BSD 9.13 (D95/D110/D125 Only),
BSD 9.13A (D136 Only)
[IMG]pws://file/xerox/edoc/95-110-125/icons/arrwup.gif[/IMG]Description
Fail line is to be monitored every 500 milliseconds while ‘NVM 741-045 CleanerIntakeFanFailCycleTime’ from the Cleaner Intake Fan is ON. Then, a failure occurs when stop signal was detected ‘NVM 741-046 CleanerIntakeFanFailTH’ or more. (D95/D110/D125 ONLY)
Fail line is to be monitored every 500 milliseconds while ‘NVM 741-050 CleanerIntakeFanFailCycleTime’ from the Cleaner Intake Fan is ON. Then, a failure occurs when stop signal was detected ‘NVM 741-051 CleanerIntakeFanFailTH’ or more. (D136 ONLY)
[IMG]pws://file/xerox/edoc/95-110-125/icons/arrwup.gif[/IMG] Procedure
[IMG]pws://file/xerox/edoc/95-110-125/icons/caution.gif[/IMG]CAUTIONThe Accessories have their own power cord. Whenever a procedure states to Power Off and then Power On, POPO, etc., powering Off and then powering On the IOT does NOT Power Off the Accessories. The Accessories will have to be Powered Off and then On separately from the IOT by unplugging the Accessory power cord.
Check the following:
Bookmarks