. Replies
    13
    Views
    449

    Re: mp c4503 white dots

    Would be good to see some more samples of other colour and some normal prints I've had something similar when a engineer fitted a 04 ptr in a 03
  22. Replies
    18
    Views
    588

    Re: Automatic firmware update

    5816 209Then off and on
    To clear @ remote
  23. Replies
    18
    Views
    588

    Re: Automatic firmware update

    It sometimes does take a very long time I still just download latest package no need to extract then sd card perfect
  24. Replies
    27
    Views
    1,399

    [Misc] Re: Ricoh handy goose guide

    Just call ricoh support if you on there system they will email you the latest copy
  25. Re: My customer dropped a bomb on me...Purchased a C5200s and wants me to service it!

    Very generous
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4