Search:

Type: Posts; User: kosmpryw

Search: Search took 0.01 seconds.

  1. Re: Samsung SL-X4300LX - doesn`t print, no errors, led still blue

    Problem solved, thanks to user rrrohan

    It turns out that reloading newest firmware done the trick, all printers are working now.

    Many thanks to all of You!
  2. Re: Samsung SL-X4300LX - doesn`t print, no errors, led still blue

    Ive captured dumpsys logs from service menu but I`m unable to upload it here as it exceed maximum capacity for attachement.
    Also I dont know what to look for in it.....
  3. Re: Samsung SL-X4300LX - doesn`t print, no errors, led still blue

    Ive attached how job details looks like
  4. Re: Samsung SL-X4300LX - doesn`t print, no errors, led still blue

    Just to mention - I`ve took whole fuser door from working unit and fitted it in non-working unit and it didn`t helped.
  5. Re: Samsung SL-X4300LX - doesn`t print, no errors, led still blue

    No, it didn`t print anything at all, no reports were printed - when I choose to print it looks ok, I didnt get any fault/warning message but nothing was printed. All reports which I`ve tried to print...
  6. Re: Samsung SL-X4300LX - doesn`t print, no errors, led still blue

    In thread about other Samsung printer which behave like mine Ive found post:

    https://www.copytechnet.com/forums/samsung/38745-held-post358700.html#post358700

    which says:



    The Fuser Door...
  7. Re: Samsung SL-X4300LX - doesn`t print, no errors, led still blue

    OK, I`ve found out that message is not the case. Some of my printers does have that message but they`re printing and also some which are not printing doesn`t have it.
  8. Re: Samsung SL-X4300LX - doesn`t print, no errors, led still blue

    Done that - didn`t help... I have only one version of firmware for that model: EV11.01.09.16_FS14.03.06.02.13 and I have used it in few ours printers with success but in this particular case - no...
  9. Re: Samsung SL-X4300LX - doesn`t print, no errors, led still blue

    One more thing - I don`t know if it`s important or not...
    When I`m pressing on/off button (the one on the screen) on other working printers it gaves message about shutting down etc. On these...
  10. Re: Samsung SL-X4300LX - doesn`t print, no errors, led still blue

    Thanks for pointing me to right directions, so here is more data:

    1. idle printer have no warnings or errors
    2. yes, I`ve tried with or without LAN cable connected - nothing changed
    3. no, I`m...
  11. Samsung SL-X4300LX - doesn`t print, no errors, led still blue

    Hi there

    I have strange situation here. I`m unable to print, when I choose to print (or copy) still blue led blinks once and then goes to still blue again. No errors or warnings, I`ve checked...
  12. Samsung SL-X4300LX - replace old imagining unit with used one

    Hi,

    Samsung SL-X4300LX

    I have few working and few faulty x4300lx printers. Is it possible to swap imagining units between them? Few working have 0% remaing life of imaginig unit and few faulty...
  13. Replies
    68
    Views
    23,909

    Re: Need HDD image files for a SL-X4300LX

    Just want to say again - THANK YOU. You helped me a lot, I appreciate it.
    PS. I`ve made some test on 30x SL-X4300LX printers and it seems that HDDs larger than 320GB also are allowed to be used as...
  14. Replies
    68
    Views
    23,909

    Re: Need HDD image files for a SL-X4300LX

    Sorry, I don`t know why but I can`t send you my email by PM. Please send files to: ko****w@gmail.com
  15. Replies
    68
    Views
    23,909

    Re: Need HDD image files for a SL-X4300LX

    email sent via PM. Thanks in advance!
  16. Replies
    68
    Views
    23,909

    Re: Need HDD image files for a SL-X4300LX

    It would be great if someone could help me to find files needed to recover new HDD on my Samsung SL-X4300LX printer? recently HDD on my printer become faulty and I found very difficult to find needed...
Results 1 to 16 of 16