Search:

Type: Posts; User: copiertec

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    20
    Views
    575

    Re: MX-4070 fax issue

    Thank you, PC, I was thinking the same thing this weekend, line noise or voltage. I was also thinking about unplugging that fax server and see what happens as well. Thanks for the tip, I will make...
  2. Replies
    20
    Views
    575

    Re: MX-4070 fax issue

    I stayed at the clients office for a few after posting. All the faxes are going though okay now. But, here is the issue when it is receiving a fax... when you go into folders address book on the...
  3. Replies
    20
    Views
    575

    Re: MX-4070 fax issue

    That may be my next discussion with the client, if the fax ss adjustments do not work. I almost already know what the client is going to ask, "why did it work with the old machine and not the new...
  4. Replies
    20
    Views
    575

    Re: MX-4070 fax issue

    Thank you, I was just looking at the fax service manual...that damn thing is a rabbit hole with all the different settings.
  5. Replies
    11
    Views
    198

    [Misc] Re: Epson WF-2630

    Have you run them though the cleaning cycle several times?
  6. Replies
    7
    Views
    228

    Re: Sharp MX 4141 Network Time out error

    PM me
  7. Replies
    20
    Views
    575

    Re: MX-4070 fax issue

    Thank you, mojorolla, yes, I did make sure the cord is only a two line cord, but I did not check the cord going into their "fax finder" box/switch, I thought about that and am going back to check it....
  8. Replies
    20
    Views
    575

    Re: MX-4070 fax issue

    Yes, set to auto receive.
  9. Replies
    20
    Views
    575

    Re: MX-4070 fax issue

    Yes, I did check that option.
  10. Replies
    7
    Views
    228

    Re: Sharp MX 4141 Network Time out error

    latest version which allows TLS 1.2 is 400R2C0B
  11. Replies
    20
    Views
    575

    Re: MX-4070 fax issue

    I went back out this morning, the line was acting like the ringer had been off the hook for a while as it was making that loud beeping noise. I went up to their server room and reset their Multitech...
  12. Replies
    7
    Views
    228

    Re: Sharp MX 4141 Network Time out error

    What is the firmware version?
  13. Replies
    20
    Views
    575

    Re: MX-4070 fax issue

    My thoughts as well, Phil. I just want to make sure all my bases are covered first.
  14. Replies
    20
    Views
    575

    Re: MX-4070 fax issue

    Thanks, Phil. Yes I did compare the settings and they are the same as the the 3100n. I tried turning off ECM, but with the same results of the copier acting like it was receiving.
    They are a...
  15. Replies
    20
    Views
    575

    MX-4070 fax issue

    We just installed a MX-4070N that replaced an MX-3100n. The client had the MX-3100N receive the fax, then it goes to an email and we had no issues. We installed the MX-4070N and the machine receives...
  16. Re: MX-C401 APPD1 N jams on 8x14 when duplexing only

    Wow!! I haven't set eyes on that in years! The loading guides that would break on the paper trays and you had to cram paper under it until you could order a new one, FEED TAPE the feed tires because...
  17. Re: MX-C401 APPD1 N jams on 8x14 when duplexing only

    Wow, your bringing back some memories, mloudy! The machine that would clam shell in two different ways! What a pile of garbage, remember the registration clutch that would break from the molding...
  18. Replies
    4,732
    Views
    299,970

    Re: Latest on the Corona Virus

    In the pdf from the cdc, it states it's "unapproved," what exactly does that mean? Unapproved by who?
  19. Replies
    4,732
    Views
    299,970

    Re: Latest on the Corona Virus

    I have a few of questions about the injection...Just questions about the information provided to me by the cdc, that's it. 1) what does unapproved mean in the highlighted sentences 2) the word "may"...
  20. Re: MX-C401 APPD1 N jams on 8x14 when duplexing only

    Thanks, Dcopyman. I pulled out the delivery section in pieces (not the entire unit), cut the jam sensor wire ties just to make sure they were not to tight, cleaned all the paper path rollers in that...
  21. Re: Aries 2 (40 series) and Mac 11.01 compatibility?

    I even looked at the Phoenix 2 (51/71) series and they do not have drivers for the 11.01 Mac. Quick question, on a Mac 10.14.6 does the Mac need Firefox and/or Adobe in order to print with account...
  22. Aries 2 (40 series) and Mac 11.01 compatibility?

    Are the Aries 2 machines Mac 11.01 compatible? I do not see any drivers on the downloads page?
  23. Re: MX-C401 APPD1 N jams on 8x14 when duplexing only

    Thanks for the help, Sam. I was able to make it back to the client, today. I first removed the finisher and it ran double sided 8x14 with no issues, I swapped out the finisher, jammed on duplex,...
  24. Replies
    88
    Views
    4,355

    Re: Anyone into Cryto currency?

    Bitcoin (BTC): $200 billion wiped off cryptocurrency market

    Good buy time?
  25. Replies
    24
    Views
    1,513

    Re: Thoughts on MX-4070 series??

    I appreciate the input. The reason I am asking is because we have a client with about 6 MX-M503N's and two of them have just surpassed 1mil. So I would normally swap them over to a new Sharp just for...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4