Search:

Type: Posts; User: copier tech

Page 1 of 20 1 2 3 4

Search: Search took 0.10 seconds.

  1. Re: Bizhub C258 artefacts, strange lines on printouts

    I assume before you replaced all these boards you did swap the black IU & transfer units first or at least remove & look to see it the blades are cleaning?
  2. Re: Ir adv 8295 with error limited functios& feeder unavailable

    Does the document feeder have a limited function mode or is this just for a finisher issue?
  3. Replies
    12
    Views
    694

    Re: Print quality problem C284

    Another case of compatible parts causing issues.

    Go back with the original KM image unit & you should be OK.
  4. Replies
    2
    Views
    171

    Re: Konica c3351/3851 Thoughts?

    The Cxx51 series have a Konica Minolta service mode so are more familiar to work on but pretty much the same engine as the xx50 models.

    However these have been around for a number of years I would...
  5. Replies
    0
    Views
    70

    [Misc] Bizhub C554 Polish language file

    Would anyone have this file they could ping over to please please much appreciated.
  6. Re: LaserJet 2420 grey background

    I had a quick look on eBay & there a loads of new Genuine HP Q6511X 11X cartridges for peanuts.

    HP 11X/Q6511X Toner Cartridge Black SHOP.INSPIRE.CHANGE | eBay
  7. Re: Konica Minolta Bizhub C654 movie data for animation guide

    We are happy to help.

    www.printerfirmware.co.uk
  8. Replies
    2
    Views
    211

    [Misc] Re: Fitting a C256i black drum to a C350i

    If the drum physically fits in the machine but just displays 'incorrect drum' etc I wonder if by swapping over the chip it would work.
  9. Replies
    5
    Views
    313

    Re: c360 background after a few prints

    Replace any image units that are over life & if you don't want to replace them again prematurely replace the crap toner with genuine Konica Minolta.
  10. Replies
    4
    Views
    287

    Re: canon mf6540pl need firmware

    Happy to help we can be contacted at the links below.
  11. Re: LaserJet 2420 grey background - posted on behalf of AlanHK

    All you need to do is simply replace the toner cartridge.

    Only use genuine HP & you will never have this issue again.
  12. Replies
    25
    Views
    1,473

    Re: Ricoh MP C307 Doesn't Work After Moving

    Any tech on here would have this printing in under 5 minutes.
  13. Replies
    2
    Views
    211

    [Misc] Fitting a C256i black drum to a C350i

    Hi all,

    Is it possible to fit a C256i (C-EXV-55) black drum to a C350i (C-EXV 47) they look the same but have different part numbers etc?

    I only ask as I need to replace one on a C350i but...
  14. Replies
    16
    Views
    836

    Re: Biz C3350, C3351 creasing paper

    I agree not a great model & yes these exit rollers are not easy to get at however since you went to the effort of stripping down the machine to gain access I would have replaced them with the...
  15. Replies
    16
    Views
    836

    Re: Biz C3350, C3351 creasing paper

    Since you tried a new/fresh ream of paper you can rule that out.

    Is it creasing or wrinkling the paper ? if it is wrinkling the last half of the page the issue is the exit rollers, the fuser is...
  16. Thread: HDD Error

    by copier tech
    Replies
    6
    Views
    404

    [Error Code] Re: HDD Error

    Hi Paul, we're happy to help with you firmware/animation files should need them. We can be contacted at the links below.
  17. Replies
    8
    Views
    420

    Re: Bizhub 454e GHV-M1

    Have you tried updating to a later version of the mass production firmware?

    50389
  18. Replies
    13
    Views
    886

    Re: C224e Date/Time Stuck

    Yes a 50p battery would have been cheaper & simpler to replace.
  19. Replies
    2
    Views
    202

    Re: C-659, latest firmware?

    Happy to help with the firmware please contact us at the links below.
  20. Replies
    8
    Views
    417

    Re: C-364 won't take firmware....

    Have have a read of this bulletin.

    50370
  21. Replies
    8
    Views
    417

    Re: C-364 won't take firmware....

    Ah I see you are just selling it on donít worry about the firmware if the print quality is good that is all you need to worry about.
  22. Replies
    20
    Views
    1,360

    Re: I-Series belt cleaning units clogging up

    Yes pretty much.

    Konica do have history with developer being pulled into the waste box.
  23. Replies
    8
    Views
    417

    Re: C-364 won't take firmware....

    You are reselling a C364 !?

    Try the 'version up' firmware at least your customer has slightly better hope of scanning etc.
  24. Replies
    20
    Views
    1,360

    Re: I-Series belt cleaning units clogging up

    The waste looks totally black not the usual brown could one would expect.

    What is the colour v black count ratio ?
  25. Replies
    8
    Views
    359

    [CQ] Re: Print defects every few pages

    It looks to me like the drops are random.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4