Search:

Type: Posts; User: copyman

Page 1 of 20 1 2 3 4

Search: Search took 0.03 seconds.

  1. Thread: Bizhub C253

    by copyman
    Replies
    1
    Views
    184

    [Jamming] Re: Bizhub C253

    So you narrowed it down to the paper drawers if manual feed works fine.

    Did you scuff up the shaft and then cleaned or replaced the one way's that paper feed rollers interlock to? Both 1 & 2 paper...
  2. Replies
    4
    Views
    341

    Re: COVID-19 and shortages....

    The word we got was there was a fire at the toner factory in Japan and why the shortage.

    Having to use aftermarket toner for now. Going to try Katun or Copylite. Just hope bad toner doesn't crash...
  3. Re: Any machine with the Internal Finishers...

    Sorry I couldn't be more help but I don't have much experience with them because rather then work on them I removed or swapped them out like you have.

    What's really hard to believe is Kon/Min...
  4. Replies
    25
    Views
    1,877

    Re: Konica Minolta bizhub C360 - Paper Jam 11-01

    Agree about the newer Kon/Min one ways not needing as much attention like some models in the past. Can't tell you how many times I've cleaned the one ways on the BizHub C203 series, definitely 100's...
  5. Replies
    25
    Views
    1,877

    Re: Konica Minolta bizhub C360 - Paper Jam 11-01

    This has been discussed several times on this forum and I agree with you 100% and have done the same thing for many years with scuffing the shaft from end to end direction, cleaning one ways with...
  6. Replies
    10
    Views
    634

    Re: C224E white vertical lines

    What are the consumable life counters ?

    Like the other poster said clean the print head windows with wand clipped on inside front door. Also pull white flags in and out.
  7. Thread: C454

    by copyman
    Replies
    11
    Views
    748

    [Misc] Re: C454

    I thought you can manually set the sizes for the drawers and override Auto size? Touch the paper tray then "change settings" tab right next to it. Know I've done that for the Manual feed tray but...
  8. Thread: Bizhub c451

    by copyman
    Replies
    3
    Views
    296

    Re: Bizhub c451

    After looking at your sample again it could also laser unit or HVPS

    Let me know if you need any parts. I have 2 working C451's that are going to be stripped for parts.
  9. Thread: Bizhub c451

    by copyman
    Replies
    3
    Views
    296

    Re: Bizhub c451

    Could be a few things.

    What have you done so far?

    What are the consumable life counters at? I would look at bad image unit(s) and / or transfer belt first.
  10. Replies
    3
    Views
    224

    [Misc] Re: Konica Minolta C454e Service Manual

    PM me your email and I will send it NO donation needed. I no longer ask for donations for an UN-moderated site. A place where the admin doesn't answer emails and sat back and let politics ruin this...
  11. Replies
    4
    Views
    316

    Re: BHC364 Cyan DV Problem

    Your cyan Dev unit dumped (the most common dev unit to dump). As has been discussed many different posts on this forum "Any color" over life drum or transfer belt can cause a "different" color dev...
  12. [Electrical] Re: Want to delete toner bars from display screen

    I would never leave a lot of toner with my customers. Let customer know you have setup remote care and you will be notified automatically when toners are low. You will ship immediately as needed and...
  13. Replies
    20
    Views
    1,005

    Re: C554e toner refill

    Some of the toner is same, for instance all the 4 series is same. I wouldn't use a different series toner. Like the other poster said why ruin the drums with wrong toner. Forget about the drums, what...
  14. [Electrical] Re: Want to delete toner bars from display screen

    When I deliver machine I tell my customers toner gauges are inaccurate and to disregard. I tell them that machine will give warning when toner low and that is only when to call for toner. I may leave...
  15. [Misc] Re: How to disable the scanner in konica minolta c6501

    Not familiar with that model but most Kon/Min have "isolation" tab in service mode under system 1 or system 2. "UNset" what ever you want to disable.
  16. Replies
    9
    Views
    554

    Re: Konica vs Lexmark

    I know a few of the Kon/Min small machines like the Biz 4750 are made by Lexmark. Didn't know they shared bigger models.
  17. Replies
    9
    Views
    628

    [Misc] Re: KM Engineer Needed

    Will send when I get back into office tomorrow. Not sure if it covers scan to email, mostly setting up the copier like installing the toner, calibrating the doc feeder, etc.
  18. Replies
    9
    Views
    628

    [Misc] Re: KM Engineer Needed

    I'm across the pond or I would help you. If no one replies just wanted you to know these boxes are not that hard to setup / install. I can send you the step by step setup instructions. I know a...
  19. Re: konica minolta 558e doc feeder intermittent jams

    No sure if i understood you but if paper is stopping same place every time look at the mylar guides, dual scan feeder and regular feeder both have these guides and if feeder used enough will get torn...
  20. Re: konica minolta 558e doc feeder intermittent jams

    Look for bent / torn mylar guides in paper path. I just had a few DF701's recently where there was a small tear on the thin black mylar guide and the small piece was catching paper causing...
  21. Replies
    8
    Views
    752

    Re: 4 Series K Toner Shortage info?? (TN321)

    Funny you posted about this. I had heard same thing about the shortage a month ago but for black only. Agree Katun would be only compatible I would have confidence in.

    I've been using the TN512...
  22. Replies
    15
    Views
    932

    Re: Better than I had hoped.

    I haven't bought a "4 series" color Dev unit in years. I've also been able to bring them back to life. The few times had buy Dev unit I used the less expensive black and converted by running 40-60...
  23. Replies
    4
    Views
    292

    Re: kon/min website

    Are you friggin kidding me! Duh really stupid! Right in front of me and thought I checked it. Like my mother use to say "if it was a snake it would of bit you".

    All good. Thanks again
    Take care
  24. Replies
    4
    Views
    292

    kon/min website

    Can someone who has access to the kon/min dealer website point me in the right direction to find the "active solutions". I've looked for over an hour and cannot find it. Last time I downloaded it was...
  25. Replies
    13
    Views
    643

    Re: Bizhub C224e Card Reader

    I have several removed from the C224e & other "4" series. Contact me if you want to buy cheap!
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4