Search:

Type: Posts; User: blackcat4866

Page 1 of 20 1 2 3 4

Search: Search took 0.23 seconds.

  1. Re: What Is Best Brand Thumb Drive for Firmware Upgrades

    LOL! I usually lose them to the washing machine or leaving them in customer machines.

    Since I stated putting them on a bright neon green lanyard, I hardly ever lose them. =^..^=
  2. Replies
    5
    Views
    121

    [Misc] Re: C3350i and marketplace

    I've removed Marketplace from plenty of those C3350i series. We have a customer that runs PaperCut that insists that it interferes with the PaperCut installation. I've become fairly adept at removing...
  3. Re: TA-3551ci/Slow printing large jobs - color only.

    You know, I wish these things were actually taught, instead of stumbled across bit-by-bit. That's the geat thing about Copytechnet.

    Thanks to PrintWhisperer & Samanator for filling in another gap...
  4. Replies
    7
    Views
    151

    Re: C1060L Fuser Lamp

    I agree. The 3W difference should be insignificant. =^..^=
  5. Replies
    3
    Views
    97

    [Misc] Re: C3070 Fusing Swing Unit

    All that I can suggest to you is to carefully scribe & mark each of the slotted adjustments and attempt to reposition the new part in the exact same place. I'm assuming it's the alignment of the...
  6. Replies
    7
    Views
    151

    Re: C1060L Fuser Lamp

    Are there any wattage markings on either?

    You should be able to take the lamp assy and the holder brackets (as long as the connectors fit).
  7. Replies
    3
    Views
    97

    [Misc] Re: C3070 Fusing Swing Unit

    According to the manual there are factory adjustments to the fuser swing unit that cannot be duplicated in the field. Why do you need to change it?
  8. Replies
    7
    Views
    151

    Re: C1060L Fuser Lamp

    The numbers are similar ... not the same. You probably will not do any harm, but it may give you fuser codes if it doesn't warm up fast enough or if it can't maintain temperature.

    Here's an...
  9. [Misc] Re: Replacing 302K302170 (FRAME REAR UPPER) on 3011i

    I've had a number of scanners off. As long as you leave the scanner internal parts alone, there aren't any critical adjustments.

    In broad strokes;
    Remove the DF
    Remove all the covers
    Disconnect...
  10. Replies
    13
    Views
    722

    Re: DV-610 in C1060 series.

    Just to include some useful details:

    DV-614C has 630gms of developer mix only, 7.5gms for the bag only.
    DV-610C has 1100gms
    =^..^=
  11. Replies
    4
    Views
    177

    Re: e 2550c magenta issue

    Once you provide the sample I can comment.

    I have concerns though, when you swap in used components of unknown provenance, without doing calibrations, and expect something to be fixed. =^..^=
  12. [Misc] Re: Replacing 302K302170 (FRAME REAR UPPER) on 3011i

    This? Number 6:

    54736

    By all appearances you'd have to fully remove the scanner to access the inside of the rear frame. I can't say that I've ever tried to get to that part.

    If you don't...
  13. Re: C1060 with toner pile-up on the 2nd Transfer Unit

    You lost me about half way through.

    If it was the laser causing this issue by writing that band of image (on digital devices the laser writes the text/image, NOT the white areas), the laser would...
  14. Replies
    5
    Views
    259

    Re: taskalfa 3501i

    hmmm, do you have any samples?
  15. Re: What Is Best Brand Thumb Drive for Firmware Upgrades

    That's been my rule: Use the smallest drive that will still hold the firmware.

    Also remember that copier technology is often 7 years behind the times, so many of your machines are USB2 ... not...
  16. Re: TA-3551ci/Slow printing large jobs - color only.

    Older machines, like the VoyagerE, FalconIII and Stratos would not talk to a SSD. That may have changed since then.

    So you don't know what the workaround was? =^..^=
  17. Replies
    1
    Views
    103

    Re: 3040C non oem toner

    I've never had generic toner of the right kind do that ... but I once had a customer bust open some Samsung AIO toner cartridges, and refill their eS655 bottle with mono-component toner. I can laugh...
  18. Replies
    5
    Views
    259

    Re: taskalfa 3501i

    samples?
  19. Replies
    14
    Views
    1,841

    Re: A4 drums DK-5140

    Definitely YES.

    Set your energy save settings to 5 minutes or less, or even better: Silent Mode.

    It's the only real long term solution. =^..^=
  20. [Error Code] Re: Toshiba e-Studio2550c F520 Error / Firmware

    Are you sure they are the correct firmware files?

    The majority of the time, if firmware does not work for me, it's because they are the wrong firmware files, or no files at all, LOL. =^..^=
  21. Re: TA-3551ci/Slow printing large jobs - color only.

    Kyocera has a utility call "Deleter". It removes all related print driver files, so you can start from scratch with a clean install.

    First though, I would connect my laptop, and ping back to a...
  22. [Error Code] Re: Toshiba e-Studio2550c F520 Error / Firmware

    Did you extract the firmware before copying it to the USB stick?

    The USB stick should be formatted FAT32.
    The single firmware file comes to you compressed (.zip file extension), and must be...
  23. Replies
    7
    Views
    219

    Re: Mercado de criptomonedas

    Yes, my subscriptions restarted some time around 1600 Monday. They had been gone for a while.

    There are at least 3 or 4 of us that are mostly retired, that could be (are) around here much more...
  24. Replies
    1
    Views
    109

    Re: Flashback Monday

    Early on in the COVID, one of my customers had a large barcode posted, visible on the inside of the front door. According to the sign, I'm supposed scan the barcode, upload some software to my phone,...
  25. Re: Kyocera CS 8002i Exit/Switchback Unit

    This MacGuyver outlasts a new actuator:

    54700

    =^..^=
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4