Search:

Type: Posts; User: blackcat4866

Page 1 of 20 1 2 3 4

Search: Search took 0.11 seconds.

  1. Replies
    7
    Views
    252

    Re: 308 - Fully black prints

    If it was overtoning you would have edge voids. Concentrate on charge. =^..^=
  2. Re: Samsung CLX-6260FW printer prints blank pages.. most of the time

    Remove the glass, and use the drive drum to move the scanner through it's full travel. It should move smoothly. Are the cables crossed over on the drive drum? It's a common mistake to grab the mirror...
  3. Replies
    7
    Views
    252

    Re: 308 - Fully black prints

    Back in the analog days, yes, high voltage loss gave blank images. But at the advent of digital copiers, high voltage loss presents as black images and no voids. Digital copiers charge the drum...
  4. Replies
    7
    Views
    252

    Re: 308 - Fully black prints

    I think the toner density issues you have documented are exactly what you might expect when printing 100% fill black images. So I think you've focused on a consequence, not a cause.

    You did not...
  5. Re: Samsung CLX-6260FW printer prints blank pages.. most of the time

    Good catch. =^..^=
  6. Re: Samsung CLX-6260FW printer prints blank pages.. most of the time

    I haven't worked on this particular Samsung ... or any Samsungs in the last 10 years.

    Typically HVT troubles manifest as:
    Black or single color background, caused by lack of primary charge.
    Bars...
  7. Replies
    6
    Views
    271

    Re: 8508A, E011

    Interesting. I haven't had to do much with 8508A/8518A series transfer belts. Just TBU maintenance kits. Even back to the 6560, 5540, 5520, I do not recall any transfer drive issues. I think I've see...
  8. Re: printer preferences from old machine to new machine

    Did you install an new print driver or are you still using the wrong model print driver for convenience?

    I've seen such issues with Microsoft Office applications, where individual documents save...
  9. Re: Print quality issue when printing pdf from thumb drive(Bizhub C458)

    I can contribute a little:

    There are no adjustments of image quality that I'm aware of. You can select paper source & finishing functions.
    And all electronic images will "Fit Image", first choice...
  10. Replies
    5
    Views
    243

    [Misc] Re: C3070l wrinkling output paper

    When you re-assembled the fuser, and you re-installed shoulder screws ... did the shoulder seat properly into the frame? I saw one the other day, that the last tech replaced the shoulder screw with...
  11. Replies
    10
    Views
    234

    Re: Scan BarCodes on a copier

    Kyocera Hypas can do that, and it can be added to most models of Kyocera. It's probably been 12 years since I tried to do anything like this, so I'm probably not the right guy to provide the details....
  12. Replies
    7
    Views
    373

    Re: 3015AC CA00

    +1 on this. I've MacGuyvered one of these myself. The post that the lever swivels on breaks off. Do I have a photo? Yes:

    4940149400

    I had a shoulder screw just the right size. =^..^=
  13. Re: c654 and c650 finisher output tray going to the floor.

    I'd like to see the photos. =^..^=
  14. Replies
    4
    Views
    241

    [Jamming] Re: Jam FS-536 Location 36

    Can anybody translate this for me? =^..^=
  15. Replies
    3
    Views
    185

    [Jamming] Re: c750i DF-703 feed gear not engaging

    Check the pins that the door swivels on at front & back. I suspect one or both are bent ... maybe during delivery?
    =^..^=
  16. Replies
    7
    Views
    306

    Re: 5002i - C6600

    I'm betting that you did not do the U906 Partial Reset and U163 fuser reset after replacing the fuser. Was it a new fuser unit?

    =^..^=
  17. [CQ] Re: Konica Bizhub Pro 6500 (IKON CPP-650) Color Reg Off Cyan

    So let's see those samples Doug. =^..^=
  18. Replies
    3
    Views
    160

    Re: Es2523 rotate long time

    Why do you think something is wrong?

    What's the current toner level? (Let me guess ... 1%) =^..^=
  19. Replies
    6
    Views
    355

    [Misc] Re: Bizhub C454e not printing correct.

    I'm going to guess that you've got a piece of paper on top of the transfer belt or fed into the primary transfer cleaning unit.

    Try these originals:
  20. [CQ] Re: Konica Bizhub Pro 6500 (IKON CPP-650) Color Reg Off Cyan

    I don't see a color registration issue.

    What kind of readings do you get in Auto Color Registration? Preferably less than 0.9 ... preferably as close as possible to 0.0
    Can you include some...
  21. Replies
    9
    Views
    423

    Re: 307ci with light cyan

    Congratulations on your success! =^..^=
  22. Replies
    11
    Views
    1,188

    [Misc] Re: Ricoh Model Name Guide

    Good question! I was asking the same question just the other day. =^..^=
  23. Thread: Eaglecam

    by blackcat4866
    Replies
    92
    Views
    19,368

    [Video] Re: Eaglecam

    They must be getting to that age when the flea infestation becomes pretty intense. I think that's the main reason they leave the nest is the fleas. From previous years I remember the "wingercizing"...
  24. Replies
    6
    Views
    271

    Re: 8508A, E011

    Also take a look at the exit rollers. On the eS5560CT, it was common for chlorine gas released from paper bleached with chlorine to cause exit rollers to crumble. Original rollers were white....
  25. Replies
    6
    Views
    271

    Re: 8508A, E011

    The transfer belt is not turning, most likely because the transfer waste cleaner is seized. And the waste bottle may be backed up. =^..^=
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4