Search:

Type: Posts; User: slimslob

Page 1 of 20 1 2 3 4

Search: Search took 0.57 seconds; generated 47 minute(s) ago.

  1. Re: Lanier MP CW2200 not printing from brand new Windows 10 Pro 64 bit PC's

    According to the Product Support Guide the supported print drivers are Adobe PostScript3 and HDI (Heidi Device Interface) for AutoCAD. Only other print option is Print from USB/SD, JPEG/TIFF/PDF.
    ...
  2. Re: Lanier MP CW2200 not printing from brand new Windows 10 Pro 64 bit PC's

    I would advise that you double check that some type of user authentication is not implemented. The data light flashing and then no print is the classic symptom of an authentication violation. Syntax...
  3. Replies
    9
    Views
    1,047

    [Misc] Re: Ricoh MP C3002 paper problem

    This thread is from over a year ago and therefore considered dead and buried. Start a new thread with full details of the problem grave digger.
  4. Replies
    5
    Views
    195

    Re: Print to C5110s with E-22B Fiery

    As long as the fiery is present and all the SP changes made when it was first installed, the fiery is the Printer Option. As this is a Production machine you will need to have in your possession at...
  5. Replies
    2,341
    Views
    1,580,974

    Re: Just how Crazy is Donald Trump!

    Tick tock for the Democrat Party. A number of them from battleground states are considering crossing the aisle because of Schiff's antics. They are hoping to be able to keep their seats on election...
  6. Replies
    6
    Views
    242

    Re: ricoh MP c3002 fuser question

    Seeing as how you are a senior tech, probably similar to how I know.
  7. Replies
    6
    Views
    242

    Re: ricoh MP c3002 fuser question

    Believe me you do not want to even try to disassemble a sleeve unit and put it back together.
  8. Replies
    6
    Views
    1,669

    Re: Pro c651 toner cartridges problem

    Thus is a three year old thread. It was dead and buried. Start a new one grave robber.
  9. Re: Ricoh MP7502, adf jams only when sending fax ????

    Clean the black reference for the skew correction sensor. Use a can of compressed air.
  10. Replies
    10
    Views
    487

    Re: MPC307 scanner skew . .

    You say that it is a new machine. Did the skew problem appear upon initial testing in your office or after delivering it to your customer? If during initial testing it is an out of box failure and...
  11. Replies
    10
    Views
    487

    Re: MPC307 scanner skew . .

    When you print a counter sheet is it skewed?
  12. Replies
    1
    Views
    187

    Re: Mpc 6501 E-7200 30x60 Paper

    Replace the toner belching monster with something newer. Preferably a true Production Machine.
  13. Replies
    10
    Views
    367

    [Misc] Re: Ricoh color test pattern not aligned

    Not color calibration, that is for image density. Color registration, User Tools version of SP 2111. Does both rough and fine automatically.
  14. Replies
    6
    Views
    409

    [Misc] Re: MP C6501 Toner from each PCU

    Here is one of the bulletins showing the toner scattering. Development Unit trough area is where the toner is probably dropping from.
  15. Replies
    6
    Views
    409

    [Misc] Re: MP C6501 Toner from each PCU

    The MP C6501 is famous for being a toner belching beast. Follow the service manual to remove the PCDU and separate the drum unit from the development unit. You will most likely find toner...
  16. Replies
    4
    Views
    164

    Re: MP c5504 No USB

    In older models that did not have the SOP you had to install the USB2.0/SD Card Slot option. Part of that was change Scanner SP1013-001 from "0" to "1" and/or Printer SP1110-001 from "0" to "1". With...
  17. Replies
    10
    Views
    367

    [Misc] Re: Ricoh color test pattern not aligned

    If you are an end user try running Auto Color Alignment in User Tools - Maintenance. If ACA in User Tools or Auto Line Position in SP ends in an error and does not alignment or the problems returns,...
  18. Replies
    4,455
    Views
    755,208

    [Funny] Re: Joke of the Day

    Adam Schiff walks into a bar carrying a duck under his arm, and the bartender says, 'hey, you can't bring your cockroach in here.' And Schiff says, 'this is not a cockroach, it's a duck, you...
  19. Replies
    4
    Views
    297

    Re: Google mesh network and non wireless MFP

    A WIFI range extender with a wired port works nicely. Netgear N300 WiFi Range Extender Model EX2700 works nicely and be found at numerous places for less than $50.

    In fact a mesh network is...
  20. Replies
    2
    Views
    149

    Re: Automating address book backups

    If you have not made any changes to the address book you do not need to make another backup. I always trained my customers to make address book changes through WIM. Then while still in WIM make a...
  21. Replies
    6
    Views
    164

    Re: 5210 ADF Adjustment

    ADF adjustments can be a bitch. They can be even worse if you do not adjust from the platen glass first.
  22. Replies
    3
    Views
    162

    [Jamming] Re: Ricoh mp c4504 jamming

    Jam J067 logged in SP 7504-67 is a duplex entrance trail edge jam. More than likely the feeler, PN D2024673 is binding and not releasing at the end of the paper.

    If you meant SP 7504-100 then that...
  23. Replies
    4
    Views
    309

    [Error Code] Re: Ricoh 5100 pro codes

    You might be getting a build up of waste toner and lubricant dust on top of the cleaning blade.
  24. Thread: Error E000355

    by slimslob
    Replies
    1
    Views
    125

    Re: Error E000355

    You will get more replies if you post in the actual Canon Technical Forum.

    https://www.copytechnet.com/forums/canon/
  25. Replies
    7
    Views
    347

    Re: MAC 10.15 scanning to SMB

    Upgrading to OSx 10.15 may disabled or removed SMBX, the SMB implementation used by Apple.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4