Search:

Type: Posts; User: tonerhead

Page 1 of 9 1 2 3 4

Search: Search took 0.02 seconds.

  1. Re: Kyocera M3540idn replace waste toner container message will not go away

    Look at the picture. You should be able to clean led with qtip. It's right there when you open door. The transmitter looks to receiver front to rear at top of bottle. By looking in with the...
  2. Re: Kyocera M3540idn replace waste toner container message will not go away

    I am going by memory on this since I haven't worked for a kyo dealer for a year now. It is likely the photo interrupt that looks through the top of the waste container. If memory serves, I had...
  3. Replies
    18
    Views
    608

    [Error Code] Re: MP C6501 HDD Replacement

    Here is the poop as I understand it. The 2 hdd's are in a striping array. Striping increases the r/w speed of data transfer, plus increases the total storage. The 2 hdd's need to be the same...
  4. Re: MP C2003 Can scan to WIN 10 Home but not WIN 10 Pro

    One last detail to check. The network the pc connects to is listed as a private, not a public. This has rectified lots of scan to folder issues for me. Then for testing purposes, disable firewall...
  5. Replies
    13
    Views
    466

    Re: mp c4503 white dots

    Since there is no problem listing parts, the current number in parts finder is D0BQ6060. That is D,zero,B,Q,6,zero,6,zero. It probably updates the previous mentioned number. I also thought of...
  6. Replies
    236
    Views
    8,281

    Re: Need some advice on learning networking

    I haven't read every post in this thread so forgive me if already given as a solution. If you want to learn networking try Udemy. Registration is free. They usually list their courses at a high...
  7. Replies
    13
    Views
    466

    Re: mp c4503 white dots

    Seen that before on ITB. As mentioned it is the black primary charge on itb. Part number is in the partsfinder for the machine. Don't know if proper to list part number on forum, but I did check...
  8. Replies
    11
    Views
    1,156

    Re: Ricoh scanning smbv3 woes

    Username only. On the Kyocera it worked with username only. It is probably worth trying though. Thanks. I don't think it will help as their IT is saying username/password is not encrypted from...
  9. Replies
    11
    Views
    1,156

    Re: Ricoh scanning smbv3 woes

    It should work especially if a 171 works. The college is saying it is sending username/password in cleartext. Server will not allow that. I have always thought SMB went as follows. SMB1 wide...
  10. Replies
    11
    Views
    1,156

    Re: Ricoh scanning smbv3 woes

    Well we lost this round, they are going with another Kyocera. The entire campus is scan to email right now which is working fine on the Ricohs. However if more departments decide to scan to folder...
  11. Replies
    11
    Views
    1,156

    Re: Ricoh scanning smbv3 woes

    Yes, port 445
  12. Replies
    11
    Views
    1,156

    Re: Ricoh scanning smbv3 woes

    Domain name is entered into network settings. Thanks for reply.
  13. Replies
    11
    Views
    1,156

    Ricoh scanning smbv3 woes

    I know how to set up scan to folder and everything, been doing it forever. I do have one case right now that is a stumper. It is at a university. Very tight security. They are in process of...
  14. Replies
    33
    Views
    1,457

    Re: printing on envelopes via bypass

    This is true, hope things go better for all you got going on in your world.
  15. Replies
    2
    Views
    221

    Re: Canon D1320 light along one edge

    Not really an expert on this model, I will say drum is rated 24k and images probably will get lighter as drum ages. Have worked on similar canons. When charge roller gets dirty, image gets lighter...
  16. Replies
    33
    Views
    1,457

    Re: printing on envelopes via bypass

    For being a deacon, you must have had a bad day. Please watch the language. :rolleyes:
  17. Replies
    10
    Views
    783

    [Misc] Re: mpc2003 scan to folder issue

    One final thought. If smb1 is enabled, remember that is port 139 instead of 445.
  18. Replies
    10
    Views
    783

    [Misc] Re: mpc2003 scan to folder issue

    Another thought is to check timezone, time, and daylight savings time settings on copier and pc's. SMB scanning may fail if not in same time zone and if time is over 2 hours difference between the...
  19. Replies
    10
    Views
    783

    [Misc] Re: mpc2003 scan to folder issue

    Another thing to check is network settings. Many pc's just connect as a "public" network because the operator doesn't tell it otherwise. Change network settings to a "private" network if necessary....
  20. Replies
    14
    Views
    1,104

    03/04 drum rebuild kits

    Many vendors offer rebuild kits for these. I heard rumor Ricoh is also planning to do it. Has anyone heard about it?
  21. Replies
    8
    Views
    444

    [Misc] Re: Mpc 4503 with finisher SR3140

    Since the first and second finisher work perfect on another 4503, it has to be the 4503 with the complaint that is the issue. I had similar once. It turned out to be environmental. The machine...
  22. Replies
    13
    Views
    828

    [Misc] Re: Problem with my copier

    Just turn your radio up higher so you can't hear it:cool:
  23. Re: Those $#%@#% foam rollers on ricoh finishers.

    I guess my frustration is every other finisher has a different style hub. It wouldn't be so bad if they all used the same. Plus it always seems that I lose the white keeper while changing. Boss...
  24. Replies
    7
    Views
    644

    Re: Ricoh MP C6503 SM?

    Fuser is fritten nightmare. First time will take most of day and you will worry if it will work after completed. We had a tech who got pretty good at it and he did them all.
  25. Those $#%@#% foam rollers on ricoh finishers.

    Has anyone ever found a rubber roller that fits the hub of the foam gathering rollers? They wear down much too quickly.
Results 1 to 25 of 214
Page 1 of 9 1 2 3 4