Hi friends, i have a problem with MPC 5502 machine sc285 and i don't have any manual. So anybody can help me
Hi friends, i have a problem with MPC 5502 machine sc285 and i don't have any manual. So anybody can help me
You would get more help if you make a small contribution to CTN
Sc285
Probably just dirty id sensors
Line position adjustment (MUSIC) errorLine position adjustment fails four consecutive times.
• Pattern sampling error ( insufficient image density )
• Defective ID sensors for the line position adjustment
• Defective image transfer belt unit
• Defective PCDU(s)
Defective laser optics housing unit
1. Check and reinstall the image transfer belt unit and PCDUs.
2. Check if each toner bottle has enough toner.
3. Replace the ID sensor.
4. Replace the image transfer belt unit.
5. Replace the PCDU(s).
6. Replace the laser optics housing unit.
Regards Mark
FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.
RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.
https://copierservices.simdif.com
Almost every time I have had SC285 on any model Ricoh color model it has been either a dirty or bad ID sensor.
Ricoh MPC4502-5502 (D143-D144)) (Service manual, parts list)
Ricoh_MPC_4502-5502_(D143-D144).rar — Yandex.Disk
Good luck 🍀
Bookmarks