Search:

Type: Posts; User: mikadonovan

Page 1 of 20 1 2 3 4

Search: Search took 0.03 seconds.

  1. Re: RICOH MP9002, Duplex inverter motor 5804 does not move.

    There may be some sort of hardware binding, like a nearly frozen roller bushing. Put a drop of oil on every one you can reach, and then check for free and easy movement.
  2. Re: MP C5501 SC 547. Blown 15a fuse on PSU

    If it was me, I would replace the fuser just to know for sure that it is not part of the issue.
  3. Re: MP C3003 - toner cartridge out of position

    It is involved.If you do this, be very careful not do drop the tiny springs into the cavity. The yellow is nearly impossible to reach, but I got them in without issue. 1.5 hour. This mod just holds...
  4. Re: Aficio MP C2500 - What causes this printing errors?

    Dots at 80mm, K drum damaged.
  5. Replies
    7
    Views
    228

    Re: Hard Drive on Lanier LD055

    This is for a Ricoh 1060, which I think should be about the same. Old machine.
  6. Replies
    5
    Views
    192

    Re: sending fax to pc program

    How to receive faxes online without a fax machine? (Receive fax to Gmail, Email, Phone, PC, …) - FAX.PLUS Blog

    You will have to buy an online fax number.
  7. Replies
    7
    Views
    332

    Re: C5503 SC 681 11-14

    Thanks, that sucks but it is good to know. I'll keep that in mind. I originally had a magenta error that has not returned since I replaced the cart. The cyan error I recently had has not returned,...
  8. Re: How to choose and write the topic of the essay

    Pretty sure these are the same person, and old Gorgy lists himself as a 22 year old New York technician with 10+ years of experience. Starting a copier career at 12 years old or younger may be...
  9. Replies
    19
    Views
    554

    Re: Black band on Copy from Aficio 1022

    You would think that, but in reality it doesn't always work that way. I have had these pcu's fail within a few hundred prints, and the blade and developer degrade with age, no matter the count.
  10. Replies
    19
    Views
    554

    Re: Black band on Copy from Aficio 1022

    Since there is setoff, drum blade or fuser roller.
  11. Replies
    7
    Views
    332

    Re: C5503 SC 681 11-14

    Thank you, I appreciate the response. This helps. May I ask where this info came from? I scoured the manual but did not find this.
  12. Replies
    7
    Views
    332

    C5503 SC 681 11-14

    Hi, All. I hope your day is going well. I am having intermittent 681 codes on a C5503. The manual describes sub codes as a "device error" I know that the sub codes 11-14 point to the offending toner...
  13. Replies
    21
    Views
    766

    [Misc] Re: Multi-feeding due to static ???

    I recently have had to deal with an account that was experiencing DF multi sheet feeding on all of their machine. Problem was, I could run a SMC report from the machine itself, and it would feed that...
  14. Re: Why I do not post anything political at this part of the forum

    LOL. This pretty much sums it up. Time to put on my tinfoil hat so I don't get zapped by the nutty ray, too.
  15. Replies
    16
    Views
    607

    Re: mpc6004ex only one impression

    I think there is a bulletin that covers the K development unit splotching toner right down the middle of the prints. I know that's not double imaging, but it's all I can think of at the moment.
  16. Re: optics cleaning cloth + platen glass slippery product

    I don't use this much anymore. Newer CIS DF's don't need it.
  17. Replies
    7
    Views
    232

    [Misc] Re: Ricoh W2201 PCL doesnt like PDFs

    Here is an excerpt from the W2201 PSG. No PCL drivers are supported.
  18. Replies
    7
    Views
    232

    [Misc] Re: Ricoh W2201 PCL doesnt like PDFs

    I have always installed wide formats using the PS3 driver, and I have not had any problems with it.
  19. Re: mpc3003 offset (ghost image) after sleeve unit replaced

    Did you perform the procedures listed in tech bulletin 30 as MGA suggested? It specifically addresses this issue.
  20. Replies
    8
    Views
    395

    [Error Code] Re: ERROR SC-681-06 on RICOH MPC401

    There is another thing to consider. The manual states that EM/RF interference will also cause this. I had a c400 that the rfid board was replaced, and it still got codes like that. It was determined...
  21. Replies
    29
    Views
    878

    Re: When print ink come out

    It kinda looks like something may be wrong with the K PDCU. Print a color pattern in printer SP mode. If the problem resides with just the black, that is the issue.
  22. Re: RICOH MP C4502 dirty blade in fuser unit

    Cleaning the stripper plate is a procedure outlined in the manual, and is needed on occasion. More so with aftermarket toner. Nothing unusual.
  23. Re: mpc6004ex as a network device for scans

    This should do it.
  24. Replies
    1
    Views
    159

    Re: W2400 USB host interface board

    Ok, I found out it is for Bluetooth devices, usb keyboards and IC card readers.
  25. Replies
    1
    Views
    159

    W2400 USB host interface board

    I was asked if documents could be printed on this old model from a USB flash drive. I perused the PSG, and there is no mention of printing or scanning using a flash drive. However, it does have the...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4