Search:

Type: Posts; User: charm5496

Page 1 of 20 1 2 3 4

Search: Search took 0.03 seconds; generated 49 minute(s) ago.

  1. Re: Canon IR Advance washed out copies on 1 side when duplexing

    What is the condition of your transfer roller? Also take a look at the attached screenshot. It describes a similar issue to yours.
  2. Replies
    2
    Views
    296

    [Jamming] Re: ImagePress C700 C800

    Is this a new setup? There are guide plates that need to be moved depending on the model. This is detailed in the setup instructions.
  3. Replies
    8
    Views
    421

    Re: canon ir c5250

    There's a ground tab under the drum on the frame. Make sure it is making solid contact with the drum assembly.
  4. Re: Black copy printing out from platten glass but printing is good in canon it 105

    If lamp is good, then your next item is the CCD unit. Was any work performed on the machine prior to this issue?
  5. Replies
    2
    Views
    603

    Re: Canon IR adv DX 3725

    Push the [123] in the lower right hand corner, then *, then 2, then 8, then *
  6. Re: Black copy printing out from platten glass but printing is good in canon it 105

    Is your scan lamp turning on when you lift the feeder or make a copy?
  7. Re: FIRMWARE FOR CANON IMAGE RUNNER ADVANCE DX 4745i

    Nope, as long as you have the device connected to the customers network and they are not blocking any ports you will be able to update to the latest firmware via the downloader from the menu when you...
  8. Replies
    2
    Views
    322

    Re: Stylus on Canon IR ADV DX 5700 series?

    Just use the rubber tip stylus pens.
  9. Replies
    4
    Views
    369

    [Misc] Re: Canon IRC 3220 HDD replace

    You are going to need a canon compatible HDD, Canon SST and firmware for the machine loaded on a laptop. Once finished, you will have to reconfigure your device for use with the imagepass and any...
  10. Re: FIRMWARE FOR CANON IMAGE RUNNER ADVANCE DX 4745i

    Just connect it to the customer network and download the firmware directly onto the machine through the CDS on the control panel.
  11. Replies
    14
    Views
    929

    Re: Colortrac SmartLF Ci 40

    These units operate well and are pretty solid. Like cat stated already, just clean the scanner and the white reference roller, make sure the customer hasnt inadvertently messed with scanning presets...
  12. Thread: Firmware

    by charm5496
    Replies
    7
    Views
    550

    Re: Firmware

    No they did not, and you are horribly wrong. The base model machine had to have the PDL KIT-A2 installed and it came with N boot rom and the NIC port.
    It wasn't until the 'I' version was released...
  13. Thread: Firmware

    by charm5496
    Replies
    7
    Views
    550

    Re: Firmware

    That was an option on the 5000 series, and even then it was a 50/50 shot of it working properly. Then you had to know if the boot rom was a N, C or an I version before loading as well. The older...
  14. Thread: Firmware

    by charm5496
    Replies
    7
    Views
    550

    Re: Firmware

    Unless you have the old canon USB to parallel cable, you are going to have a hard time installing this firmware.
  15. Replies
    5,481
    Views
    7,222,401

    Re: Just how Crazy is Donald Trump!

    Not really, I have had 14 close friends and co-workers all come down with covid. None of them were hospitalized, two were prescribed remdesivir for a week, and one was given a steroid because he had...
  16. Replies
    5,481
    Views
    7,222,401

    Re: Just how Crazy is Donald Trump!

    The number of views is not a way to measure the usefulness of anything, this is why the Democrats keep missing the mark as to what the American people actually want and need.
  17. Replies
    5
    Views
    466

    Re: Canon DADF H1

    I had a broken actuator on one of these H1 doc feeders right after the covid shutdown, part was NLA, so I pulled the broken pieces out and had my kid scan them and make one on the 3D printer. Worked...
  18. Replies
    5,481
    Views
    7,222,401

    Re: Just how Crazy is Donald Trump!

    So he will be just like Biden, what's your point. We get it, you don't like Trump, do you honestly think anyone that has opened this thread and changed their mind about who they will vote for? Highly...
  19. Replies
    736
    Views
    237,011

    Re: Canon service support tool

    You do not need SST to load firmware on a 1023. It comes with it's own tool and use a USB cable. You may want to purchase a service manual.
  20. Replies
    15
    Views
    1,745

    Re: Startup Problem C5035i IR Advance

    When you swapped the boards around, did you move the counter PCB's? All those small boards need to stay with the original machines. That is why you now have an E246 code.
  21. Re: Canon IPF750 - head replaced, head cleaning gives 03800500-2F42

    I would look at the purge unit and/or the carriage unit. Looks like you have a lack of air suction. Check your tubes for air pockets in them
  22. Replies
    10
    Views
    1,132

    Re: Latest L Printer Service Tool

    Did a quick search and this issue has several hits on the tech support site. Issues with the ribbon cable, power supply, main controller, carriage units and print heads. Happy troubleshooting
  23. Replies
    10
    Views
    1,132

    Re: Latest L Printer Service Tool

    Doesn't the top cover have a switch and sensor system to manage its open/close status on this model?
    If so, you might be missing part of the system.
  24. Replies
    4
    Views
    450

    Re: Blank Display

    Reseat RAM and connectors on the main controller. If no help I would recommend replacing the main controller.
  25. Replies
    5
    Views
    594

    Re: Canon IR C5045 cannot print anymore

    When you access the fiery interface from the copier control panel, do you a screen that says idle, or does it say "wait a moment"
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4